Molecular dynamics simulations on mechanical behaviors of sintered nanocopper in power electronics packaging

Nano-metal materials have received considerable attention because of their promising performance in wide bandgap semiconductor packaging. In this study, molecular dynamics (MD) simulation was performed to simulate the nano-Cu sintering mechanism and the subsequent mechanical behaviors. Hybrid sintering, comprising nanosphere (NS) and...

A 72-Channel Resistive-and-Capacitive Sensor-Interface Chip With Noise-Orthogonalizing and Pad-Sharing Techniques

The growing trend of the Internet of Things (IoT) involves trillions of sensors in various applications. An extensive array of parameters need to be gathered concurrently with high-precision, low-cost, and low-power sensor nodes, such as resistive (R) and capacitive (C) sensors. Single-chip channel fusion can be an effective solution, while...

Modelling preferential flow induced by dynamic changes of desiccation cracks: A comparative numerical study

Quantitative investigation on the preferential flow induced by desiccation cracks (PF-DC) remains a great challenge due to the soil shrinking-swelling behavior. This work presents a series of comparative numerical studies to investigate the accuracy and substitutability of different models in simulating the water flux, hydrological response...

A novel 4H-SiC multiple stepped SGT MOSFET with improved high frequency figure of merit

A novel 4H-SiC Multiple Stepped SGT MOSFET (MSGT-MOSFET) is presented and investigated utilizing TCAD simulations in this paper. We have quantitatively studied the characteristics of the device through simulation modeling and physical model calculations, and comparatively analyzed the performance and application prospects of this novel device...

Effect of particle size distribution on the pre-hydration, hydration kinetics, and mechanical properties of calcium sulfoaluminate cement

The particle size distribution (PSD) has a significant influence on the fresh and final properties of cement and its derived products. In this paper, CSA cements with three different mean diameters (D₅₀), ranging from 6.04 to 26.62 μm were prepared by milling. The pre-hydration behavior was quantitatively analyzed, including the...

Laser-Induced Graphene Formation on Chitosan Derivatives toward Ecofriendly Electronics

Laser-induced graphene (LIG) has aroused a wide range of research interests ranging from micro-nano energy devices to the Internet of Things (IoT). Nevertheless, the non-degradability of most-used synthetic polymer carbon sources poses a serious threat to the environment. In this work, ecofriendly chitosan-based derivatives, including...

Effects of dynamic changes of desiccation cracks on preferential flow: experimental investigation and numerical modeling

Preferential flow induced by desiccation cracks (PF-DC) has been proven to be an important hydrological effect that could cause various geotechnical engineering and ecological environment problems. Investigation on the PF-DC remains a great challenge due to the soil shrinking–swelling behavior. This work presents an experimental and numerical...

Engineering ketoreductases for the enantioselective synthesis of chiral alcohols

The use of engineered ketoreductases (KREDS), both as whole microbial cells and isolated enzymes, in the highly enantiospecific reduction of prochiral ketones is reviewed. The homochiral alcohol products are key intermediates in, for example, pharmaceuticals synthesis. The application of sophisticated protein engineering and enzyme...

Towards weathering and corrosion resistant, self-warning and self-healing epoxy coatings with tannic acid loaded nanocontainers

In this work, an active protective epoxy coating with weathering resistant, corrosion-warning, and self-healing properties was developed by incorporating tannic acid (TA) loaded mesoporous silica (MSN-TA) nanocontainers. The introduction of MSN-TA nanocontainers could alleviate the coating degradation via scavenging the radicals generated...

Investigation of Unclamped Inductive Switch Characteristics in 4H-SiC MOSFETs With Different Cell Topologies

To investigate the unclamped inductive switch (UIS) characteristics, 1200 V silicon carbide (SiC) planar MOSFETs with four cell topologies of linear, current sharing linear, square, and hexagon are designed and manufactured. The experimental platform was built and tested. The results show that the single pulse avalanche energy density of the...

A Load-Carrier Perspective Method for Evaluating Land Resources Carrying Capacity

If land resources are forced to withstand greater populations than they are able to withstand, irreversible damage to the land resources system will happen in a specific region. This challenge highlights the urgency of appropriately evaluating the land resources carrying capacity (LRCC). A proper level of the capacity can ensure that land...

A Crystal-Less Clock Generation Technique for Battery-Free Wireless Systems

The size of wireless systems is required to be reduced in many applications, such as ultra-low-power sensor nodes and wearable/implantable devices, where battery and crystal are the two main bottlenecks in system miniaturization. In recent years, battery-free radios based on wireless power transfer (WPT) have shown great potential in...

A Series of Ternary Metal Chloride Superionic Conductors for High-Performance All-Solid-State Lithium Batteries

Understanding the relationship between structure, ionic conductivity, and synthesis is the key to the development of superionic conductors. Here, a series of Li_3-3_xM₁₊_xCl₆ (−0.14 < x ≤ 0.5, M = Tb, Dy, Ho, Y, Er, Tm) solid electrolytes with orthorhombic and trigonal structures are...

Implications of nutrient enrichment and related environmental impacts in the pearl river estuary, china: Characterizing the seasonal influence of riverine input

The Pearl River estuary is an ecologically dynamic region located in southern China that experiences strong gradients in its biogeochemical properties. This study examined the seasonality of nutrient dynamics, identified related environmental responses, and evaluated how river discharge regulated nutrient sink and source. The field...

"on Water" Direct Organocatalytic Cyanoarylmethylation of Isatins for the Diastereoselective Synthesis of 3-Hydroxy-3-cyanomethyl Oxindoles

An "on water" organocatalytic cyanoarylmethylation of aryl acetonitrile to isatins is developed, giving products in high yields and up to excellent diastereoselectivities. A remarkable enhancement of reaction rates and diastereoselectivities by water was observed under mild conditions. Moreover, this approach provides a highly efficient and...

Mapping surface deformation and thermal dilation of arch bridges by structure-driven multi-temporal DInSAR analysis

Arch bridges are important transportation infrastructures widely distributed in China, but they are prone to structural defects due to aging without routine inspection and maintenance. Therefore, Structural Health Monitoring (SHM) of these bridges is urgently needed by civil engineers to effectively reduce the risk of bridge damage or...

Coupled hygro-mechanical finite element method on determination of the interlaminar shear modulus of glass fiber-reinforced polymer laminates in bridge decks under hygrothermal aging effects

To investigate the mechanical degradation of the shear properties of glass fiber-reinforced polymer (GFRP) laminates in bridge decks under hygrothermal aging effects, short-beam shear tests were performed following the ASTM test standard (ASTM D790-10A). Based on the coupled hygro-mechanical finite element (FE) analysis method, an inverse...

Determination of the intrinsic α/γ interface mobility during massive transformations in interstitial free Fe-X alloys

Kinetics of the austenite (γ) to ferrite (α) transformation and the reverse ferrite (α) to austenite (γ) transformation in a series of Fe-X (X = Ni, Mn and Co) binary alloys has been experimentally and theoretically investigated. A transition from partitioning to partitionless transformation has been predicted to occur during both the γ→α and...