Searched for: +
(41 - 60 of 272)

Pages

document
Lee, M. (author), Robin, M.P. (author), Guis, R.H. (author), Filippozzi, U. (author), Shin, D. (author), van Thiel, T.C. (author), Paardekooper, Stijn P. (author), Renshof, Johannes R. (author), van der Zant, H.S.J. (author), Caviglia, A. (author), Verbiest, G.J. (author), Steeneken, P.G. (author)
Although 2D materials hold great potential for next-generation pressure sensors, recent studies revealed that gases permeate along the membrane-surface interface, necessitating additional sealing procedures. In this work, we demonstrate the use of free-standing complex oxides as self-sealing membranes that allow the reference cavity beneath...
journal article 2022
document
Lee, Kelvin (author), Jiang, Yu (author), Ceder, Avishai (Avi) (author), Dauwels, J.H.G. (author), Su, Rong (author), Nielsen, Otto Anker (author)
With the emergence of innovations associated with public transport (PT) services, such as Mobility-as-a-Service, demand responsive transit, and autonomous vehicles, the door-to-door PT journey is achievable via multiple transfers between and within different PT modes. As such, seamless transfers between different modes of public...
journal article 2022
document
Park, Ji Won (author), Kim, S. (author), Noh, Jin Hyung (author), Bae, Young Ho (author), Lee, Jae Woo (author), Maeng, Sung Kyu (author)
From 2022, industrial wastewater discharge regulations in South Korea will replace chemical oxygen demand (COD<sub>Mn</sub>) with total organic carbon (TOC). A shift from COD<sub>Mn</sub> to TOC is a pioneering change in protecting water bodies from organic contaminants. However, several industries are struggling to meet these TOC...
journal article 2022
document
Jeon, Jaemin (author), Kim, Jaeyong (author), Lee, Jong Jun (author), Shin, D. (author), Kim, Yoon Young (author)
This study presents a new modeling technique to estimate the stiffness matrix of a thin-walled beam-joint structure using deep learning. When thin-walled beams meet at joints, significant sectional deformations occur, such as warping and distortion. These deformations should be considered in the one-dimensional beam analysis, but it is...
journal article 2022
document
Lee, Yuan (author), Bersin, Eric (author), Dahlberg, E.A. (author), Wehner, S.D.C. (author), Englund, Dirk (author)
The past decade has seen tremendous progress in experimentally realizing the building blocks of quantum repeaters. Repeater architectures with multiplexed quantum memories have been proposed to increase entanglement distribution rates, but an open challenge is to maintain entanglement fidelity over long-distance links. Here, we address this...
journal article 2022
document
Choi, Yeon Sik (author), Jeong, Hyoyoung (author), Yin, Rose T. (author), Avila, Raudel (author), Pfenniger, Anna (author), Yoo, Jaeyoung (author), Lee, Jong Yoon (author), Tzavelis, Andreas (author), Rwei, A.Y. (author)
Temporary postoperative cardiac pacing requires devices with percutaneous leads and external wired power and control systems. This hardware introduces risks for infection, limitations on patient mobility, and requirements for surgical extraction procedures. Bioresorbable pacemakers mitigate some of these disadvantages, but they demand pairing...
journal article 2022
document
Kim, Seon Hu (author), Lee, Cheol Ho (author), Han, Sang Hui (author), Wardenier, J. (author)
In this study, existing deformation limits are first re-examined to investigate if they can be rationally extended to high strength steel circular hollow section (CHS) joints that are subjected to in-plane bending (IPB) moment. It is pointed out that existing deformation limits, which have been developed and validated primarily for mild steel...
journal article 2022
document
Siskins, M. (author), Kurdi, S. (author), Lee, M. (author), Slotboom, Benjamin J.M. (author), Xing, Wenyu (author), Mañas-Valero, Samuel (author), Coronado, Eugenio (author), Jia, Shuang (author), Han, Wei (author), van der Sar, T. (author), van der Zant, H.S.J. (author), Steeneken, P.G. (author)
Two-dimensional magnetic materials with strong magnetostriction are attractive systems for realizing strain-tuning of the magnetization in spintronic and nanomagnetic devices. This requires an understanding of the magneto-mechanical coupling in these materials. In this work, we suspend thin Cr<sub>2</sub>Ge<sub>2</sub>Te<sub>6</sub> layers...
journal article 2022
document
Park, S.Y. (author), Lee, Kyung Hoon (author)
Data on the decision-making process of residential burglars at the micro-level are scarce. Furthermore, to the best of our knowledge, none of the related studies have investigated multiple relationships between the design features of a target, a burglar’s assessment of effort and risk involved in the crime, and the final decision on target...
journal article 2022
document
Xu, Shihao (author), Yang, Zixu (author), Chakraborty, Debsubhra (author), Chua, Yi Han Victoria (author), Tolomeo, Serenella (author), Winkler, Stefan (author), Birnbaum, Michel (author), Tan, Bhing Leet (author), Lee, Jimmy (author), Dauwels, J.H.G. (author)
Schizophrenia (SCZ) and depression (MDD) are two chronic mental disorders that seriously affect the quality of life of millions of people worldwide. We aim to develop machine-learning methods with objective linguistic, speech, facial, and motor behavioral cues to reliably predict the severity of psychopathology or cognitive function, and...
journal article 2022
document
