Pressure-assisted CU sintering for SiC Die-attachment application

Distribution of porosity surrounding a microfiber in cement paste

This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a...

Microstructural and micromechanical characterization of sintered nano-copper bump for flip-chip heterogeneous integration

Copper nanoparticles (CuNPs) sintering for flip-chip interconnects is a promising solution for 3D and heterogeneous integration to overcome the limitation of solder materials. To this end, we perform the photolithographic stencil printing method to pattern CuNPs, and the form of flip-chip interconnects is completed after CuNPs sintering...

Nanoindentation characterization of sintered porous Cu nanoparticles used in power electronics packaging – A molecular dynamic simulation study

As a critical part of speeding up industrial electrification, power electronics, and its packaging technology are undergoing rapid development. Cu nanoparticle sintering technology has therefore received extensive attention for its excellent performance in the die-attachment layer, where the mechanical properties are essential to be known for...

Nanomechanical Characteristics of Interfacial Transition Zone in Nano-Engineered Concrete

This study investigates the effects of nanofillers on the interfacial transition zone (ITZ) between aggregate and cement paste by using nanoindentation and statistical nanoindentation techniques. Moreover, the underlying mechanisms are revealed through micromechanical modeling. The nanoindentation results indicate that incorporating...

High-temperature nanoindentation characterization of sintered nano-copper particles used in high power electronics packaging

Nano-copper sintering is one of new die-attachment and interconnection solutions to realize the wide bandgap semiconductor power electronics packaging with benefits on high temperature, low inductance, low thermal resistance and low cost. Aiming to assess the high-temperature reliability of sintered nano-copper die-attachment and...

Innovative low-melting glass compositions containing fly ash and blast furnace slag

The investigation of new glass compositions is crucial to expand the possible applications of glass, from the typical applications for building engineering, in the form of cast blocks or floated glass, to more advanced technologies, such as 3D-printed glass or glass to metal connections. Despite the intense research activity and new glass...

Influence of SiO₂, TiO₂ and Fe₂O₃ nanoparticles on the properties of fly ash blended cement mortars

This study explores the effects of different types of nanoparticles, namely nano-SiO₂ (NS), nano-TiO₂ (NT), and nano-Fe₂O₃ (NF) on the fresh properties, mechanical properties, and microstructure of cement mortar containing fly ash as a supplementary cementitious material. These nanoparticles existed...

Mediation of high temperature radiation damage in bcc iron by Au or Cu precipitation

High temperature radiation damage in binary bcc Fe alloys containing 1 atomic % Au or Cu due to Fe ion irradiation at 550 °C to a peak dose of 2.8 and 8.3 dpa is studied. The precipitation behavior of gold and copper and its correlation to the irradiation-induced defects is studied by transmission electron microscopy and variable energy...

Micromechanical testing and modelling of blast furnace slag cement pastes

This work aims to understand deformation and fracture processes in blast furnace slag cement pastes made using CEM III/B which is commonly used in the Dutch infrastructure sector. First, based on our previous work on Portland cement pastes, a micromechanical model utilizing nanoindentation and X-ray computed tomography (CT) for input is...

Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties

A novel quenching and partitioning process (Q&P) including the hot stamping (HS) process was studied, using two stamping temperatures (750 °C and 800 °C) and two quenching temperatures (318 °C and 328 °C). This combination is here called Hot Stamping and Quenching and Partitioning process (HSQ&P). The partitioning step was performed...

Chemo-physico-mechanical properties of the interface zone between bacterial PLA self-healing capsules and cement paste

In this study, the interface between different types of bacteria-embedded self-healing polylactic acid capsules (PLA) and cement paste is investigated. Particularly, the changes in microstructure and mechanical properties of the interface with respect to bulk cement paste were studied. First, nanoindentation was performed to obtain maps of...

Study of nano-mechanical performance of pretreated natural fiber in ldpe composite for packaging applications

In this work, the effects of chemical pretreatment and different fiber loadings on mechanical properties of the composites at the sub-micron scale were studied through nanoindentation. The composites were prepared by incorporating choline chloride (ChCl) pretreated rice husk waste (RHW) in low-density polyethylene (LDPE) using melt processing...

Investigation of Pressure Assisted Nanosilver Sintering Process for Application in Power Electronics

High power electronics with wide band gap semiconductors are becoming the most promising devices in new energy power suppliers and converters. Highly reliable die attach materials, serving as one of interconnections, play critical roles in power electronic packages and modules. Among which, the nanosilver paste/film has become a promising die...

Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes

The aim of this paper was to investigate the effect of natural carbonation on the pore structure, and elastic modulus (E_m) of alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) pastes after one year of exposure in the natural laboratory conditions. The chemical changes due to carbonation were examined by...

Influence of microencapsulated phase change material (PCM) addition on (micro) mechanical properties of cement paste

Excessive cracking can be a serious durability problem for reinforced concrete structures. In recent years, addition of microencapsulated phase change materials (PCMs) to concrete has been proposed as a possible solution to crack formation related to temperature gradients. However, the addition of PCM microcapsules to cementitious materials...

Influence of interface and strain hardening cementitious composite (SHCC) properties on the performance of concrete repairs

In the construction industry the demand for repair and maintenance of concrete structures constantly increases. Still, the performance of current concrete repairs is not satisfactory and there is an urgent need for improvement. Understanding the damage development in a repair system, and how to predict, model and prevent its failure is critical...

Micromechanical properties of a new polymeric microcapsule for self-healing cementitious materials

Self-healing cementitious materials containing a microencapsulated healing agent are appealing due to their great application potential in improving the serviceability and durability of concrete structures. In this study, poly(phenol-formaldehyde) (PF) microcapsules that aim to provide a self-healing function for cementitious materials were...