- document
-
Kongshaug, Simen Sørgaard (author), Larssen, Rolf Magne (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)Material modelling, from the micro to the macro level, of concrete affected by alkali–silica reaction (ASR) has been devoted a lot of research. However, the application of the material models in structural analyses of reinforced concrete (RC) structures, showing the structural implications/consequences of ASR, has got little attention in the...journal article 2021
- document
-
Truong-Hong, Linh (author), Nguyen, N. (author), Lindenbergh, R.C. (author), Fisk, P. (author), Huynh, T. (author)This paper proposes a methodology to automatically extract components of an oil storage tank from terrestrial laser scanning (TLS) point clouds, and subsequently to create a three-dimensional (3D) solid model of the tank for numerical simulation. The proposed method is integrated into a smart analysis layer of a digital twin platform...journal article 2021
- document
-
Gutierrez Alvarez, J. (author), Bisagni, C. (author)This paper presents an experimental and numerical study of composite plates, analyzing the interaction between mechanical and thermal loads related to buckling and the occurrence of mode jumping. A novel experimental setup for thermomechanical testing was developed. The setup is conceived around a frame with a low coefficient of thermal...journal article 2022
- document
-
Huo, L. (author), Kassapoglou, C. (author), Alderliesten, R.C. (author)To develop a simplified and physically sound delamination-failure criterion, this paper reports a joint experimental and numerical study in which out-of-plane quasi-static indentations with different indentation forces were applied to the centre of fully clamped rectangular carbon fibre-reinforced polymer (CFRP) laminates. The results show that...journal article 2022
- document
-
Song, X. (author), Liu, D. (author), Polinder, H. (author), Mijatovic, Nenad (author), Holbøll, Joachim (author), Jensen, Bogi Bech (author)Direct drive high temperature superconducting (HTS) wind turbine generators have been proposed to tackle challenges for ever increasing wind turbine ratings. Due to smaller reactances in HTS generators, higher fault currents and larger transient torques could occur if sudden short circuits happen at generator terminals. In this paper, a finite...journal article 2017
- document
-
Dermentzoglou, Dimitrios (author), Castellino, Myrta (author), De Girolamo, Paolo (author), Partovi, Maziar (author), Schreppers, Gerd-Jan (author), Antonini, A. (author)Several failures of recurved concrete crownwalls have been observed in recent years. This work aims to get a better insight within the processes underlying the loading phase of these structures due to non-breaking wave impulsive loading conditions and to identify the dominant failure modes. The investigation is carried out through an offline one...journal article 2021
- document
-
Cheng, Xiaoyang (author), Diambra, Andrea (author), Ibraim, Erdin (author), Liu, H. (author), Pisano, F. (author)Based on advanced 3D finite element modelling, this paper analyses the stress paths experienced by soil elements in the vicinity of a monopile foundation for offshore wind turbines subjected to cyclic loading with the aim of informing soil laboratory testing in support of monopile foundation design. It is shown that the soil elements in front of...journal article 2021
- document
-
Cheng, L. (author), Xin, H. (author), Groves, R.M. (author), Veljkovic, M. (author)Acoustic emission (AE) is often used for structural health monitoring (SHM) in the wide field of engineering structures and one of its most beneficial attributes is the ability to localize the damage/crack based on the AE events. The vast majority of ongoing work on AE monitoring focues on geometrically simple structures or a confined area,...journal article 2021
- document
-
Jeon, Jaemin (author), Kim, Jaeyong (author), Lee, Jong Jun (author), Shin, D. (author), Kim, Yoon Young (author)This study presents a new modeling technique to estimate the stiffness matrix of a thin-walled beam-joint structure using deep learning. When thin-walled beams meet at joints, significant sectional deformations occur, such as warping and distortion. These deformations should be considered in the one-dimensional beam analysis, but it is...journal article 2022
- document
-
Zhan, Shi (author), Jiang, Dajun (author), Ling, Ming (author), Ding, Jian (author), Yang, Kai (author), Duan, Lei (author), Tsai, Tsung Yuan (author), Feng, Yong (author), van Trigt, B. (author), Jia, Weitao (author), Zhang, Changqing (author), Hu, Hai (author)Femoral neck fractures (FNFs) in young patients usually result from high-energy violence, and the vertical transcervical type is typically challenging for its instability. FNFs are commonly treated with three cannulated screws (CS), but the role of screws type on fixation effects (FE) is unclear. The purpose of this study was to evaluate the...journal article 2021
- document
-
