From cyclic sand ratcheting to tilt accumulation of offshore monopiles: 3D FE modelling using SANISAND-MS

Serviceability criteria for offshore monopiles include the estimation of long-term, permanent tilt under repeated operational loads. In the lack of well-established analysis methods, experimental and numerical research has been carried out in the last decade to support the fundamental understanding of monopile-soil interaction mechanisms, and...

New insights into the failure mechanisms of horizontal plate anchors in clay during pull-out

Offshore wind developments are moving towards deep-water regions where energy is abundant, visual impact is minimised and the larger turbine sizes can make the energy production more cost-effective. One of the key challenges facing the industry is the development of reliable substructures. While fixed foundation systems are widely used for...

Field experiments at three sites to investigate the effects of age on steel piles driven in sand

This paper investigates the influences that steel type, in situ soil properties, water table depth, pile diameter, roughness and driving procedures have on the ageing behaviour of piles driven in sand. Tension tests have been performed on 51 open-ended steel micro-piles, with 48 to 60 mm outside diameter, driven at well-established research...

PISA design model for monopiles for offshore wind turbines: Application to a stiff glacial clay till

Offshore wind turbines in shallow coastal waters are typically supported on monopile foundations. Although three-dimensional (3D) finite-element methods are available for the design of monopiles in this context, much of the routine design work is currently conducted using simplified one-dimensional (1D) models based on the p-y method. The p-y...

Finite-element modelling of laterally loaded piles in a stiff glacial clay till at Cowden

The PISA project was a combined field testing/numerical modelling study with the aim of developing improved design procedures for large-diameter piles subjected to lateral loading. This paper describes the development of a three-dimensional finite-element model for the medium-scale pile tests that were conducted in Cowden till as part of the...

Monotonic laterally loaded pile testing in a stiff glacial clay till at Cowden

This paper describes the results obtained from a field testing campaign on laterally loaded monopiles conducted at Cowden, UK, where the soil consists principally of a heavily overconsolidated glacial till. These tests formed part of the PISA project on the development of improved design methods for monopile foundations for offshore wind...

Monotonic laterally loaded pile testing in a dense marine sand at Dunkirk

The results obtained from a field testing campaign on laterally loaded monopiles, conducted at a dense sand site in Dunkirk, northern France are described. These tests formed part of the PISA project on the development of improved design methods for monopile foundations for offshore wind turbines. Results obtained from monotonic loading tests...

PISA design model for monopiles for offshore wind turbines: Application to a marine sand

This paper describes a one-dimensional (1D) computational model for the analysis and design of laterally loaded monopile foundations for offshore wind turbine applications. The model represents the monopile as an embedded beam and specially formulated functions, referred to as soil reaction curves, are employed to represent the various...

New data analysis methods for instrumented medium-scale monopile field tests

The PISA Joint Industry Research Project was concerned with the development of improved design methods for monopile foundations in offshore wind applications. PISA involved large-scale pile tests in overconsolidated glacial till at Cowden, north-east England, and in dense, normally consolidated marine sand at Dunkirk, northern France. This...

Modelling the cyclic ratcheting of sands through memory-enhanced bounding surface plasticity

The modelling and simulation of cyclic sand ratcheting is tackled by means of a plasticity model formulated within the well-known critical state, bounding surface SANISAND framework. For this purpose, a third locus – termed the ‘memory surface’ – is cast into the constitutive formulation, so as to phenomenologically capture micro-mechanical,...

Lateral response of rigid monopiles subjected to cyclic loading: Centrifuge modelling

In this study, a total number of 20 centrifuge tests were carried out to investigate monopile behaviour under lateral cyclic loading. The instrumented model pile simulates an offshore wind turbine foundation with an embedment ratio of 5 installed in sand layers with two relative densities of 80% and 50%. The influence of the directional...