Searched for: +
(1 - 20 of 38)

Pages

document
Wan, Z. (author), Xu, Y. (author), Chang, Z. (author), Liang, M. (author), Šavija, B. (author)
Vascular self-healing concrete (SHC) has great potential to mitigate the environmental impact of the construction industry by increasing the durability of structures. Designing concrete with high initial mechanical properties by searching a specific arrangement of vascular structure is of great importance. Herein, an automatic optimization...
journal article 2024
document
Chen, Chao (author), Chen, Hang (author), Mo, Li (author), Xiao, Shenbin (author), Li, Changjun (author), Yang, M. (author), Reniers, G.L.L.M.E. (author)
Fire-induced domino effect is one of the main threats to hazardous material storage tanks, and many attempts have been conducted to assess the vulnerability of storage tanks exposed to fire to evaluate domino effect risk. However, past research ignored the influence of wind load on the thermal buckling behavior of storage tanks exposed to...
journal article 2024
document
Xiao, Tian (author), Zhang, Qiaoling (author), Yang, Xiaohu (author), Hooman, K. (author), Li, Guodong (author)
It is indicated that the solder joint of the metal fibrous materials is a critical factor impacting the heat conduction. To reveal the mechanism by which solder joint sizes, solder joint skips, solder flux materials, and filling media affect the thermal conductivity of fibres, pore-scale numerical simulation is employed to study the thermal...
journal article 2023
document
Wan, Z. (author), Chang, Z. (author), Xu, Y. (author), Šavija, B. (author)
In this paper, optimization of vascular structure of self-healing concrete is performed with deep neural network (DNN). An input representation method is proposed to effectively represent the concrete beams with 6 round pores in the middle span as well as benefit the optimization process. To investigate the feasibility of using DNN for...
journal article 2023
document
Pineda Quijano, D.F. (author), Infante Ferreira, C.A. (author), Brück, E.H. (author)
The development of affordable magnetocaloric materials (MCM) with a giant magnetocaloric effect (MCE) has brought magnetocaloric heat pumps a step closer to commercialization. The narrow temperature range in which these materials exhibit a large MCE demands the use of several materials with Curie temperatures covering the temperature span of...
journal article 2023
document
Sturm, G.S.J. (author), van der Wurff, A. (author), Linnenbank, S. (author), Bonnet, J. (author), Koppert, A. (author)
Thermal pathogen suppression in glasshouse horticulture by treatment with steam generated through combustion of fossil fuel will become progressively less desirable. Radio wave treatment could be an alternative. It has several advantages, the most notable is that it generates heat where it is needed in soil, so that it avoids heat losses and...
journal article 2023
document
Ebrahimi, Amin (author), Hermans, M.J.M. (author)
Laser butt welding of thin metal sheets is a widely used fusion-based joining technique in industrial manufacturing. A comprehensive understanding of the complex transport phenomena during the welding process is essential for achieving high-quality welds. In the present work, high-fidelity numerical simulations are employed to investigate the...
journal article 2023
document
Yang, Yueming (author), Wang, Xurong (author), Hooman, K. (author), Han, Kuihua (author), Xu, Jinliang (author), He, Suoying (author), Qi, Jianhui (author)
Recently, the supercritical carbon dioxide (SCO<sub>2</sub>) power cycle has become a hotspot in the field of energy-efficient utilization. The utilization of additives in the power cycle has been proven to be an effective way to improve the SCO<sub>2</sub> power cycle efficiency. As one of the core components of the system, the influence of...
journal article 2023
document
Hunziker, J. (author), Slob, E.C. (author), Irving, J. (author)
Modeling ground penetrating radar (GPR) reflection data on glaciers with methods that require the discretization of the full subsurface domain is extremely computationally expensive because of the combination of a large domain size and the comparatively short wavelength of the signal. To address this issue, we build on and extend a previously...
journal article 2023
document
Peng, Shaoyuan (author), Liu, Y. (author), Li, Renge (author), Wei, Ying (author), Chan, Pak Wai (author), Li, Sunwei (author)
Simulating a typhoon’s wind field via mesoscale models is important in terms of providing not only the guidelines for urban planning and onshore/offshore constructions, but also the provision of insight into the dynamics and thermodynamics of tropical cyclone systems. Therefore, the errors that are contained in simulation results were...
journal article 2022
document
