Searched for: +
(1 - 20 of 20)
document
De Borst, R. (author)
journal article 1997
document
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
One of the challenges with the dynamic inductive power transfer (DIPT) technique is the electric vehicle detection (EVD) that helps the DIPT system to control the power supply of the transmitter. The EVD method applying auxiliary coils is a promising candidate because the flat shape of the auxiliary coils is suitable for the compact design....
journal article 2021
document
Chen, Y. (author), Gong, J. (author), Staszewski, R.B. (author), Babaie, M. (author)
In this article, we present a 4.5-5.1-GHz fractional-N digitally intensive phase-locked loop (DPLL) capable of maintaining its performance in face of a large supply ripple, thus enabling a direct connection to a switched-mode dc-dc converter. Supply pushing of its inductor-capacitor (LC) oscillator is suppressed by properly replicating the...
journal article 2022
document
Ricciardella, F. (author), Vollebregt, S. (author), Polichetti, Tiziana (author), Sarro, Pasqualina M (author), Duesberg, Georg S. (author)
Humidity sensing is fundamental in some applications, as humidity can be a strong interferent in the detection of analytes under environmental conditions. Ideally, materials sensitive or insensitive towards humidity are strongly needed for the sensors used in the first or second case, respectively. We present here the sensing properties of...
journal article 2020
document
Saccher, M. (author), Kawasaki, S. (author), Klootwijk, Johan (author), van Schaijk, Rob (author), Dekker, R. (author)
Recently, the applications of ultrasound transducers expanded from high-end diagnostic tools to point of care diagnostic devices and wireless power receivers for implantable devices. These new applications additionally require that the transducer technology must comply to biocompatibility and manufacturing scalability. In this respect,...
journal article 2023
document
Nguyen, Hoa Minh (author), Rueda, José L. (author), Lekić, A. (author), Pham, Hoan Van (author)
The paper presents an approach for online centralized control in active distribution networks. It combines a proportional integral (PI) control unit with a corrective control unit (CCU), based on the principle of Model Predictive Control (MPC). The proposed controller is designed to accommodate the increasing penetration of distributed...
journal article 2021
document
Mo, J. (author), LI, J. (author), Zhang, Y. (author), Romijn, J. (author), May, Alexander (author), Erlbacher, Tobias (author), Zhang, Kouchi (author), Vollebregt, S. (author)
In this work, a highly linear temperature sensor based on a silicon carbide (SiC) p-n diode is presented. Under a constant current biasing, the diode has an excellent linear response to the temperature (from room temperature to 600°C). The best linearity (coefficient of determination ${R}^{{2}}$ = 99.98%) is achieved when the current density...
journal article 2023
document
Egberts, G. (author), Vermolen, F.J. (author), van Zuijlen, Paul (author)
We consider a one-dimensional morphoelastic model describing post-burn scar contraction. Contraction can lead to a limited range of motion (contracture). Reported prevalence of burn scar contractures are 58.6% at 3–6 weeks and 20.9% at 12 months post-reconstructive surgery after burns. This model describes the displacement of the dermal layer...
journal article 2021
document
Egberts, G. (author), Desmoulière, Alexis (author), Vermolen, F.J. (author), van Zuijlen, Paul (author)
We consider a two-dimensional biomorphoelastic model describing post-burn scar contraction. This model describes skin displacement and the development of the effective Eulerian strain in the tissue. Besides these mechanical components, signaling molecules, fibroblasts, myofibroblasts, and collagen also play a significant role in the model. We...
journal article 2022
document
Hu, Xuanyu (author), Stark, Alexander (author), Dirkx, D. (author), Hussmann, Hauke (author), Fienga, Agnès (author), Briaud, Arthur (author), Mémin, Anthony (author), Melini, Daniele (author), Fayolle-Chambe, M.S. (author)
We investigate the impact of viscoelastic tidal deformation of the Moon on the motion of a polar orbiter. The dissipative effects in the Moon’s interior, i.e., tidal phase lags, are modeled as Fourier series sampled at given frequencies associated with linear combinations of Delaunay arguments, the fundamental parameters describing the lunar...