Ruponen, Pekka (author), van Basten Batenburg, Rinnert (author), van't Veer, Riaan (author), Braidotti, Luca (author), Bu, Shuxia (author), Dankowski, Hendrik (author), Lee, Gyeong Joong (author), Mauro, F. (author), Ruth, Eivind (author), Tompuri, Markus (author)
Large cruise ships can carry 10 000 persons onboard, and consequently, survivability of the ship in the event of a flooding accident is essential. Many designers are already conducting advanced damage stability analyses beyond the regulatory requirements. With increased computing capacity, survivability analyses, by using time-domain...
journal article 2022
document
Lee, J. (author), Mitici, M.A. (author)
Aircraft maintenance design aims to identify strategies that render the aircraft reliable for flight in a cost-efficient manner. These are often conflicting objectives. Moreover, existing studies on maintenance design often limit themselves to only one type of maintenance strategy, overlooking other potentially dominating designs. We propose...
journal article 2022
document
Lee, Shenae (author), Khakzad, Nima (author), Schmitz, P.J.H. (author), Reniers, G.L.L.M.E. (author), Habrekke, Solfrid (author), Paltrinieri, Nicola (author)
Hazardous events in process plants like the leakage of dangerous substances can result in severe damage, and such an event is often defined as the TOP event of a fault tree analysis (FTA) in a quantitative risk analysis. The TOP event probability can then be calculated if the basic events probabilities are provided. These probabilities are often...
journal article 2022
document
Lee, M. (author), Renshof, Johannes R. (author), van Zeggeren, K.J. (author), Houmes, M.J.A. (author), Lesne, E.L. (author), Siskins, M. (author), van Thiel, T.C. (author), Guis, R.H. (author), van Blankenstein, M.R. (author), Verbiest, G.J. (author), Caviglia, A. (author), van der Zant, H.S.J. (author), Steeneken, P.G. (author)
Suspended piezoelectric thin films are key elements enabling high-frequency filtering in telecommunication devices. To meet the requirements of next-generation electronics, it is essential to reduce device thickness for reaching higher resonance frequencies. Here, the high-quality mechanical and electrical properties of graphene electrodes...
journal article 2022
document
Verwei, H.N. (author), Lee, Gloria (author), Leech, Gregor (author), Istúriz Petitjean, I. (author), Koenderink, G.H. (author), Robertson-Anderson, Rae M. (author), McGorty, Ryan James (author)
Cells can crawl, self-heal, and tune their stiffness due to their remarkably dynamic cytoskeleton. As such, reconstituting networks of cytoskeletal biopolymers may lead to a host of active and adaptable materials. However, engineering such materials with precisely tuned properties requires measuring how the dynamics depend on the network...
journal article 2022
document
Rodríguez, Ariel Antonio (author), Escanilla, David Eduardo (author), Caroca, Luis Alberto (author), Albornoz, Christian Eduardo (author), Marshall, Paulina Andrea (author), Molenbroek, J.F.M. (author), Lee, Wonsup (author), Viviani, Carlos (author), Castellucci, Héctor Ignacio (author)
BACKGROUND: An appropriate match between a product and its end-users requires anthropometric data, which show variations among different countries. Proper Personal Protection Equipment (PPE) fit is key for safety and comfort. Chile had no head and facial anthropometric data available in order to design face/head PPE. OBJECTIVE: To describe...
journal article 2022
document
Kleger, Nicole (author), Fehlmann, S. (author), Lee, Seunghun S. (author), Dénéréaz, Cyril (author), Cihova, Martina (author), Paunović, Nevena (author), Bao, Yinyin (author), Leroux, Jean Christophe (author), Masania, K. (author)
3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a universal manufacturing platform is reported for shaping materials into intricate...
journal article 2022
document
Wang, Jianqiang (author), Gao, Yixun (author), Chen, Fengjia (author), Zhang, Lulu (author), Li, Hao (author), De Rooij, Nicolaas Frans (author), Umar, Ahmad (author), Lee, Yi Kuen (author), French, P.J. (author)
Implementing parts per billion-level nitric oxide (NO) sensing at room temperature (RT) is still in extreme demand for monitoring inflammatory respiratory diseases. Herein, we have prepared a kind of core-shell structural Hemin-based nanospheres (Abbr.: Hemin-nanospheres, defined as HNSs) with the core of amorphous Hemin and the shell of...
journal article 2022
document
Nordhoff, S. (author), Louw, Tyron (author), Madigan, Ruth (author), Lee, Yee Mun (author), Innamaa, Satu (author), Lehtonen, Esko (author), Malin, Fanny (author), Bjorvatn, Afsaneh (author), Happee, R. (author), Merat, Natasha (author)
The L3Pilot project tested SAE Level 3 (L3) conditionally automated driving functions addressing driving and travel behavior, impacts on safety, efficiency, environment and socio-economics, and user acceptance. To investigate individual variance in acceptance of conditionally automated cars, an online survey was performed among 18,631...
journal article 2022
document
Jánoska, A. (author), Verheijen, Jelle J. (author), Tang, W. (author), Lee, Queenie (author), Sikkema, Baukje (author), van Gulik, W.M. (author)
In large-scale bioreactors, there is often insufficient mixing and as a consequence, cells experience uneven substrate and oxygen levels that influence product formation. In this study, the influence of dissolved oxygen (DO) gradients on the primary and secondary metabolism of a high producing industrial strain of Penicillium chrysogenum was...
journal article 2022
Searched for: +
(41 - 60 of 272)

Pages