Searched for: +
(1 - 20 of 116)

Pages

document
Wu, Xiong-Jian (author), Wang, Yigong (author), Price, W.G. (author)
journal article 1988
document
Wu, Y. (author), Li, X.W. (author), Song, G.M. (author), Wang, Y.M. (author), Narita, T. (author)
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal (SC) Ni-based TMS-82+ superalloy is studied under cyclic air at 900ºC for 200 h to assess the oxidation resistance. Regardless of the coating processing, Ni–Al coating is effective in improving the oxidation resistance due to the formation of a...
journal article 2010
document
Lu, W. (author), Liu, A. (author), Wang, H. (author), Wu, Z. (author)
While heated discussions have been directed towards various innovative procurement systems such as PPP, PFI, and BOT that carry the great expectation to help materialise the projects and deliver value to the society, a procurement system named agent-construction system (ACS or in Chinese Dai Jian Zhi) is being prevailing in China’s public...
conference paper 2011
document
Wu, Y. (author), Wang, Y.M. (author), Song, G.M. (author), Li, X.W. (author)
Oxidation behavior of a Re-based diffusion barrier/Ni–Al coated single-crystal (SC) Ni-based TMS-82+ superalloy was studied to compare with those of the base and Ni–Al coated superalloys under cyclic air at 1150 °C for 200 h. The base superalloy showed a negative mass gain due to extensive oxide spallation, and the Ni–Al coated superalloy...
journal article 2011
document
Li, C. (author), Chen, J.H. (author), Wu, X. (author), Wang, W. (author), Van der Zwaag, S. (author)
journal article 2012
document
Li, W. (author), Wang, Z.B. (author), Van Maren, D.S. (author), De Vriend, H.J. (author), Wu, B.S. (author)
conference paper 2013
document
Li, W. (author), Wang, Z.B. (author), Van Maren, D.S. (author), De Vriend, H.J. (author), Wu, B.S. (author)
River floods are usually featured by a downstream flattening discharge peak whereas a downstream increasing discharge peak is observed at a rate exceeding the tributary discharge during highly silt-laden floods (hyperconcentrated floods) in China’s Yellow River. It entails a great challenge in the downstream flood defence and the underlying...
journal article 2014
document
Liu, Zizheng (author), Guo, Yizhou (author), Shang, R. (author), Fang, Zheng (author), Wu, Feng (author), Wang, Zongping (author)
We report herein the use of ferric iron (Fe 3 + ) and sulfite (SO 3 2 −) to activate persulfate (S 2 O 8 2 −). Decolorization and mineralization of reactive Brilliant Red X-3B (a model azo dye) by an Fe(III)/sulfite/persulfate triple system have been investigated in aqueous solutions. Initial pH and dis- solved oxygen are important factors...
journal article 2016
document
Yin, L.J. (author), Dong, Juntao (author), Wang, Yinping (author), Zhang, Bi (author), Zhou, Zheng Yang (author), Jian, Xian (author), Wu, Mengqiang (author), Xu, Xin (author), van Ommen, J.R. (author), Hintzen, H.T.J.M. (author)
Many strategies have been adopted to improve thermal degradation of phosphors. Because of the stability and high transmittance of graphene, here we report a novel method of carbon coating on BaMgAl<sub>10</sub>O<sub>17</sub>:Eu<sup>2+</sup> (BAM) phosphor particles through chemical vapor deposition. The chemical composition, microstructure,...
journal article 2016
document
Xie, Dongfeng (author), Gao, Shu (author), Wang, Zhengbing (author), Pan, Cunhong (author), Wu, Xiuguang (author), Wang, Qiushun (author)
We investigate the evolution of a large-scale sand body, a unique type of sandbars in a convergent estuary. Specifically, we analyze and simulate the sand deposition system (defined as an inside bar) in the Qiantang Estuary (QE) in China. The deposit is 130 km long and up to 10 m thick, and is characterized by a dextral morphology in the lower...
journal article 2017
document
Qin, Lilong (author), Wu, Manqing (author), Wang, X. (author), Dong, Zhen (author)
Motivated by the sparsity of filter coefficients in full-dimension space-Time adaptive processing (STAP) algorithms, this paper proposes a fast ℓ1-regularized STAP algorithm based on the alternating direction method of multipliers to accelerate the convergence and reduce the calculations. The proposed algorithm uses a splitting variable to...
journal article 2017
document
Xie, DF (author), Pan, CH (author), Wu, Xiuguang (author), Gao, S (author), Wang, Zhengbing (author)
