Pages
- 1
- 2
- document
-
Lu, T. (author), Wang, Ruizhi (author), Tang, Z. (author), Zou, Yiwei (author), Yue, X. (author), Liang, Yansong (author), Gong, Haoran (author), Liu, Shurui (author), Chen, Zhiyuan (author), Liu, Xun (author), Du, S. (author)This article presents a 10mV-startup-voltage thermoelectric energy harvesting system, assisted by a piezoelectric generator (PEG) as a cold starter. It exploits the fact that when a thermoelectric energy harvesting system is implemented in a place where kinetic energy is also present, the PEG starter can provide a clock signal to start the...journal article 2024
- document
-
Chen, E. (author), Zhu, Yan (author), Liang, K. (author), Yin, Hongjian (author)The increasing popularity of remote Cloud File Sharing (CFS) has become a major concern for privacy breach of sensitive data. Aiming at this concern, we present a new resource sharing framework by integrating enterprise-side Attribute-Based Access Control/eXtensible Access Control Markup Language (ABAC/XACML) model, client-side Ciphertext...journal article 2023
- document
-
Liu, C. (author), Liang, X. (author), Chen, Y. (author), Li, Z. (author), Ye, G. (author)In this study, the impacts of tap water immersion on the pore solution, phase assemblages, gel chemistry and structure, and pore structure of alkali-activated slag (AAS) pastes were studied. AAS degrades under such condition and the potential mechanisms can be concluded as lower reaction rates, gel decomposition and carbonation. The leaching...journal article 2023
- document
-
He, S. (author), Chen, Y. (author), Liang, M. (author), Yang, En-Hua (author), Schlangen, E. (author)This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a...journal article 2023
- document
-
Bai, Wei (author), Xu, X. (author), Liu, Yaolan (author), Liang, Yunxiao (author), Shen, Yijie (author), Han, Zhenyu (author), Sheng, Zhendong (author), Chen, Rong (author), Zhu, Minhao (author)Systematic experimental investigations were conducted to study the microstructures and impact toughness of each heat affected zone (HAZ) formed during rail flash-butt welding. A high-strength carbide-free bainitic rail steel was subjected to different thermal simulation cycles to separately reproduce each HAZ subzone by tailoring the peak...journal article 2023
- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...journal article 2023
- document
-
Lu, T. (author), Liang, X. (author), Liu, C. (author), Chen, Y. (author), Li, Z. (author)This study experimentally investigated the effects of surfactants and water-repelling agents on the hydration process, relative humidity, and mechanical properties of Portland cement pastes. Based on the measurement results, the degree of hydration, degree of saturation, capillary tension of autogenous shrinkage, and magnitude of autogenous...journal article 2023
- document
-
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...journal article 2023
- document
-
Chen, B. (author), Zuo, Yibing (author), Zhang, Shizhe (author), Miranda de Lima Junior, L.C. (author), Liang, X. (author), Chen, Y. (author), van Zijl, Marc Brito (author), Ye, G. (author)This work evaluated the reactivity and leaching potential of municipal solid waste incineration (MSWI) bottom ash as supplementary cementitious material (SCM) and precursor for alkali-activated materials (AAM). The chemical composition of the amorphous phase in MSWI bottom ash was found to be in the same range as that of Class F coal fly ash....journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Cementitious materials may exhibit significant creep at very early age. This is potentially important for concrete 3D printing, where the material is progressively loaded even before it sets. However, does creep actually affect the buildability of 3D printed concrete? Herein, the influence of early-age creep on the buildability of 3D printed...journal article 2023
- document
-
Chen, Y. (author), Liang, M. (author), Zhang, Y. (author), Li, Z. (author), Šavija, B. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....journal article 2023
- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, M. (author), Zhang, Yamei (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Limestone-calcined clay-cement (LC3), as one of the most promising sustainable cements, has been under development over the past decade. However, many uncertainties remain regarding its rheological behaviors, such as the metakaolin content of calcined clay. This study aims to investigate the effect of increasing the content of fine-grained...journal article 2023
