Searched for: +
(41 - 60 of 168)

Pages

document
Wang, S. (author), Yang, Huiru (author), Zong, Qihang (author), Huang, Qianming (author), Tan, C. (author), Gao, Chenshan (author), Li, Shizhen (author), Ye, H. (author), Zhang, Kouchi (author), French, P.J. (author)
In recent years, metal crack-based stretchable flexible strain sensors have attracted significant attention in wearable device applications due to their extremely high sensitivity. However, the tradeoff between sensitivity and detection range has been an intractable dilemma, severely limiting their practical applications. Herein, we propose a...
journal article 2023
document
Zhang, Chunbo (author), Hu, Mingming (author), van der Meide, Marc (author), Di Maio, F. (author), Yang, Xining (author), Gao, Xiaofeng (author), Li, Kai (author), Zhao, Hailong (author), Li, Chen (author)
Meeting the current demand for concrete requires not only mining tons of gravel and sand, but also burning large amounts of fossil fuel resources in cement kilning. Consequently, concrete recycling is crucial to achieving a material-efficient society, especially with the application of various categories of concrete and the goal of phasing...
journal article 2023
document
Zhang, Qunli (author), Zhao, Wenqiang (author), Sun, Donghan (author), Meng, Xiangzhao (author), Hooman, K. (author), Yang, Xiaohu (author)
NO<sub>x</sub> emission reduction from gas boilers has become a key issue in improving air quality. Combustion air humidification technology is gradually being used to reduce NO<sub>x</sub> emissions. However, the NO<sub>x</sub> emission reduction effect of gas boilers at a higher combustion air humidity has been studied less. A flue gas with...
journal article 2023
document
Liang, Y. (author), Yang, Jianan (author), Zhang, Lixian (author), Baldi, S. (author), De Schutter, B.H.K. (author)
journal article 2023
document
Wang, Jinke (author), Tan, Weimin (author), Yang, Hao (author), Rao, Xingxing (author), Luo, Xinliang (author), Ma, Lingwei (author), Ren, Chenhao (author), Mol, J.M.C. (author), Zhang, Dawei (author)
In this work, an active protective epoxy coating with weathering resistant, corrosion-warning, and self-healing properties was developed by incorporating tannic acid (TA) loaded mesoporous silica (MSN-TA) nanocontainers. The introduction of MSN-TA nanocontainers could alleviate the coating degradation via scavenging the radicals generated...
journal article 2023
document
Yang, Fan (author), Zhang, P. (author), Wang, Yuan (author), Wei, Kai (author), Dong, Liwei (author), Wang, Ping (author)
The coupled vehicle-track system (CVTS) dynamics have been extensively investigated for decades. However, the calculation accuracy of prevailing vehicle-track coupling models needs to be improved in the high frequency range due to the inappropriate model simplification and neglect of material nonlinearity. In this study, we propose a refined...
journal article 2023
document
Zhao, Changjiu (author), Zhang, Wenjun (author), Chen, C.Y. (author), Yang, Xue (author), Yue, Jingwen (author), Han, Bing (author)
In the maritime industry, unsafe behaviors exhibited by crew members are a significant factor contributing to shipping and occupational accidents. Among these behaviors, unsafe operation of mooring lines is particularly prone to causing severe accidents. Video-based monitoring has been demonstrated as an effective means of detecting these...
journal article 2023
document
Li, Xueqiang (author), Zhang, Zhongyao (author), Wang, Qihui (author), Yang, Xiaohu (author), Hooman, K. (author), Liu, Shengchun (author)
Air cooling systems are widely used in current data centers owing to their low capital costs and high reliability. To satisfy the increasing rack power density, the optimal air-cooling technology and an economic analysis should be carefully discussed. Therefore, this study discusses four airflow management technologies: Case 1: raised floor...
journal article 2023
document
Wang, Jian (author), Qin, Hongbo (author), Chen, Junfu (author), Yang, Daoguo (author), Zhang, Kouchi (author)
In this study, first-principles calculations were utilized to investigate the lattice constants, elastic constants, and mechanical properties of gold–copper (Au–Cu) intermetallic compounds (IMCs), including AuCu3, AuCu, and Au3Cu. We also verified the direction dependence of the Young’s modulus, shear modulus, and Poisson’s ratio of the...
journal article 2022
document
Chang, Ziyi (author), Zhang, Yunshan (author), Yang, Changgui (author), Luo, Yuxuan (author), Du, S. (author), Chen, Yong (author), Zhao, Bo (author)
The size of wireless systems is required to be reduced in many applications, such as ultra-low-power sensor nodes and wearable/implantable devices, where battery and crystal are the two main bottlenecks in system miniaturization. In recent years, battery-free radios based on wireless power transfer (WPT) have shown great potential in...
journal article 2022
document