Kongshaug, Simen Sørgaard (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)Alkali–silica reaction (ASR) in concrete causes expansion and degradation of the material, which might give adverse structural consequences. From the structural engineer point view, the greatest concern is if ASR leads to loss of structural integrity. Two natural questions arise when assessing existing concrete structures affected by ASR: (1)...journal article 2022
- document
-
Luraghi, G. (author), Bridio, Sara (author), Lissoni, Vittorio (author), Dubini, Gabriele (author), Dwivedi, Anushree (author), McCarthy, Ray (author), Fereidoonnezhad, B.F. (author), McGarry, Patrick (author), Gijsen, F.J.H. (author)Mechanical thrombectomy (MT) treatment of acute ischemic stroke (AIS) patients typically involves use of stent retrievers or aspiration catheters alone or in combination. For in silico trials of AIS patients, it is crucial to incorporate the possibility of thrombus fragmentation during the intervention. This study focuses on two aspects of...journal article 2022
- document
-
Feng, W. (author), He, P. (author), Pavlovic, M. (author)Wrapped composite joint is a novel joining technology which connects steel hollow sections through bonding, completely avoiding the welding in the load transferring mechanism. Fatigue performance of wrapped joints has been experimentally shown to be superior over their welded counterparts. Aiming to enable development of prediction methods...journal article 2022
- document
-
Jadwiga Osmolska, Magdalena (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Markeset, Gro (author)Corrosion and shear cracking are frequently observed near supports of pretensioned bridge girders in coastal climates, so non-linear finite element analysis was used to study the effect of corrosion on shear performance in a real case study. Varying degrees of corrosion and various locations (top strands, bottom strands, vertical stirrups and...journal article 2022
- document
-
Martinelli, Cristiano (author), Coraddu, A. (author), Cammarano, Andrea (author)Most of the optimisation studies of Vibration Energy Harvesters (VEHs) account for a single output quantity, e.g. frequency bandwidth or maximum power output, but this approach does not necessarily maximise the system efficiency. In those applications where VEHs are suitable sources of energy, to achieve optimal design it is important to...journal article 2022
- document
-
van Dooren, K.S. (author), Tijs, B.H.A.H. (author), Waleson, J. E.A. (author), Bisagni, C. (author)Two aeronautical thermoplastic composite stiffened panels are analysed and tested to investigate the buckling behaviour, the skin-stringer separation and the final failure mode. The panels are made of fast crystallising polyetherketoneketone carbon composite, have three stringers with an angled cap on one side, and are joined to the skin by a...journal article 2023
- document
-
Cheng, L. (author), Yang, Fei (author), Seidel, Marc (author), Veljkovic, M. (author)The overall competitiveness of offshore wind turbine towers is significantly influenced by the selection of the connection. The following three types of connections: a conventional bolted ring flange (RF) connection, ring flange connection with defined contact surfaces (RFD), and C1 wedge connection (C1-WC) are considered. A quantitative...journal article 2023
- document
-
Roudbarian, Nima (author), Jebellat, Ehsan (author), Famouri, Seyedfarzad (author), Baniasadi, Mahdi (author), Hedayati, R. (author), Baghani, Mostafa (author)Triply periodic minimal surfaces (TPMS) metamaterials and shape-memory polymer (SMP) smart materials are known for their beneficial attributes in novel scientific and industrial fields. Through TPMS designs, low weight accompanied by high surface area are achievable, which are known as crucial parameters in many fields, such as tissue...journal article 2022
- document
-
Numerical analysis and discussion on the hot-spot stress concept applied to welded tubular KT jointsVieira Ávila, Bianca (author), Correia, J.A.F.O. (author), Carvalho, Hermes (author), Fantuzzi, Nicholas (author), De Jesus, Abílio (author), Berto, Filippo (author)Nominal stresses have been used for a long time for the assessment of fatigue resistance of welded joints, however, this approach has strong limitations since the definition of the nominal stress may be subjective for complex welded details and/or complex loading. On the other hand, the hot-spot stress approach has been proposed to overcome...journal article 2022
- document
-
Vescovini, A. (author), Li, Carina Xiaochen (author), Paz Mendez, J. (author), Jin, Bo Cheng (author), Manes, Andrea (author), Bisagni, C. (author)This paper presents the work on six single-stringer specimens manufactured using the card-sliding technique with non-crimp fabrics and adopting a Double-Double (DD) stacking sequence. These specimens, representative of sub-structure level components, are used to investigate post-buckling and failure in aerospace structures. Two specimens...journal article 2024