Searched for: +
(1 - 20 of 40)

Pages

List view
Grid view
document
Brewer, G. (author), Gajendran, T. (author)
The collaborative use of Information and Communication Technology (ICT) and Building Information Modelling (BIM) across a temporary project organisation (TPO) may represent the future of construction project delivery through greater design coordination, reduced conflict, efficiency savings, and a valuable information stream for use throughout...
conference paper 2011
document
Hubers, H.C. (author)
Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modelling is a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is...
conference paper 2011
document
Shen, W. (author), Shen, Q. (author)
This paper introduces a BIM based user pre-occupancy evaluation method (UPOEM), which is applied in architectural design stage for the aim to improve the efficiency and effectiveness of the communication between designers and clients. There are constants interactions between the clients’ requirements and designers’ solutions during the early...
conference paper 2011
document
Coenders, J.L. (author)
Interoperability, the ability of different software applications to communicate with each other, is one of the biggest challenges for efficient and effective use of advanced software technology in structural design and engineering. In practice, the problem of interoperability exists very much for the end-user since agreement on common standards...
conference paper 2012
document
Boeykens, S. (author), De Somer, P. (author), Klein, R. (author), Saey, R. (author)
In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by...
conference paper 2013
document
Ebertshäuser, S. (author), Von Both, P. (author)
On behalf of the BBR (German Federal Office for Building and Regional Planning) the development of an Industry Foundation Classes (IFC) based inspection tool was accomplished as application on an underlying work-in-progress development framework. By providing a machine-based checking process the tool ModelCheck was rolled out to meet demands...
conference paper 2013
document
Zarzycki, A. (author)
This paper discusses the integration of physical and digital models in the context of building technology teaching. It showcases projects that explore the design possibilities of a chosen structural system with the use of parametric and behaviour-based computational modelling. It uses detailed mock-ups as vehicles to study, optimize, and...
conference paper 2013
document
Dolas, C. (author), Dieckmann, A. (author), Russell, P. (author)
The paper describes the development of a set of smart BIM components to facilitate and accelerate the creation of large-scale urban models in the early design phase in a BIM software environment. The components leverage the analytical, parametric and modelling capabilities of the BIM environment to support adaptive parameter-driven building...
conference paper 2013
document
Zají_ková, V. (author), Achten, H. (author)
In this paper we report on a recently started PhD project in which we investigate the extension of the concept of “Building Information Model” (BIM) to the domain of landscape design. The potential benefits of BIM in the field of architecture have been reported many times (e.g., Ibrahim et al., 2004; Eastman et al., 2008; Abdelmohsen et al.,...
conference paper 2013
document
Coenders, J.L. (author)
This paper presents two novel open source software developments for design and engineering in the built environment. The first development, called “sustainability-open” [1], aims on providing open source design, analysis and assessment software source code for (environmental) performance of buildings, structures and infrastructure. The aim of...
conference paper 2013
document
de Vries, Ton (author)
With more than 50% of the world’s population living in cities, and the proportion of the world’s population living in cities growing to an astonishing 70% by 2050, cities and city infrastructure become an even bigger factor in the quality of life. These numbers reflect the growth of urban areas by 2.5 billion people in the next 40 years which...
conference paper 2013
document
Van Berlo, L. (author), Dijkmans, T. (author), Stoter, J.E. (author)
This paper presents a research project in The Netherlands in which several SMEs collaborated to create a 3D model of the National spatial planning information. This 2D information system described in the IMRO data standard holds implicit 3D information that can be used to generate an explicit 3D model. The project realized a proof of concept to...
conference paper 2013
document
Mathot, Maarten (author), Coenders, J.L. (author), Rolvink, A. (author)
This paper presents the development of a novel computational framework with which expert analysis knowledge can be captured, stored and dynamically retrieved when required to determine the performance of a building design with respect to user-defined requirements. By subdividing the engineer's and designer's knowledge into discrete steps, and...
conference paper 2016
document
Oldfield, Jennifer (author), van Oosterom, P.J.M. (author), Quak, C.W. (author), Veen, Jeroen van der (author), Beetz, Jakob (author)
Much work has already been done on how a 3D Cadastre should best be developed. An inclusive information model, the Land Administration Model (LADM ISO 19152) has been developed to provide an international framework for how this can best be done. While this generic framework encompasses a wide range of eventualities, it does not prescribe the...
conference paper 2016
document
Atazadeh, Behnam (author), Kalantari, Mohsen (author), Rajabifard, Abbas (author)
There are various 3D spatial data models to support digital management of legal and physical aspects of buildings. These data models adopt three possible approaches to represent and manage spatial dimension of 3D ownership interests, namely pure legal, pure physical and integrated methods. Building Information Modelling (BIM) is a method for...
conference paper 2016
document
Oldfield, Jennifer (author), van Oosterom, Peter (author), Quak, Wilko (author), van der Veen, Jeroen (author), Beetz, Jakob (author)
Much work has already been done on how a 3D Cadastre should best be developed. An inclusive information model, the Land Administration Model (LADM ISO 19152) has been developed to provide an international framework for how this can best be done. While this generic framework encompasses a wide range of eventualities, it does not prescribe the...
conference paper 2016
document
Khoshelham, K. (author), Díaz-Vilarino, L. (author), Peter, M. (author), Kang, Z. (author), Acharya, D. (author)
Automated generation of 3D indoor models from point cloud data has been a topic of intensive research in recent years. While results on various datasets have been reported in literature, a comparison of the performance of different methods has not been possible due to the lack of benchmark datasets and a common evaluation framework. The ISPRS...
conference paper 2017
document
Xu, Man (author), Wei, S. (author), Zlatanova, S. (author), Zhang, Ruiju (author)
At present, 87 % of people's activities are in indoor environment; indoor navigation has become a research issue. As the building structures for people's daily life are more and more complex, many obstacles influence humans' moving. Therefore it is essential to provide an accurate and efficient indoor path planning. Nowadays there are many...
conference paper 2017
document
García, David (author), Plazaola, Xavier (author), Vegas, Iñigo (author), Areizaga, Pedro (author)
The presented BIM-SD tool is a software tool supporting the user in the pre-demolition audit and C&DW assessment. Its main objective is to support the collection and management of information on the existing elements and materials in a building to be demolished, the decision making around the optimal demolition sequence and the management of the...
conference paper 2017
document
Denis, F. (author), De Temmerman, N. (author), Rammer, Y. (author)
Nowadays, buildings consist in an assembly of several components and systems allowing them to fit the users’ technical, functional and comfort needs. In general, buildings’ systems and components are rather integrated into each-other and therefore, rather difficult to maintain, repair, update or dismantle separately, leading to precocious...
conference paper 2017
Searched for: +
(1 - 20 of 40)

Pages

List view
Grid view