Pages
- 1
- 2
- document
-
Zhang, Liang (author), Li, Guang (author), Chen, Huang (author), Tang, Jingtian (author), Yang, Guanci (author), Yu, Mingbiao (author), Hu, Yong (author), Xu, Jun (author), Sun, J. (author)Audio magnetotelluric (AMT) is commonly used in mineral resource exploration. However, the weak energy of AMT signals makes them susceptible to being overwhelmed by noise, leading to erroneous geophysical interpretations. In recent years, deep learning has been applied to AMT denoising and has shown better denoising performance compared to...journal article 2024
- document
-
Yu, Hao (author), Fu, Jiabo (author), Wang, Chenchong (author), Chen, Yinping (author), Wang, Lingyu (author), Fang, Haixing (author), Li, Jinguo (author), van der Zwaag, S. (author), Xu, Wei (author)To achieve an effective design of additively manufacturable Ni superalloys with decent service performance, a hybrid computational design model has been developed, where the strategy to tailor local elemental segregations was integrated within a scheme of minimizing the cracking susceptibility. More specifically, the phase boundary of primary...journal article 2024
- document
- Li, Qiang (author), Li, Gaofeng (author), Yu, Chuang (author), Luo, Shan (author), Ding, J. (author) contribution to periodical 2024
- document
-
Yu, Fuyang (author), Wang, Zhen (author), Li, Dongyuan (author), Zhu, P. (author), Liang, Xiaohui (author), Wang, Xiaochuan (author), Okumura, Manabu (author)Cross-modal retrieval, as an important emerging foundational information retrieval task, benefits from recent advances in multimodal technologies. However, current cross-modal retrieval methods mainly focus on the interaction between textual information and 2D images, lacking research on 3D data, especially point clouds at scene level,...conference paper 2024
- document
-
Chen, Y. (author), de Lima, Luiz Miranda (author), Li, Zhenming (author), Ma, Bin (author), Lothenbach, Barbara (author), Yin, Suhong (author), Yu, Qijun (author), Ye, G. (author)The synthesis of N-A-S-H gel with high Si/Al ratios (>2) has been rarely reported in the literature, leaving the establishment of a reliable synthesis route as an open challenge. This paper aims to synthesize N-A-S-H gels with Si/Al ratios ranging from 1 to 3 and establish their thermodynamic database. The effects of reaction temperature,...journal article 2024
- document
-
Yu, Ying-Ying (author), Li, Xin (author), Ji, Y. (author)Cubic Bézier curves are widely used in computer graphics and geometric modeling, favored for their intuitive design and ease of implementation. However, self-intersections within these curves can pose significant challenges in both geometric modeling and analysis. This paper presents a comprehensive approach to detecting and computing self...journal article 2024
- document
-
Yu, G. (author), Tang, J. (author), Li, L. (author), Rossen, W.R. (author)The main objective of this study is to understand the vertical sweep efficiency with miscible CO2-water-coinjection as a secondary recovery method, from multiple perspectives: phase behavior, total relative mobility, fluid densities/viscosities, the driving forces and consequent phase distributions etc. We also seek to provide insights into...conference paper 2023
- document
-
Wen, Weijie (author), Lyu, Rui (author), Li, Botong (author), Cao, Hong (author), Yu, Jiali (author), Li, Bin (author), Popov, M. (author)For the black start-up of DC micro-grids, three-phase charging resistors are required to limit the uncontrollable surge current. The main drawback of this start-up method is the difficulty in determining the appropriate resistance value to achieve a rapid start-up and limit the surge current with the change of grid parameters. To address this...journal article 2023
- document
-
Cong, Yangfan (author), Yu, Suihuai (author), Chu, Jianjie (author), Su, Zhaojing (author), Huang, Y. (author), Li, Feilong (author)Eliciting user needs from mass online reviews is playing a significant role in the product iteration process. Efficient user needs elicitation does achieve considerable benefits for maintaining higher competitiveness and a speedier lifecycle. However, there is inevitably an online review scarcity about new products due to the short time on...journal article 2023
- document
-
Zhu, Yifan (author), Lu, Huimin (author), Wang, Jianping (author), Yu, Tongjun (author), Li, Z.Z.L. (author), Tian, Yucheng (author)In order to improve the light extraction of AlGaN-based short wavelength ultraviolet light emitting diodes (DUC-LEDs), a type of microstructure with high aspect ratio is introduced and optimized on the AlN substrate surface. And, particle swarm optimization (PSO) algorithm is used to inverse design of the surface microstructure to maximize...journal article 2023
- document
-