journal article 2023
document
Ahmadi Dastjerdi, A. (author), Hassan HosseinNia, S. (author)
Constant in gain Lead in phase (CgLp) compensators, which are a type of reset elements, have shown high potential to overcome limitations of linear control systems. There are few works which investigate the tuning of these compensators. However, there are some significant drawbacks which make those methods unreliable. First, their analyses...
journal article 2021
document
Ricciardella, F. (author), Vollebregt, S. (author), Tilmann, Rita (author), Hartwig, Oliver (author), Bartlam, Cian (author), Sarro, Pasqualina M (author), Sachdev, Hermann (author), Duesberg, Georg S. (author)
Chemical vapor deposition (CVD) has been demonstrated as a highly promising technique for the production of graphene on large scale and enabling tunability of the intrinsic defects of the films during the synthesis.<br/><br/>In this work, we report on the correlation between the density of defects (DoD) and the kinetics of interaction of multi...
journal article 2021
document
Simoes dos Santos, D. (author), Baldini, L.B. (author), Vos, H.J. (author), Verweij, M.D. (author), de Jong, N. (author), van Neer, P.L.M.J. (author)
The accurate determination of the transfer function of ultrasound transducers is important for their design and operational performance. However, conventional methods for quantifying the transfer function, such as hydrophone measurements, radiation force balance, and pulse-echo measurements, are costly and complex due to specialized equipment...
journal article 2024
document
Gürleyük, C. (author), Pan, S. (author), Makinwa, K.A.A. (author)
This article presents a 16-MHz RC frequency reference implemented in a standard 180-nm CMOS process. It consists of a frequency-locked loop (FLL) in which the output frequency of a digitally controlled oscillator (DCO) is locked to the frequency-phase characteristic of a Wien bridge RC filter. Since it is made from on-chip resistors and...
journal article 2022
document
Perko, Z. (author), van der Voort, S.R. (author), Van De Water, Steven (author), Hartman, C.M.H. (author), Hoogeman, M.S. (author), Lathouwers, D. (author)
The highly conformal planned dose distribution achievable in intensity modulated proton therapy (IMPT) can severely be compromised by uncertainties in patient setup and proton range. While several robust optimization approaches have been presented to address this issue, appropriate methods to accurately estimate the robustness of treatment...
journal article 2016
document
Liu, Z. (author), Chen, Kai (author), Li, Z. (author), Jiang, X. (author)
Fiber-reinforced polymer (FRP) has been increasingly applied to steel structures for structural strengthening or crack repair, given its high strength-to-weight ratio and high stiffness-to-weight ratio. Cracks in steel structures are the dominant hidden threats to structural safety. However, it is difficult to monitor structural cracks under...
journal article 2017
document
Theuwissen, A.J.P.A.M. (author)
This article focuses on the parasitic light sensitivity (PLS) of a commercially available CMOS camera with a global shutter (with a storage node in the charge domain) and shared pixel architecture. The PLS is characterized as a function of both the wavelength and the incident angle of the incoming light. The measurement results are linked to...
journal article 2022
document
Theuwissen, A.J.P.A.M. (author)
This article focuses on the angular dependency of the light sensitivity of a commercially available CMOS camera with a global shutter (storage node (SG) in the charge domain) and shared pixel architecture. The angular dependency is characterized as a function of both the wavelength and the angle of incidence of the incoming light. The...
journal article 2022
document
Sabbadini, A. (author), Massaad Mouawad, J.M. (author), van Neer, P.L.M.J. (author), de Jong, N. (author), Verweij, M.D. (author)
In recent years, several fitting techniques have been presented to reconstruct the parameters of a plate from its Lamb wave dispersion curves. Published studies show that these techniques can yield high accuracy results and have the potential of reconstructing several parameters at once. The precision with which parameters can be...
journal article 2022
document
Peters, Luka (author), Serhat, Gokhan (author), Vardar, Y. (author)
Thermal feedback has been proven to enhance user experience in human-machine interactions. Yet state-of-the-art thermal technology has focused on the single finger or palm in static contact, overlooking dynamic and multi-finger interactions. The underlying challenges include incompatible designs of conventional interfaces for providing...
journal article 2023
Searched for: +
(1 - 20 of 20)