Bittner, M. (author), Yang, W. (author), Zhang, X. (author), Seth, A. (author), van Gemert, J.C. (author), van der Helm, F.C.T. (author)
Markerless estimation of 3D Kinematics has the great potential to clinically diagnose and monitor movement disorders without referrals to expensive motion capture labs; however, current approaches are limited by performing multiple de-coupled steps to estimate the kinematics of a person from videos. Most current techniques work in a multi-step...
journal article 2022
document
Lai, F. (author), Zhang, Ningning (author), Liu, Songyu (author), Yang, Dayu (author)
Active earth pressure on retaining structures supporting a narrow column of soil cannot be properly analysed using Coulomb's theory. Finite element limit analysis (FELA) shows that the soil form multiple failure surfaces if the soil column is sufficiently narrow. This paper proposes a framework for active earth pressure estimation for narrow...
journal article 2022
document
Yang, Zhengxian (author), Shi, Peng (author), Zhang, Yong (author), Li, Z. (author)
The influences of liquid-binder ratio and mixing sequence on the performance of superabsorbent polymer (SAP)-containing alkali-activated slag (AAS) mortar are investigated in this study. It is found that the SAP absorbs much less liquid in upper supernatant of AAS than in water. Mixing SAP with liquid first induces a larger absorption...
journal article 2022
document
Zhang, F. (author), Yang, Y. (author), Fennis, Sonja A.A.M. (author), Hendriks, M.A.N. (author)
Acoustic emission (AE) signal parameters can be used to classify the source type in concrete structures. However, signal parameters are influenced by the wave propagation from the source to the receiver, leading to wrong source classification results, especially for monitoring large concrete structures. This paper experimentally evaluates the...
journal article 2022
document
Zhang, Chunbo (author), Hu, Mingming (author), Di Maio, F. (author), Sprecher, B. (author), Yang, Xining (author), Tukker, Arnold (author)
The construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and waste management system in the construction sector to a level of high circularity. Based on the theory of circular economy, a new paradigm called waste...
review 2022
document
Liang, Peijie (author), Pan, Zhiliang (author), Tang, Liang (author), Zhang, Kouchi (author), Yang, Daoguo (author), He, Siliang (author), Yan, Haidong (author)
Based on molecular dynamics (MD), in this study, a model was established to simulate the initial coating morphology of silver paste by using a random algorithm, and the effects of different sizes of particles on sintering porosity were also analyzed. The MD result reveals that compared with the sintering process using large-scale silver...
journal article 2022
document
Zhang, F. (author), Yang, Y. (author), Naaktgeboren, N.M. (author), Hendriks, M.A.N. (author)
This paper proposes a new damage identification method, namely, the probability density field of acoustic emission (AE) events. This new method provides a different perspective to deal with the uncertainties in the source localization process. We treat the source location as a random variable, and estimate its probability density field based...
journal article 2022
document
Zhang, Yuquan W. (author), Geng, Yong (author), Zhang, Bin (author), Yang, Shaohua (author), Izikowitz, David V. (author), Yin, Haitao (author), Wu, F. (author), Yu, Haishan (author), Liu, Huiwen (author), Zhou, Weiduo (author)
Very few developed economies have a full free trade agreement (FTA) with China. This study employs one GTAP model and builds an extended environmental multi-region input–output model to investigate a hypothetical China-UK FTA, concerning embodied industrial emissions of SO2, PM2.5, NOX, and NH3. The economic sectors are also classified based on...
journal article 2022
document
Yao, Dengzhi (author), Wang, Ju (author), Cai, Yao (author), Zhao, Tingting (author), An, Xizhong (author), Zhang, Hao (author), Fu, Haitao (author), Yang, Xiaohong (author), Zou, Qingchuan (author), Wang, L. (author)
Understanding and controlling the composition segregation during powder spreading is of key importance in the additive manufacturing (AM) of composite materials. Under this circumstance, the segregation behavior of WC/316 L composite powders during spreading in laser powder bed fusion (LPBF) AM was numerically investigated by the discrete...
journal article 2022
document
He, C. (author), Yang, Z. (author), Zhang, P. (author), Li, S. (author), Naeimi, M. (author), Li, Z. (author)
Polygonal wear is a common type of damage on the railway wheel tread, which could induce wheel-rail impacts and further components failure. This study presents a finite element (FE) thermomechanical model to investigate the causes of wheel polygonal wear. The FE model is able to cope with three possible causes of polygonal wear: thermal...
conference paper 2022
Searched for: +
(41 - 60 of 168)

Pages