- document
-
Xu, Peng (author), Susilo, Willy (author), Wang, Wei (author), Chen, Tianyang (author), Wu, Qianhong (author), Liang, K. (author), Jin, Hai (author)Dynamic searchable symmetric encryption (DSSE) has been widely recognized as a promising technique to delegate update and search queries over an outsourced database to an untrusted server while guaranteeing the privacy of data. Many efforts on DSSE have been devoted to obtaining a good tradeoff between security and performance. However, it...journal article 2022
- document
-
Liang, M. (author), Chang, Z. (author), He, S. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)Early-age stress (EAS) is an important index for evaluating the early-age cracking risk of concrete. This paper encompasses a thermo-chemo-mechanical (TCM) model and active ensemble learning (AEL) for predicting the EAS evolution. The TCM model provides the data for the AEL model. First, based on Fourier's law, Arrhenius’ equation, and rate...journal article 2022
- document
-
Liang, Jianwen (author), van der Maas, E.L. (author), Luo, Jing (author), Li, Xiaona (author), Chen, Ning (author), Adair, Keegan R. (author), Li, Weihan (author), Li, Junjie (author), Hu, Yongfeng (author), Liu, Jue (author), Zhang, Li (author), Zhao, W. (author), Parnell, S.R. (author), Ganapathy, S. (author), Wagemaker, M. (author)Understanding the relationship between structure, ionic conductivity, and synthesis is the key to the development of superionic conductors. Here, a series of Li<sub>3-3</sub><sub>x</sub>M<sub>1+</sub><sub>x</sub>Cl<sub>6</sub> (−0.14 < x ≤ 0.5, M = Tb, Dy, Ho, Y, Er, Tm) solid electrolytes with orthorhombic and trigonal structures are...journal article 2022
- document
-
Chen, Jiazhou (author), Xu, Yanghui (author), Lu, Shufang (author), Liang, Ronghua (author), Nan, L. (author)We present a novel 3-D instance segmentation framework for multiview stereo (MVS) buildings in urban scenes. Unlike existing works focusing on semantic segmentation of urban scenes, the emphasis of this work lies in detecting and segmenting 3-D building instances even if they are attached and embedded in a large and imprecise 3-D surface model....journal article 2022
- document
-
He, Cyuan Lun (author), Liang, Fang Cheng (author), Veeramuthu, Loganathan (author), Cho, Chia Jung (author), Benas, Jean Sebastien (author), Tzeng, Yung Ru (author), Tseng, Yen Lin (author), Chen, Wei Cheng (author), Rwei, A.Y. (author), Kuo, Chi Ching (author)Self-healing soft electronic material composition is crucial to sustain the device long-term durability. The fabrication of self-healing soft electronics exposed to high moisture environment is a significant challenge that has yet to be fully achieved. This paper presents the novel concept of a water-assisted room-temperature autonomous self...journal article 2021
- document
-
Li, Z. (author), Liang, X. (author), Chen, Y. (author), Ye, G. (author)The high autogenous shrinkage of alkali-activated materials made from slag and fly ash is recognised as a major drawback with regard to the use as construction materials. In this study, metakaolin was introduced into the alkali-activated slag-fly ash (AASF) paste to mitigate the autogenous shrinkage. The shrinkage mitigation mechanism of...journal article 2021
- document
-
Ma, Jiliang (author), van Ommen, J.R. (author), Liu, Daoyin (author), Mudde, R.F. (author), Chen, Xiaoping (author), Wagner, E.C. (author), Liang, Cai (author)Due to the presence of inter-particle cohesive force, cohesive particles reveal totally different fluidization behaviors as compared to the non-cohesive system. This paper studies the fluidization dynamics of Geldart B particles with varying thermal-induced cohesive forces. Multi-source X-ray tomography was applied to reconstruct 3D temporal...journal article 2019
- document
-
Zhang, Weizhao (author), Bostanabad, Ramin (author), Liang, Biao (author), Su, Xuming (author), Zeng, Danielle (author), Bessa, M.A. (author), Wang, Yanchao (author), Chen, Wei (author), Cao, Jian (author)Carbon fiber reinforced plastics (CFRPs) are attracting growing attention in industry because of their enhanced properties. Preforming of thermoset carbon fiber prepregs is one of the most common production techniques of CFRPs. To simulate preforming, several computational methods have been developed. Most of these methods, however, obtain...journal article 2019
Pages
- 1
- 2