Yao, Dengzhi (author), Wang, Ju (author), Cai, Yao (author), Zhao, Tingting (author), An, Xizhong (author), Zhang, Hao (author), Fu, Haitao (author), Yang, Xiaohong (author), Zou, Qingchuan (author), Wang, L. (author)
Understanding and controlling the composition segregation during powder spreading is of key importance in the additive manufacturing (AM) of composite materials. Under this circumstance, the segregation behavior of WC/316 L composite powders during spreading in laser powder bed fusion (LPBF) AM was numerically investigated by the discrete...
journal article 2022
document
Karamitopoulos, P. (author), Donselaar, M.E. (author), Weltje, G. J. (author), van Toorenenburg, K. A. (author)
An advection–diffusion model of fluvial processes was used to analyze the stratigraphic expression of avulsions in terminal river systems and understand their control on basin-fill architecture. The initial and boundary conditions of the model runs (i.e., catchment area, smoothed initial topographic surface, grain-size distribution and...
journal article 2022
document
van As, K. (author), Simons, Bram A. (author), Kleijn, C.R. (author), Kenjeres, S. (author), Bhattacharya, N. (author)
We study how the speckle contrast depends on scatterer velocity, with the goal of further developing laser speckle imaging as a quantitative measurement technique. To that end, we perform interferometric computer simulations on a dilute plug flow. The results of our numerical experiment, that we compare with known analytical expressions to...
journal article 2022
document
Mi, Jie (author), Zhang, Min (author), Zhu, Zhenchang (author), Vuik, V. (author), Wen, Jiahong (author), Gao, Hongkai (author), Bouma, Tjeerd J. (author)
The risk of coastal storm flooding is deteriorating under global warming, especially for the heavily urbanized deltaic cities, like Shanghai. The Nature-Based Flood Defense (NBFD), as an eco-friendly design alternative for hard infrastructure against coastal flooding, is gaining attention. Nevertheless, the vulnerability of saltmarsh due to...
journal article 2022
document
Wan, Z. (author), Xu, Y. (author), Zhang, Y. (author), He, S. (author), Šavija, B. (author)
Cracking is one of the main causes for deterioration of concrete structures. Self-healing concrete with 3D-printed vascular networks has excellent potential for autonomous self-healing. This approach is scarcely investigated: no studies have been devoted to the influence of printing parameters on the properties of vascular based self-healing...
journal article 2022
document
Jamalinia, E. (author), Sadeghi Tehrani, F. (author), Steele-Dunne, S.C. (author), Vardon, P.J. (author)
Climatic conditions and vegetation cover influence water flux in a dike, and potentially the dike stability. A comprehensive numerical simulation is computationally too expensive to be used for the near real-time analysis of a dike network. Therefore, this study investigates a random forest (RF) regressor to build a data-driven surrogate for a...
journal article 2021
document
Wang, Y. (author), Voskov, D.V. (author), Khait, M. (author), Saeid, S. (author), Bruhn, D.F. (author)
A realistic deep low-enthalpy geothermal reservoir based on real data with high detail and complicated sedimentary structure is utilized to perform sensitivity analyses of the geological features influencing reservoir properties. We perform simulations using the Delft Advanced Research Terra Simulator (DARTS). Compelling numerical performance...
journal article 2021
document
Zuo, Y. (author), Ye, G. (author)
For the first time, this study developed a novel model, named GeoMicro3D, to simulate the reaction process and microstructure formation of alkali-activated slag. The GeoMicro3D model consists of four modules that are designed to simulate, respectively: (i) the initial spatial distribution of real-shape slag particles in alkaline activator, ...
journal article 2021
document
Kong, Xiangshao (author), Zhou, Hu (author), Kuang, Zheng (author), Zheng, Cheng (author), Li, X. (author), Wu, Weiguo (author), Guan, Zhongwei (author)
Test on a small scaled model is an effective approach to predict the dynamic response of full scale structure under blast loadings. However, the geometric dimensions of specimens cannot simply comply with complete geometrical similarity due to manufacture or test restrictions. It would result in the difference structural performance between...
journal article 2021
document
Xu, Y. (author), Schlangen, E. (author), Lukovic, M. (author), Šavija, B. (author)
This research presents an investigation of the compressive behavior of auxetic cementitious cellular composites (CCCs) using a combination of experiments and finite element (FE) simulations. Typical auxetic centrosymmetric geometry was used as unit cells for the cellular structure and fiber reinforced cementitious mortar were used as...
journal article 2020
Searched for: +
(1 - 20 of 38)

Pages