Interaction between hydrodynamics and salt marsh dynamics: An example from Jiangsu coast

Salt marshes are distributed along more than 400 km of the Jiangsu coast in Eastern China, which are regarded as important habitats and serve as coastal protection as well. Previous research has proven that salt-marsh vegetation can reduce current velocity and dampen waves by its stems and leaves. Reversely, hydrodynamic forces also have a...

Multiscale modeling scheme for cementitious materials

Simulation of self-healing by further hydration in cement-based materials (abstract)

3D Simulation of micromechanical behavior of cement paste

Numerical modeling of fracture processes of brittle materials, such as cement paste, mortar, concrete and rocks, started in the late 1960s when the discrete and smeared cracking models were introduced. In the 1990s, Schlangen and van Mier proposed another numerical model to compensate the drawbacks of the discrete and smeared cracking models,...

Three-dimensional Modeling of Anode-supported Planar SOFC with Direct Internal Reforming

This paper presents a three-dimensional model of an anode-supported planar SOFC with corrugated bipolar plates serving as gas channels and current collector above the active area of the cell, based on the direct internal reforming reaction of methane and the electrochemical reaction of hydrogen. A co-flow system with gas mixture of methane,...

Three-dimensional Modeling of Anode-supported Planar SOFC with Direct Internal Reforming

Development of engineered cementitious composites with limestone powder and blast furnace slag

Nowadays limestone powder and blast furnace slag (BFS) are widely used in concrete as blended materials in cement. The replacement of Portland cement by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production of these two materials needs less energy and causes less CO2 emission than Portland cement...

Simulation of connectivity of capillary porosity in hardening cement-based systems made of blended materials

In recent years, the durability of reinforced or prestressed concrete structures has become a main concern. A key parameter in durability predictions is the microstructure of the surface zone of concrete structures, i.e. the “covercrete”, more in particular the connectivity of the pores in the cement paste matrix. In this paper, the connectivity...

Investigation of Corrosion and Cathodic Protection in Reinforced Concrete. II: Properties of Steel Surface Layers

The present study explores the formation of corrosion products on the steel surface (using as-received low carbon construction steel) in reinforced concrete in conditions of corrosion and subsequent transformation of these layers in conditions of cathodic protection (CP).

Hand held analog television over WiMAX executed in SW

This paper describes a device capable of performing the following tasks: it samples and decodes the composite video analog TV signal, it encodes the resulting RGB data into a MPEG-4 stream and sends it over a WiMAX link. On the other end of the link a similar device receives the WiMAX signal, in either TDD or FDD mode, decodes the MPEG data and...

Numerical simulation of the hydration process and the development of microstructure of self-compacting cement paste containing limestone as filler

High performance repetitive control of PWM DC-AC converters with real-time phase-lead FIR filter

Experimental Study and Numerical Simulation of the Development of the Microstructure and Permeability of Cementitious Materials

The aim of this thesis was to investigate and to simulate the development of the microstructure, porosity and permeability in hardening cement-based materials. Based on experimental information and the cement hydration model HYMOSTRUC, the microstructural details including porosity, connectivity of pores and pore size distribution were...

Three-dimensional Microstructure Simulation Model of Cement Based Materials,

This paper describes a computer-based numerical model for the simulation of the development of microstructure during cement hydration. Special emphasis is on the algorithm for characterizing the pores. This includes the porosity and the pore size distribution and the topological properties of the porous network. In order to do so, a serial...

Comparison and validation of two Dutch models of breach growth in sandy dikes

In order to develop a new philosophy of flood safety in terms of probability of a certain level, two mathematical models of breach growth in sandy dikes have become available to determine the flood discharge in case of dike failure. BREACHES 1.0, developed at Alkyon/Delft Hydraulics (Steetzel) and BRES 1.0 at Delft University of Technology ...