Searched for: +
(1 - 20 of 29)

Pages

document
Li, F. (author), Wang, L.L. (author), Yuan, S.J. (author), Wang, X.S. (author)
In the present research, the relationship between the strain increment and Lode parameter was obtained by using Lode parameter and Levy-Mises equation. The quantitative relation between different strain increments was presented and the relationship between plastic deformation types and Lode parameter was demonstrated. The relations between...
journal article 2009
document
Li, L. (author), Li, Z. (author), Yuan, H. (author), Wang, L. (author), Yanqing, H. (author)
The combination of multiple global navigation satellite systems (GNSSs) is able to improve the accuracy and reliability, which is beneficial for navigation in safety–critical applications. Due to the relatively low accuracy of pseudorange observations, the single-epoch GNSS real-time kinematic (RTK) using phase observations can be utilized to...
journal article 2015
document
Wang, Y. (author), Wang, Jie (author), Yuan, Z. (author), Han, Haoya (author), Li, Tao (author), Li, Li (author), Guo, Xuhong (author)
Chitosan has been used to cross-link poly(acrylic acid) to give three pH-sensitive hydrogels designed to control the release of the drugs amoxicillin and meloxicam. The extent of cross-linking and solution pH was found to dominate the swelling behavior of these hydrogels as shown by scanning electron microscopy and swelling time dependencies....
journal article 2017
document
Xiahou, Xiaer (author), Yuan, Jingfeng (author), Liu, Y. (author), Tang, Yuchun (author), Li, Qiming (author)
Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a...
journal article 2018
document
Zhang, Baocheng (author), Teunissen, P.J.G. (author), Yuan, Yunbin (author), Zhang, Hongxing (author), Li, Min (author)
Vertical total electron content (VTEC) parameters estimated using global navigation satellite system (GNSS) data are of great interest for ionosphere sensing. Satellite differential code biases (SDCBs) account for one source of error which, if left uncorrected, can deteriorate performance of positioning, timing and other applications. The...
journal article 2018
document
Zhang, Baocheng (author), Teunissen, P.J.G. (author), Yuan, Yunbin (author), Zhang, Xiao (author), Li, Min (author)
Sensing the ionosphere with the global positioning system involves two sequential tasks, namely the ionospheric observable retrieval and the ionospheric parameter estimation. A prominent source of error has long been identified as short-term variability in receiver differential code bias (rDCB). We modify the carrier-to-code leveling (CCL), a...
journal article 2018
document
Yuan, Ye (author), Tang, Xiuchuan (author), Zhou, Wei (author), Pan, W. (author), Li, Xiuting (author), Zhang, Hai Tao (author), Ding, Han (author), Goncalves, Jorge (author)
Cyber-physical systems embed software into the physical world. They appear in a wide range of applications such as smart grids, robotics, and intelligent manufacturing. Cyber-physical systems have proved resistant to modeling due to their intrinsic complexity arising from the combination of physical and cyber components and the interaction...
journal article 2019
document
Li, Bo (author), Zhang, Shizhe (author), Li, Qiu (author), Li, Neng (author), Yuan, Bo (author), Chen, Wei (author), Brouwers, H.J.H. (author), Yu, Qingliang (author)
The uptake mechanism of heavy metal ions in layered double hydroxides (LDHs) is investigated in this paper via solid-solution exchange experiments and first principle study. The uptake capacities of C-LDHs for heavy metal ions from solutions are experimentally investigated and the structures of LDHs doped with various heavy metal ions are...
journal article 2019
document
Yuan, Zhenyu (author), Wang, Jie (author), Wang, Y. (author), Liu, Q. (author), Zhong, Yujie (author), Wang, Yu (author), Li, Li (author), Lincoln, Stephen F. (author), Guo, Xuhong (author)
A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and...
journal article 2019
document
Wang, K. (author), Li, Jiayuan (author), Yan, Xinping (author), Huang, Lianzhong (author), Jiang, X. (author), Yuan, Yupeng (author), Ma, Ranqi (author), Negenborn, R.R. (author)
The optimization of ship energy consumption is attracting a great deal of attention, as societies seek to save energy and reduce emissions. Shipping companies are more concerned with the energy consumption of a ship fleet, as opposed to that of a single ship. Because the energy consumption of a fleet is influenced by multiple factors...
journal article 2020
document
Wang, K. (author), Li, Jiayuan (author), Huang, Lianzhong (author), Ma, Ranqi (author), Jiang, X. (author), Yuan, Yupeng (author), Mwero, Ngome A. (author), Negenborn, R.R. (author), Sun, Peiting (author), Yan, Xinping (author)
