- document
-
Bufalari, G. (author), den Besten, J.H. (author), Kaminski, M.L. (author)The response of maritime structures can be multiaxial, involving predominant mode-I and non-negligible mode-III components. Adopting a stress distribution formulation based effective notch stress as fatigue strength parameter for mixed mode-{I, III} multiaxial fatigue assessment purposes, a mode-I equivalent von Mises type of failure...journal article 2024
- document
-
Schrijvershof, Pim (author), Rahimi, A. Masie (author), Leone, Nicola (author), Bloemendaal, Alexander (author), Daams, Freek (author), Arezzo, Alberto (author), Mintz, Yoav (author), Horeman, T. (author)Surgeons performing robotic-assisted laparoscopic surgery experience physical stress and overuse of shoulder muscles due to sub-optimal arm support during surgery. The objective is to present a novel design and prototype of a dynamic arm support for robotic laparoscopic surgery to evaluate its ergonomics and performance on the AdLap-VR...journal article 2024
- document
-
Yao, Liaojun (author), Wang, Jiexiong (author), He, Yonglyu (author), Zhao, Xiuhui (author), Chen, Xiangming (author), Liu, J. (author), Guo, Licheng (author), Alderliesten, R.C. (author)Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...journal article 2024
- document
-
Leciñana, I. (author), Renart, J. (author), Carreras, L. (author), Turon, A. (author), Zurbitu, J. (author), Tijs, B.H.A.H. (author)The main objective of this paper is to present a delamination benchmark test concept for composite materials that develop non-self-similar delamination in characterization specimens. The non-self-similar delamination is induced by rotating the loading blocks. The simplicity of the test allows for analyzing the loading mode history by...journal article 2024
- document
-
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...journal article 2024
- document
-
Gomez, A. (author), Banis, A. (author), Avella, M. (author), Molina-Aldareguia, J. M. (author), Petrov, R.H. (author), Dutta, A. (author), Sabirov, I. (author)Numerous studies have demonstrated the viability of lightweight Fe-Mn-Al-C steels for exhibiting an improved balance of high strength and high ductility in automotive applications. However, their high-cycle fatigue behaviour has been scarcely studied. This work examines the effect of κ-carbides formed during the aging treatment on the high...journal article 2024
- document
-
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)Wind turbine blades carry the risk of impact damage during transportation, installation, and operation. Such impacts can cause levels of damage that can propagate throughout the structure compromising performance and safety. In this study, the effect of impact damage on fatigue damage propagation in test specimens representative of a spar cap...journal article 2024
- document
-
Galanopoulos, Georgios (author), Milanoski, Dimitrios (author), Eleftheroglou, N. (author), Broer, Agnes A.R. (author), Zarouchas, D. (author), Loutas, Theodoros (author)An increasing interest for Structural Health Monitoring has emerged in the last decades. Acoustic emission (AE) is one of the most popular and widely studied methodologies employed for monitoring, due to its capabilities of detecting, locating and capturing the evolution of damage. Most literature so far, has employed AE for characterizing...journal article 2023
- document
-
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)The present work aims at understanding the stochastic matrix crack evolution in CFRP cross-ply laminates under tension–tension fatigue loading. An experimental campaign was carried out on twenty-three specimens at different stress levels, while two optical techniques were used for the in-situ monitoring of the accumulation of transverse...journal article 2023
- document
-
Biagini, D. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author)In previous literature, a plateau phase in fatigue growth of impact delamination projected area in CFRP was found. Explaining this plateau phase still represents a knowledge gap. In the present work, echo-pulse and through thickness transmission ultrasonic scan inspections were combined with acoustic emission monitoring to explain this...journal article 2023
- document
-
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)In this paper, a new indicator to localize fatigue damage in a fibre glass composite structure, i.e. spar cap to shear web thick adhesive joint of a wind turbine blade, is presented. This indicator is based on the effect of damping on the phase of the mode shapes of the structure. When fatigue damage occurs, damping increases in the defective...journal article 2023
