Investigation on the effect of interface properties on compressive failure behavior of 3D woven composites through micromechanics-based multiscale damage model

In this paper, the effect of interface properties on the compressive failure behavior of 3D woven composites (3DWC) is investigated by incorporating a micromechanics-based multiscale damage model (MMDM). The correlation between the mesoscopic stress of yarns and microscopic stress of constituents is established by defining a stress...

A micro graphene high temperature sensor with a single Si₃N₄ protective layer

Temperature sensors are widely used in industrial production, national defense and military fields. The traditional temperature sensors normally operate in a limited temperature range no more than 200 °C, which cannot be used for extreme high temperature detections. In this paper, a thermal protection method for the sensing graphene membrane...

The Covariation of Color and Orange Fluorescence Instabilities in Yellow Sapphires

In recent years, some sapphires were found to fade in sunlight and to increase their color after UV irradiation. This unstable color phenomenon is attributed to the photochromism of corundum. The photochromic effect seriously affects the grading and evaluation of sapphires, although its mechanism is still uncertain. Here, we performed a set...

Elevated physical weathering exceeds chemical weathering of clays during the Paleocene-Eocene Thermal Maximum in the continental Bighorn Basin (Wyoming, USA)

The Paleocene-Eocene Thermal Maximum (PETM) global warming event at ∼56 million years before present changed catchment weathering and erosion. Increased chemical weathering of silicate minerals is thought to be an important process removing CO₂ from the atmosphere. However, changes in clay mineralogy can often be explained by...

A Novel High-temperature Pressure Sensor Based on Graphene Coated by Si3N4

The high-temperature pressure sensors have wide applications in aerospace, petroleum, geothermal exploration, automotive electronics, and other fields. However, the traditional silicon-based pressure sensors are restricted to pressure measurement under 120~{\circ }\text{C} and cannot be satisfied to measure the pressure of various gases or...

Ultimate soil resistance of the laterally loaded pile in uniform sand

Piles have been widely used as foundations to resist lateral loads. For the design of a laterally loaded pile, one of the most important inputs is the ultimate soil resistance (p_ult = K_ultDσv^′,whereKult is the ultimate lateral soil resistance coefficient, D is the pile diameter, and σv^′ is the...

Lateral behavior of monopiles in sand under monotonic loading: Insights and a new simple design model

This paper presents a synthesis of recent and new research conducted by the authors on laterally loaded monopiles in drained sand. The research involved reduced-scale field tests, centrifuge model tests, finite element (FE) simulations and comparisons of design approaches with published experimental data. The influence of the monopile base on...

A simple rotational spring model for laterally loaded rigid piles in sand

Monopiles are the most popular foundation for offshore wind turbines. These foundations typically have a low length to diameter ratio and undergo a rigid body rotation when subjected to lateral load. This paper presents results from an extensive numerical investigation involving 3D finite element analyses to demonstrate that the lateral...

Study on the aging resistance of polyurethane precursor modified bitumen and its mechanism

As an environmentally friendly alternative for the production of high-performance modified asphalt by chemical reactions, a liquid-state polyurethane-precursor-based reactive modifier (PRM) was developed and employed in the asphalt modification. In contrast to the traditional solid bitumen modifier, for example, rubber and thermoplastic...

Influence of Pile Diameter and Aspect Ratio on the Lateral Response of Monopiles in Sand with Different Relative Densities

The large-diameter monopiles are the most preferred foundation used in offshore wind farms. However, the influence of pile diameter and aspect ratio on the lateral bearing behavior of monopiles in sand with different relative densities has not been systematically studied. This study presents a series of well-calibrated finite-element (FE)...

Acoustic emission-based damage characterization of 70 MPa type IV hydrogen composite pressure vessels during hydraulic tests

This paper aims to characterize the damage mechanisms of 70 MPa Type IV hydrogen composite pressure vessels using the acoustic emission (AE) method. First, AE signals were captured during the 0–105 MPa and 0–158 MPa hydraulic tests of two vessels using multi-step loading method. Second, the AE feature parameters in time-domain and frequency...