Liu, Huanhuan (author), Wang, R. (author), Gao, Haiyan (author), Chen, Lijuan (author), Li, Xiaochen (author), Yu, Xuan (author), Wu, Yaping (author), Bai, Yan (author), Wei, W. (author), Wang, Meiyun (author)The development of clinical imaging techniques significantly improves diagnostic accuracy and provides guidance for personalized treatment of individuals. However, every single imaging modality has its distinct drawbacks that cannot fully fulfil the diagnosis requirement. Thus, rational combination of different imaging modalities can achieve...review 2023
- document
-
Li, Yangzhi (author), Hu, Yusong (author), Tan, T. (author), Yu, Boyuan (author), Li, Jingwei (author), Fingrut, Adam (author)The prevailing issue of low housing supply is caused in part by a lack of skilled construction workers. If unskilled residents were adequately equipped, they could potentially address this issue, expanding and adapting their homes without professional builders and designers. This research proposes the use of discrete components to build on...conference paper 2023
- document
-
Li, Jiayu (author), Xu, Yunbo (author), Jing, Yi (author), Gao, Yijing (author), Liu, Hongliang (author), Yu, Yongmei (author), Banis, Alexandros (author), Kestens, L.A.I. (author), Petrov, R.H. (author)The phase transformations, microstructure and properties of two Medium-Mn processed via quenching and partitioning steels were compared in this contribution and a new strategy for controlling mechanical properties by introducing and controlling cold-worked ferrite prior to heat treatment is proposed. It was found that during heating, the...journal article 2023
- document
-
Wang, L. (author), Li, Erlei (author), Zhou, Zongyan (author), Zhang, Baicheng (author), Yu, Aibing (author)Powder bed fusion additive manufacturing has been applied to the fabrication of functionally graded materials. A new design that allows the material composition to change along the direction perpendicular to the powder spreading has been reported in the literature. Based on this design, this work examines the quality of the graded spread...journal article 2023
- document
-
Li, Lingjie (author), Yu, Wenjian (author), Batselier, K. (author)In recent years, the application of tensors has become more widespread in fields that involve data analytics and numerical computation. Due to the explosive growth of data, low-rank tensor decompositions have become a powerful tool to harness the notorious curse of dimensionality. The main forms of tensor decomposition include CP...journal article 2022
- document
-
Zhao, Pengjun (author), Zeng, Liangen (author), Li, Peilin (author), Lu, Haiyan (author), Hu, Haoyu (author), Li, Chengming (author), Zheng, Mengyuan (author), Li, Haitao (author), Yu, Zhao (author), Qi, Y. (author)The threat of global climate change has caused the international community to pay close attention to atmospheric levels of greenhouse gases such as carbon dioxide. Transportation sector carbon dioxide emissions efficiency (TSCDEE) is a key indicator used to prioritize sustainable development in the transportation sector. In this paper, the...journal article 2022
- document
-
Tian, Zhan (author), Yu, Ziwei (author), Li, Yifan (author), Ke, Q. (author), Liu, Junguo (author), Luo, Hongyan (author), Tang, Yingdong (author)Climate change and rapid urbanization have made it difficult to predict the risk of pollution in cities under different types of rainfall. In this study, a data-driven approach to quantify the effects of rainfall characteristics on river pollution was proposed and applied in a case study of Shiyan River, Shenzhen, China. The results indicate...journal article 2022
- document
-
Yu, M. (author), Liu, X. (author), Wood, Paul (author), Wei, Li (author), Wang, Guoqing (author), Zhang, Jianyun (author), Li, Qiongfang (author)Due to an intensification of anthropogenic activities and climate change in recent decades, the hydrological connections and relationships between rivers and lakes have been significantly modified globally. Poyang Lake is one of the largest freshwater lakes globally and is one of the few that remain naturally connected to the Yangtze River....journal article 2022
- document
-
Chen, Y. (author), Dolado, Jorge S. (author), Li, Z. (author), Yin, Suhong (author), Yu, Qijun (author), Kostiuchenko, A. (author), Ye, G. (author)In this paper, the atomic structures of sodium aluminosilicate hydrate (N–A–S–H) gels with different Si/Al ratios are studied by molecular dynamics simulation. An N–A–S–H gel model was obtained from the polymerization of Si(OH)<sub>4</sub> and Al(OH)<sub>3</sub> monomers with the use of a reactive force field (ReaxFF). The simulated atomic...journal article 2022
- document
-
Chen, Yun (author), Dolado, Jorge S. (author), Yin, Suhong (author), Yu, Qijun (author), Kostiuchenko, Albina (author), Li, Zhenming (author), Ye, Guang (author)The understanding of sodium aluminosilicate hydrate (N-A-S-H) gel is still limited due to its complex and amorphous structure. Recently, molecular dynamics simulation has provided a unique opportunity to better understand the structure of N-A-S-H gel from nanoscale. In this work, the N-A-S-H gel structure was obtained by simulating the...conference paper 2021
Pages
- 1
- 2