The research objective is to investigate the variations of sediment transport in outer Changjiang Estuary and adjacent Hangzhou Bay, induced by the decline of Changjiang River sediment discharge and massive land reclamation in the last three decades. A synchronous hydrographic survey was conducted along two transects (at the bay-mouth and outer...
journal article 2017
document
Wu, Min (author), Springeling, Geert (author), Lovrak, M. (author), Mastik, Frits (author), Iskander-Rizk, Sophinese (author), Wang, Tianshi (author), Van Beusekom, Heleen M.M. (author), van der Steen, A.F.W. (author), van Soest, G. (author)
Lipid deposition can be assessed with combined intravascular photoacoustic/ultrasound (IVPA/US) imaging. To date, the clinical translation of IVPA/US imaging has been stalled by a low imaging speed and catheter complexity. In this paper, we demonstrate imaging of lipid targets in swine coronary arteries in vivo, at a clinically useful frame...
journal article 2017
document
Zhang, Xinying (author), Wu, Yan (author), Xiao, Gao (author), Tang, Zhenping (author), Wang, Meiyin (author), Liu, Fuchang (author), Zhu, X. (author)
Azo dyes are very resistant to light-induced fading and biodegradation. Existing advanced oxidative pre-treatment methods based on the generation of non-selective radicals cannot efficiently remove these dyes from wastewater streams, and post-treatment oxidative dye removal is problematic because it may leave many byproducts with unknown...
journal article 2017
document
Wang, Tianshi (author), Pfeiffer, Tom (author), Wu, Min (author), Wieser, Wolfgang (author), Amenta, Gaetano (author), Draxinger, Wolfgang (author), van der Steen, A.F.W. (author), Huber, Robert (author), Van Soest, Gijs (author)
The absorption of nanosecond laser pulses induces rapid thermo-elastic deformation in tissue. A sub-micrometer scale displacement occurs within a few microseconds after the pulse arrival. In this Letter, we investigate the laser-induced thermo-elastic deformation using a 1.5 MHz phase-sensitive optical coherence tomography (OCT) system. A...
journal article 2017
document
Xie, Dongfeng (author), Pan, Cunhong (author), Wu, Xiuguang (author), Gao, Shu (author), Wang, Zhengbing (author)
We investigate the morphological responses of the Hangzhou Bay, China, located immediately south of the Changjiang Estuary, to the drastic reduction of the sediment load from the Changjiang River and the large-scale coastal embankment schemes over past decades. The spatial patterns of deposition and erosion, sediment volume changes, and the...
journal article 2017
document
Wang, Weiming (author), Liu, Yong-Jin (author), Wu, J. (author), Tian, Shengjing (author), Wang, C.C. (author), Liu, Ligang (author), Liu, Xiuping (author)
Offsetting-based hollowing is a solid modeling operation widely used in 3D printing, which can change the model's physical properties and reduce the weight by generating voids inside a model. However, a hollowing operation can lead to additional supporting structures for fabrication in interior voids, which cannot be removed. As a consequence...
journal article 2018
document
Yi, Ran (author), Wu, Chenming (author), Liu, Yong-Jin (author), He, Ying (author), Wang, C.C. (author)
This paper presents a 3-D printing system that uses a low-cost off-the-shelf consumer projector to fabricate large models. Compared with traditional digital light processing (DLP) 3-D printers using a single vertical carriage, the platform of our DLP 3-D printer using delta mechanism can also move horizontally in the plane. We show that this...
journal article 2018
document
Sun, Chuan (author), Wu, Chaozhong (author), Chu, Duanfeng (author), Lu, Z. (author), Tan, Jian (author), Wang, Jianyu (author)
This paper aims to recognize driving risks in individual vehicles online based on a data-driven methodology. Existing advanced driver assistance systems (ADAS) have difficulties in effectively processing multi-source heterogeneous driving data. Furthermore, parameters adopted for evaluating the driving risk are limited in these systems. The...
journal article 2018
document
Liu, Xiuping (author), Lin, Liping (author), Wu, J. (author), Wang, W. (author), Yin, Baocai (author), Wang, C.C. (author)
Wireframe models are becoming a popular option in 3D printing. Generating sparse wireframe models using classic mesh simplification methods leads to models that require a lot of support structures in the layer-upon-layer additive process. In this paper we present a mesh simplification method that takes into account the overhang angle....
journal article 2018
Searched for: +
(1 - 20 of 116)

Pages