Searched for: +
(1 - 20 of 30)

Pages

document
Meng, Yuanyuan (author), Ye, Xiangqian (author), He, Fuqiong (author), Chen, Zhipeng (author), Hu, Chichun (author), Lin, P. (author)
Terminal blended rubberized asphalt binder (TB) technology, which blends crumb tire rubber (CR) with asphalt under high interaction conditions, offers a promising waste tire recycling solution for pavement construction. By precisely controlling the degradation progress of CR, it is possible to prepare TB with specific property requirements....
journal article 2023
document
Kumbul, U. (author), Petrov, N. (author), Silveira Vaucher, C. (author), Yarovoy, Alexander (author)
Phase-coded frequency modulated continuous wave (PC-FMCW) radars for joint sensing and communication are considered. The sensing and communication performance of the two signal processing methods, phase lag compensated group delay filter and filter bank receivers, are compared. It is demonstrated that the phase lag compensated group delay...
conference paper 2023
document
Wen, Minzhen (author), Guo, Baotong (author), Chen, Shanghuan (author), Hu, X. (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)
The (Ca, Sr) AlSiN₃:Eu²⁺(CSASN:Eu) red phosphor is widely used to improve color rendering of high-power phosphor-converted lighting diode (pc-WLED), but it is always unstable under high temperature and high humidity environments. Therefore, the studies on the temperature and humidity resistance of red phosphors and their aging mechanism have...
conference paper 2023
document
van Driel, W.D. (author), Jacobs, B. (author), Watte, P. (author), Zhao, X. (author)
Reliability is an essential scientific and technological domain intrinsically linked with system integration. Nowadays, semiconductor industries are confronted with ever-increasing design complexity, dramatically decreasing design margins, increasing chances for and consequences of failures, shortening of product development and qualification...
journal article 2022
document
Illathukandy, Biju (author), Saadabadi, S.A. (author), Kuo, P.C. (author), Wasajja, H. (author), Lindeboom, R.E.F. (author), Vijay, V. (author), Aravind, P.V. (author)
This study is particularly aimed at investigating the influence of hydrogen chloride traces in biogas on direct internal reforming in solid oxide fuel cells (SOFCs). The experiments are performed with simulated biogas containing methane to carbon dioxide ratio of 3:2, the usual average proportion in biogas. To the best of our knowledge, there...
journal article 2022
document
Zhang, Jie (author), Tan, Lirong (author), Hagedoorn, P.L. (author), Wang, Ruiqi (author), Wen, Li (author), Wu, Siwei (author), Tan, Xuemei (author), Xu, Hui (author), Zhou, Xing (author)
Bisphenols are important industrial materials for example for the production of plastics, but are also well known for their adverse health effects, in particular bisphenol A (BPA) is an endocrine disruptor. The widespread use of plastics has raised concerns. Therefore, the removal of bisphenols from wastewater has sparked the interest of the...
journal article 2022
document
Wang, Qiao (author), Wilson, William (author), Scrivener, Karen (author)
If sulfate attack on Portland cement systems has been largely investigated in the last decades, mechanisms of sulfate resistance for systems with new SCMs are still in dim, especially for the emerging materials that are limestone calcined clay cements (LC³). Using a new semi-immersion approach, we forced the penetration of sulfate ions in just...
conference paper 2021
document
Fu, J. (author), Nunez, Alfredo (author), De Schutter, B.H.K. (author)
Preventive maintenance is applied in distribution networks to prevent failures by performing maintenance actions on components that are at risk. Distributed generators (DGs) and batteries can be used to support power to nearby loads when they are isolated due to maintenance. In this paper, a novel short-term preventive maintenance method is...
journal article 2021
document
Ren, S. (author), Liu, X. (author), Lin, P. (author), Wang, H. (author), Fan, W. (author), Erkens, S. (author)
The chemo-rheological properties of crumb rubber modified bitumen are always unstable due to the mutable and uncontrollable swelling-degradation degree of crumb rubber in bitumen matrix. The study aimed at exploring the continuous swelling and degradation behaviors of crumb rubber modified bitumen (CRMB) considering the influence of rubber size...
journal article 2021
document
Guo, Y. (author), Zhao, Chunfa (author), Markine, V.L. (author), Jing, Guoqing (author), Zhai, Wanming (author)
The discrete element method (DEM) has been confirmed as an effective numerical method for modelling railway ballast, and successfully used to analyse a wide range of ballast-related applications (e.g. geomaterials). However, there still exists some aspects under development. Among them, the model calibration can be the most significant one ...
