Effect of metakaolin on the autogenous shrinkage of alkali-activated slag-fly ash paste

The high autogenous shrinkage of alkali-activated materials made from slag and fly ash is recognised as a major drawback with regard to the use as construction materials. In this study, metakaolin was introduced into the alkali-activated slag-fly ash (AASF) paste to mitigate the autogenous shrinkage. The shrinkage mitigation mechanism of...

RILEM TC 247-DTA round robin test: carbonation and chloride penetration testing of alkali-activated concretes

Many standardised durability testing methods have been developed for Portland cement-based concretes, but require validation to determine whether they are also applicable to alkali-activated materials. To address this question, RILEM TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ carried out round robin testing of carbonation...

A low-autogenous-shrinkage alkali-activated slag and fly ash concrete

Alkali-activated slag and fly ash (AASF) materials are emerging as promising alternatives to conventional Portland cement. Despite the superior mechanical properties of AASF materials, they are known to show large autogenous shrinkage, which hinders the wide application of these eco-friendly materials in infrastructure. To mitigate the...

Mitigating the autogenous shrinkage of alkali-activated slag by metakaolin

This study investigates the effectiveness of metakaolin (MK)in mitigating the autogenous shrinkage of alkali-activated slag (AAS). It is found that the autogenous shrinkage of AAS paste can be reduced by 40% and 50% when replacing 10% and 20% slag with MK, respectively. By providing additional Si and Al, and decreasing the pH of the pore...

Chemical deformation of metakaolin based geopolymer

Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....

RILEM TC 247-DTA round robin test: mix design and reproducibility of compressive strength of alkali-activated concretes

The aim of RILEM TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ is to identify and validate methodologies for testing the durability of alkali-activated concretes. To underpin the durability testing work of this committee, five alkali-activated concrete mixes were developed based on blast furnace slag, fly ash, and flash-calcined...