- document
-
de Winter, Jikke (author), Manzaneque Garcia, T. (author), Ghatkesar, M.K. (author)The emerging high-resolution 3D printing technique called two-photon polymerization (2PP) enables to print devices bottom-up rapidly, contrary to the top-down lithography-based fabrication methods. In this work, various polymer microbeams are 3D printed and their resonant characteristics are analyzed to understand the origin of damping. The...journal article 2024
- document
-
Luomaranta, Toni (author), Martinsuo, Miia (author), Ortt, J.R. (author)Technological innovations are becoming increasingly systemic in the complex and interconnected world. The initiation and evolution of systemic innovations take time and include numerous challenges, and the mechanisms through which systemic innovations emerge in the interaction between different technologies represent a research gap. This...journal article 2024
- document
-
Hedayati, R. (author), Lakshmanan, Sandhya P. (author)The aim of the present work is to design active acoustic metamaterial consisting of an array of Helmholtz resonators and fabricating them using an additive manufacturing technique in order to assist in a reduction in noise levels in aerospace applications. To this aim, initially, a passive metamaterial consisting of an array of 64 Helmholtz...journal article 2024
- document
-
Hargrove, Brianne (author), Frecker, Mary (author), Nastevska, Angela (author), Jovanova, J. (author)While nonlinear-elastic materials demonstrate potential in enhancing the performance of compliant mechanisms, their behavior still needs to be captured in a generalized mechanical model. To inform new designs and functionality of compliant mechanisms, a better understanding of nonlinear-elastic materials is necessary and, in particular, their...journal article 2024
- document
-
Hehenberger, S.P. (author), Caizzone, Stefano (author), Yarovoy, Alexander (author)The utilization of low-cost hybrid additive manufacturing equipment for creating a fully integrated patch antenna system is demonstrated. A miniaturized stacked dual-band patch antenna for GNSS applications with integrated feed, amplifier, matching, and bias network is considered. Design and manufacturing challenges due to the peculiarities of...conference paper 2024
- document
-
Xiao, Y. (author)Additively manufacturing can bring opportunities and risk factors to the aerospace industry. On one hand, additive manufacturing allows the manufacturing of structures with geometries that are difficult or impossible to fabricatewith conventional machining procedures. This geometry flexibility may lead to components with a greater strength-to...doctoral thesis 2023
- document
-
Zhu, Jia-Ning (author)Shape memory alloys (SMAs), such as nickel-titanium (NiTi) alloys or Nitinol, possess remarkable properties, including superelasticity and shape memory effects, which are attributed to the reversible martensitic transformation. However, traditional manufacturing of NiTi SMAs is challenging due to its high ductility and reactivity, which limits...doctoral thesis 2023
- document
-
Mishra, V. (author)The world has seen industrial revolutions with advancements in manufacturing technologies. The advancements in Additive Manufacturing (AM) technologies will bring another revolution sooner rather than later. Nowadays, the Wire and Arc Additive Manufacturing (WAAM) process is already used to manufacture large-scale structures such as ship...doctoral thesis 2023
- document
-
Dong, J. (author)The treatment of largy bone defect remains challenging in clinics. All the clinically available bone grafts have their own limitations and are not ideal for the treatment. Therefore, developing a new generation of suitable bone substitutes is urgently needed. In the recent years, porous magnesium (Mg) has been extensively studied for orthopedic...doctoral thesis 2023
- document
-
Lussenburg, K.M. (author), Scali, Marta (author), Stolk, Maarten (author), Robijns, D. (author), Sakes, A. (author), Breedveld, P. (author)A vitrectome is a commonly used instrument in eye surgery, which is used to cut and aspirate the vitreous body out of the eye. The mechanism of the vitrectome consists of miniature components that need to be assembled by hand due to their size. Non-assembly 3D printing, in which fully functional mechanisms can be produced in a single production...journal article 2023
- document
-
Mohandas, N.K. (author), Giorgini, Alex (author), Vanazzi, Matteo (author), Riemslag, A.C. (author), Scott, S.P. (author), Popovich, V. (author)This study investigated the in-situ gaseous (under 150 bar) hydrogen embrittlement behaviour of additively manufactured (AM) Inconel 718 produced from sustainable feedstock. Here, sustainable feedstock refers to the Inconel 718 powder produced by vacuum induction melting inert gas atomisation of failed printed parts or waste from CNC machining....journal article 2023