- document
-
Paz Mendez, J. (author), Raimondo, A. (author), Bisagni, C. (author)This study aims at better understanding the damage tolerance of stiffened composite panels subjected to fatigue loads in the post-buckling regime. Ten single-stringer hat-stiffened specimens with an initial delamination between the skin and the stringer foot were manufactured, and then tested under quasi-static and fatigue loads in post...journal article 2023
- document
-
Hageman, R.B. (author), van der Meulen, F.H. (author), Rouhan, A. (author), Kaminski, M.L. (author)In order to obtain valuable information from an Hull Structure Monitoring system, a large data set and consistent analysis of that data is required. The monitoring requires significant efforts over multiple years and as a result, uncertainties obtained from in-service measurements are rarely published. Instead, researchers have to rely on...journal article 2022
- document
-
Kolken, H.M.A. (author), Garcia, A. Fontecha (author), Plessis, A. Du (author), Meynen, A. (author), Rans, C.D. (author), Scheys, L. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)The fatigue performance of additively manufactured auxetic meta-biomaterials made from commercially pure titanium has been studied only recently. While certain assumptions have been made regarding the mechanisms underlying their fatigue failure, the exact mechanisms are not researched yet. Here, we studied the mechanisms of crack formation...journal article 2022
- document
-
Salvati, Enrico (author), Tognan, Alessandro (author), Laurenti, L. (author), Pelegatti, Marco (author), De Bona, Francesco (author)Defects in additively manufactured materials are one of the leading sources of uncertainty in mechanical fatigue. Fracture mechanics concepts are useful to evaluate their influence, nevertheless, these approaches cannot account for the real morphology of defects. Preliminary attempts to exploit a more comprehensive description of defects can...journal article 2022
- document
-
Trabal, Guillem Gall (author), Bak, Brian Lau Verndal (author), Chen, B. Y. (author), Carreras, Laura (author), Lindgaard, Esben (author)A novel efficient numerical formulation for the analysis of multiple fatigue-driven delamination cracks is presented. A cohesive zone model is used in combination with an Adaptive Refinement Scheme (ARS) and an Adaptive Floating Node Method (A-FNM) element that refine the model effectively during the analysis. Novel techniques are proposed to...journal article 2022
- document
-
Liao, D.L. (author), Zhu, Shun Peng (author), Correia, J.H.G. (author), De Jesus, Abílio M.P. (author), Veljkovic, M. (author), Berto, Filippo (author)Wind, as a sustainable and affordable energy source, represents a strong alternative to traditional energy sources. However, wind power is only one of the options, together with other renewable energy sources. Consequently, the core concerns for wind turbine manufacturers and operators are to increase its reliability and decrease costs,...journal article 2022
- document
-
Kleiberg, T.N.J. (author), Tieleman, Orson (author), Versluis, Marco (author), Kortlever, Wim (author), ten Oever, Erik (author), Hofland, Bas (author)This paper presents a novel design method to predict fatigue of flood gates due to dynamic wave loading. The accumulation of fatigue damage is predicted probabilistically over the entire lifetime of the structure rather than with a set of normative events. Load events are defined using a joint probability distribution of historical wind and...journal article 2022
- document
-
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)Wind turbine blade spar cap to shear web adhesively bonded connections can suffer from damage at the bond-line which can propagate through the structure compromising blade integrity. This study investigates changes in the stiffness and damping of a thick adhesive joint test specimen during a fatigue test. The stiffness is calculated using an...journal article 2022
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Zhang, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)In this study, the flexural strength and fatigue properties of interfacial transition zone (ITZ) were experimentally investigated at the micrometre length scale. The hardened cement paste cantilevers (150 × 150 × 750 μm<sup>3</sup>) attached to a quartzite aggregate surface were prepared and tested under the monotonic and cyclic load using a...journal article 2022