Energy saving and emission reduction have attracted a great deal of attention in the maritime industry. The optimization of a ship's energy efficiency can reduce energy consumption and CO<sub>2</sub> emissions effectively. However, most of the available studies only focus on either the sailing speed or route optimization, and the interaction...
journal article 2020
document
Li, Chao Chieh (author), Yuan, Min Shueh (author), Liao, Chia Chun (author), Chang, Chih Hsien (author), Lin, Yu Tso (author), Tsai, Tsung Hsien (author), Huang, Tien Chien (author), Liao, Hsien Yuan (author), Staszewski, R.B. (author)
In this article, we introduce a fractional-N all-digital phase-locked loop (ADPLL) architecture based on a single LC-tank, featuring an ultra-wide tuning range (TR) and optimized for ultra-low area in 10-nm FinFET CMOS. Underpinned by excellent switches in the FinFET technology, a high turn-on/off capacitance ratio of LC-tank switched...
journal article 2021
document
Wang, Kai (author), Xu, Hao (author), Li, Jiayuan (author), Huang, Lianzhong (author), Ma, Ranqi (author), Jiang, X. (author), Yuan, Yupeng (author), Mwero, Ngome A. (author), Sun, Peiting (author), Negenborn, R.R. (author), Yan, Xinping (author)
It is of significant importance to optimize the energy consumption of ships in order to improve economy and reduce CO<sub>2</sub> emissions. However, the energy use of ships is affected by a series of navigational environmental parameters, which have certain spatial and temporal differences and variability. Therefore, the dynamic...
journal article 2021
document
Yuan, Bo (author), Li, G. (author), Guo, Mingxing (author), Zhuang, Linzhong (author)
Synergy of Ni micro-alloying and thermomechanical processing on the phase distribution, formability and bendability of Al–Mg–Si–Cu–Zn–Fe–Mn alloys was systematically studied in this paper. With the addition of micro-alloying Ni, the Ni-containing Fe-rich phase can be formed, which not only serves as nucleation sites of Mg–Si precipitates ...
journal article 2021
document
Yuan, Bo (author), Li, G. (author), Guo, Mingxing (author), Zhuang, Linzhong (author)
The coupling control of quenching rate and pre-aging and its positive effect on the age-hardening response of Al–Mg–Si–Cu–Zn–Fe–Mn alloy was systematically investigated. The larger and more stable solute clusters can be formed in alloy with fast age-hardening response by using the lower quenching rate (5.3 °C/min) and an appropriate pre-aging...
journal article 2021
document
Wang, Jue (author), Yuan, Weiyi (author), Li, Z. (author), Zhu, Yingcan (author), Santos, Thebano (author), Fan, J. (author)
This paper presents a convenient and efficient method to predict the mechanical solutions of a laminated Liquid Crystal Elastomers (LCEs) system subjected to combined thermo-mechanical load, based on a back propagation (BP) neural network which is trained by machine learning from a database established by analytical solutions. Firstly, the...
journal article 2022
document
Wang, Jue (author), Yuan, Weiyi (author), Li, Z. (author), Trofimov, Yuri (author), Lishik, Sergey (author), Fan, J. (author)
Some atrial contractile assist devices applied on the heart surface can be regarded as a laminated Liquid crystal elastomer (LCE) plate under steady temperature loads and a contact mechanical force. An exact solution for the deformation of the laminated LCE plate under combined thermal and mechanical loads is derived by solving the three...
journal article 2022
document
Lin, Chaoning (author), Li, Tongchun (author), Chen, Siyu (author), Yuan, Li (author), van Gelder, P.H.A.J.M. (author), Yorke-Smith, N. (author)
Dam safety monitoring has become an important topic and is critical for evaluating a dam's safety status. This study focuses on identifying the mechanical properties of a concrete dam from long-term viscoelastic deformation monitoring data. A novel inversion framework is proposed in which a surrogate model, instead of the finite element model,...
journal article 2022
document
Guo, R. (author), Yuan, Peng (author), Han, Xiying (author), He, Xuexia (author), Lu, Jiangbo (author), Li, Qi (author), Dang, Liqin (author), Sun, Jie (author), Liu, Zonghuai (author), Lei, Zhibin (author)
The Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> film with metallic conductivity and high pseudo-capacitance holds profound promise in flexible high-rate supercapacitors. However, the restacking of Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sheets hinders ion access to thick film electrodes. Herein, a mild yet green route has been developed to...
journal article 2022
document
Wang, Xia (author), Yuan, Jiachen (author), You, K. (author), Ma, Xianrui (author), Li, Zhaoji (author)
The International Energy Agency (IEA) emphasizes that using real building energy use data (RBEUD) to reflect the actual condition of buildings and inform policy-making is the most effective way to reduce buildings’ carbon emissions. However, based on IEA’s evaluation, regional and national building stock data are limited and lacking. Especially...
journal article 2023
Searched for: +
(1 - 20 of 29)

Pages