review 2020
document
Kongshaug, Simen Sørgaard (author), Oseland, Oddbjørn (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Rodum, Eva (author), Markeset, Gro (author)
The alkali silica reaction (ASR) in concrete causes internal localized swelling and micro cracking, which result in expansion and correlated deterioration of the concrete material. The stress state of the concrete is known to affect expansion due to ASR, with an anisotropic stress state giving rise to anisotropic expansion. Similarly, the...
journal article 2020
document
Wang, Haoyu (author)
Transition zones in railway tracks are locations with considerable changes in the vertical stiffness of the track support, which can be found near bridges, culverts and tunnels. In such locations, the stiffness variation and the differential settlement of tracks (uneven settlement of the track on the embankment and of the engineering structure)...
doctoral thesis 2019
document
Shi, W. (author)
High efficiency, low cost, and long stability are three key factors for the wide application of photovoltaics (PV) which are currently intensively studied in order to meet the increasing global renewable energy demand. Currently, the PV market is mainly based on silicon. However, solar cells based on silicon may not be capable to meet the long...
doctoral thesis 2019
document
Guo, Y. (author), Markine, V.L. (author), Zhang, X. (author), Qiang, Weile (author), Jing, Guoquig (author)
The performance and deformation of ballast bed are significantly influenced by the particle morphology (size and shape), the rheology (translation and rotation), and the degradation (breakage and abrasion). Regarding the ballast particle morphology, the ballast particle size is generally measured by sieving and described with the Particle Size...
review 2019
document
Barendswaard, S. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, Max (author)
Vehicle control tasks require simultaneous control of multiple degrees-of-freedom. Most multi-axis human-control modeling is limited to the modeling of multiple fully independent single axes. This paper contributes to the understanding of multi-axis control behavior and draws a more realistic and complete picture of dual-axis manual control....
journal article 2019
document
Nunez, Alfredo (author), Jamshidi, A. (author), Wang, H. (author)
This paper presents a Pareto-based maintenance decision system for rail welds in a regional railway network. Weld health condition data are collected using a train in operation. A Hilbert spectrum-based approach is used for data processing to detect and assess the weld quality based on multiple registered dynamic responses in the axle box...
journal article 2018
document
Naddaf Dezfuli, S. (author), Brouwer, J.C. (author), Mol, J.M.C. (author), van der Helm, F.C.T. (author), Zhou, J. (author)
Recent studies have shown great potential of Mg matrix composites for biodegradable orthopedic devices. However, the poor structural integrity of these composites, which results in excessive localized corrosion and premature mechanical failure, has hindered their widespread applications. In this research, an in-situ Powder Metallurgy (PM)...
journal article 2018
document
Liu, C. (author), Cheng, Gang (author), Chen, Xihui (author), Pang, Y. (author)
Given local weak feature information, a novel feature extraction and fault diagnosis method for planetary gears based on variational mode decomposition (VMD), singular value decomposition (SVD), and convolutional neural network (CNN) is proposed. VMD was used to decompose the original vibration signal to mode components. The mode matrix was...
journal article 2018
document
Jacobs, B. (author), van Driel, W.D. (author), Schuld, M. (author)
Commercial claims for LED-based products in terms of lumen maintenance are fully based on TM-21 extrapolations using LM-80 data. We presented an approach based on statistical data analytics, following the work from Yu & Tseng, at EuroSimE2015. Since then, more LM80 test data came available both for High Power (HP) and Mid Power (MP) LEDs....
conference paper 2018
document
van Driel, W.D. (author), Beijer, J.G.J. (author), Bikker, J.W. (author), van Blokland, C.H.M. (author), Ankomah, C. (author), Jacobs, B. (author)
We have seen an increasing number of reported colour maintenance issues in the market when it concerns LED-based products. Besides this, there are also requests to provide products that have < 2 SDCM colour point changes over lifetime. To understand the mechanisms behind colour maintenance in our LED-portfolio we have developed a...
conference paper 2018
Searched for: +
(1 - 20 of 30)

Pages