- document
-
Hehenberger, S.P. (author), Caizzone, Stefano (author), Yarovoy, Alexander (author)The utilization of additive manufacturing (AM) to engineer the permittivity profile of dielectric resonator antennas (DRAs) is considered. For the first time, the capabilities of AM are exploited to create continuously swept permittivity profiles and applied to cylindrical DRAs. The spatial variant lattices (SVL) synthesis algorithm is...journal article 2023
- document
-
Deep Learning for Size-Agnostic Inverse Design of Random-Network 3D Printed Mechanical MetamaterialsPahlavani, H. (author), Tsifoutis-Kazolis, Kostas (author), Cruz Saldivar, M. (author), Mody, Prerak (author), Zhou, J. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)Practical applications of mechanical metamaterials often involve solving inverse problems aimed at finding microarchitectures that give rise to certain properties. The limited resolution of additive manufacturing techniques often requires solving such inverse problems for specific specimen sizes. Moreover, the candidate microarchitectures...journal article 2023
- document
-
van Hengel, I.A.J. (author), van Dijk, B. (author), Modaresifar, K. (author), Hooning van Duyvenbode, J. Fred F. (author), Nurmohamed, F. Ruben H.A. (author), Leeflang, M.A. (author), Fluit, A.C. (author), Fratila-Apachitei, E.L. (author), Apachitei, I. (author), Weinans, Harrie (author), Zadpoor, A.A. (author)Additively manufactured (AM) porous titanium implants may have an increased risk of implant-associated infection (IAI) due to their huge internal surfaces. However, the same surface, when biofunctionalized, can be used to prevent IAI. Here, we used a rat implant infection model to evaluate the biocompatibility and infection prevention...journal article 2023
- document
-
Pitta Kruize, Carlos (author), Panahkhahi, S. (author), Putra, N.E. (author), Diaz Payno, P.J. (author), van Osch, G.J.V.M. (author), Zadpoor, A.A. (author), Mirzaali, Mohammad J. (author)Bone-to-soft tissue interfaces are responsible for transferring loads between tissues with significantly dissimilar material properties. The examples of connective soft tissues are ligaments, tendons, and cartilages. Such natural tissue interfaces have unique microstructural properties and characteristics which avoid the abrupt transitions...review 2023
- document
-
van Oudheusden, A.A. (author), Buijserd, A.J. (author), Doubrovski, E.L. (author), Flipsen, Bas (author), Faludi, Jeremy (author), Balkenende, R. (author)Spare parts availability is crucial for extending the life of consumer products. However, long-term availability could lead to high stocks of spare parts, which might not be used. Instead, on-demand manufacturing of spare parts with additive manufacturing (AM) is a promising alternative. This paper presents a method to evaluate parts on their...conference paper 2023
- document
-
Hehenberger, S.P. (author), Caizzone, Stefano (author), Thurner, Stefan (author), Yarovoy, Alexander (author)Additive manufactured structured dielectrics with engineered permittivity tensors are promising tools for novel microwave components and are drawing increasing attention from researchers. However, design modeling and experimental verification of anisotropic materials are challenging and have not yet been thoroughly explored in the literature. In...conference paper 2023
- document
-
Yarali, E. (author), Zadpoor, A.A. (author), Staufer, U. (author), Accardo, A. (author), Mirzaali, Mohammad J. (author)Mechanical and morphological design parameters, such as stiffness or porosity, play important roles in creating orthopedic implants and bone substitutes. However, we have only a limited understanding of how the microarchitecture of porous scaffolds contributes to bone regeneration. Meta-biomaterials are increasingly used to precisely engineer...review 2023
- document
-
Putra, N.E. (author), Zhou, J. (author), Zadpoor, A.A. (author)The need for sustainable development has never been more urgent, as the world continues to struggle with environmental challenges, such as climate change, pollution, and dwindling natural resources. The use of renewable and recycled waste materials as a source of raw materials for biomaterials and tissue engineering is a promising avenue for...review 2023
- document
-
Hedayati, R. (author), Stulova, Victoria (author)Due to payload weight limitations and human vulnerability to harsh space conditions, it is preferable that the potential landing location for humans has an already constructed habitat preferably made from in situ materials. Therefore, the prospect of utilizing a readily available Martian material, such as regolith, in an easily programmable...journal article 2023