Searched for: +
(61 - 80 of 331)

Pages

document
Li, Jinxuan (author), Liu, Shuxue (author), Zhao, Min (author), Teng, Bin (author)
conference paper 2013
document
Jamshidi, A. (author), Nunez, A.A. (author), Li, Z. (author)
conference paper 2015
document
Li, J. (author), Scarpas, A. (author), Tzimiris, G. (author), Kasbergen, C. (author), Hofman, R. (author), Voskuilen, J. (author)
The French five-point bending test (5PBT) provides a laboratory scale test that allows studying the fatigue resistance of surfacing systems on orthotropic steel deck bridges (OSDB). The surfacing structure for OSDB in the Netherlands consists mostly of multilayer system: top porous asphalt layer, guss asphalt layer, steel deck and two membrane...
conference paper 2013
document
Ying, S. (author), Guo, R. (author), Li, L. (author), Van Oosterom, P.J.M. (author), Ledoux, H. (author), Stoter, J.E. (author)
In this paper the design and development of a prototype 3D Cadastral system will be presented. The key aspects of this system are that the model is based on Land Administration Domain Model (LADM) and that the spatial profile is based on a full 3D topological structure. The prototype development starts with profiling the LADM (selecting relevant...
conference paper 2011
document
Oregui, M. (author), Li, Z. (author), Dollevoet, R.P.B.J. (author)
Rail joints have a shorter service life than most other railway track components. The discontinuity between rail ends turns the rail joint into a weak spot, and consequently, into a track component demanding more frequent maintenance measures, which result in high maintenance costs. Moreover, difficulties are often found when assessing the...
conference paper 2012
document
Verhagen, A.A. (author), Teunissen, P.J.G. (author), Van der Marel, H. (author), Li, B. (author)
A key issue with GNSS carrier phase ambiguity resolution is that often the full set of ambiguities cannot be fixed fast and reliably. A possible strategy is then to resolve only a subset of ambiguities, one for which the probability of correct fixing, the so-called success rate, is sufficiently close to 1. However, a proper subset selection...
conference paper 2011
document
Shen, L. (author), Li, S.B. (author), Van der Zwaag, S. (author), Sloof, W.G. (author)
The oxidation crack healing of Cr2AlC and Cr2(Al,Si)C was studied and compared with known healing of Ti2AlC. The oxidation induced crack healing of Ti2AlC is relatively fast and leads to full strength recovery, but the oxidation product contains besides ?-Al2O3 also undesired TiO2. However, when oxidizing Cr2AlC only ?-Al2O3 is formed, but full...
conference paper 2013
document
Ying, Shen (author), Guo, Renzhong (author), Li, Lin (author), He, Biao (author)
Rapid development has promoted the 3D land use in the urban environment with the increasing requirements of the complex interweaving, such as dwellings, commercial areas, public transportation and urban utilities and infrastructure.3D cadastral object are features which concern unban planning, land resource and real estate of municipalities,...
conference paper 2012
document
Ying, Shen (author), Guo, Renzhong (author), Li, Lin (author), Chen, Naibin (author), Jia, Yizhen (author)
The Interim Regulation on Real-Estate Registration (IRRER) was issued by the State Council of the People’s Republic of China (SCPRC) in 2014 and took effect on March 1, 2015. This regulation stipulates that the Ministry of Land and Resources of the People’s Republic of China (MLRPRC) will be responsible for the duties of real-estate registration...
conference paper 2018
document
Tsaoulidis, D. (author), Li, Q. (author), Angeli, P. (author)
The hydrodynamic characteristics of liquid-liquid segmented flow in small channels were studied using bright field ?-PIV. Experiments were carried out in a 0.5 mm ID channel made of PFA and flow parameters key for mass transfer applications, such as film thickness, circulation patterns and plug length were measured. The two test liquids used...
conference paper 2013
document
Li, K. (author), Stroeven, M. (author), Stroeven, P. (author), Sluys, L.J. (author)
conference paper 2013
document
Guo, Renzhong (author), Luo, Feng (author), Zhao, Zhigang (author), He, Biao (author), Li, Lin (author), Luo, Ping (author), Ying, Shen (author)
As the economy and urbanization develop, the expansion of the city not only develops towards the horizontal space, but also towards the vertical space. Facing the development of three-dimensional (3D) space, the traditional two-dimensional (2D) cadastral management mode cannot satisfy the need of current 3D land use and urban plan, so developing...
conference paper 2014
document
Siverd, C. (author), Arecco, P. (author), Li, Y. (author), Van der Toorn, A. (author)
conference paper 2015
document
Yang, Jingbin (author), Sun, Zhenping (author), Yanliang, Ji (author), Li, Biyun (author), Pang, Min (author)
As an internal curing material, superabsorbent polymers (SAPs) can effectively reduce the risk of volume shrinkage of cement-based materials. By preparing the cement paste mixed with SAPs, the amount of pre-absorbed water and the water-cement ratio of paste on the water absorption-release behavior in the fresh cement paste were studied by using...
conference paper 2021
document
Ying, Shen (author), Guo, Renzhong (author), Li, Weiyang (author), Yang, Jie (author), Zhao, Zhigang (author), Li, Lin (author)
There are many 3D objects with denser aggregation that they are fully/partly coherent touched with each other through shared facets, which we called coherent set of 3D objects. Visualization for 3D property unit is an effective way to understand 3D spatial occupation, location and relationship in urban space, particularly in the coherent set of...
conference paper 2016
document
Zlatanova, Sisi (author), Li, Ki-Joune (author), Lemmen, Christiaan (author), van Oosterom, Peter (author)
In this paper we investigate the possible synergy between two different but related standards: OGC’s IndoorGML and ISO TC211’s LADM. Both (can) deal with 3D spaces with properties, constraints and associations attached and both can operate with abstract notations of space. But there are also differences, e.g. LADM is a conceptual model, while...
conference paper 2016
document
Guo, R. (author), Ying, S. (author), Li, L. (author), Luo, P. (author), Van Oosterom, P.J.M. (author)
conference paper 2011
document
Li, Ye (author)
conference paper 2006
document
Li, C. (author), Rusak, Z. (author), Horvath, I. (author), Ji, L. (author), Hou, Y. (author)
In the last two decades, robotics-assisted stroke reha-bilitation has been wide-spread, in particular for movement rehabilitation of upper limbs. Several studies have reported on the clinical effectiveness of this kind of therapy. The results of these studies show that robot assisted therapy can be more effective in recovering motor control...
conference paper 2014
document
Chen, Z. (author), Xu, Z. (author), Wang, G. (author), Li, H. (author), Chen, B. (author), Zeng, X.C. (author), Tan, L. (author)
Crystalline solids are solid materials whose constituent atoms, molecules, or ions are arranged in a highly regulated fashion. Due to lack of rotational freedom in their stacking, they have been known as fragile materials. Even though some efforts have been dedicated to bind or mend defects/cracks in amorphous materials like concrete or polymers...
conference paper 2013
Searched for: +
(61 - 80 of 331)

Pages