- document
-
Nedeljković, Marija (author), Visser, Jeanette (author), Nijland, Timo G. (author), Valcke, Siska (author), Schlangen, E. (author)In the Netherlands, beside cement replacement with more green cement types, there is also an urgent need for alternative materials for natural sand in new concrete in order to make it circular. Furthermore, the recyclers have raised questions regarding upscaling and the potential of fine recycled concrete aggregates (fRCA) in structural concrete...conference paper 2021
- document
-
Romero Rodriguez, C. (author), Ye, R. (author), Varveri, Aikaterini (author), Rossi, E. (author), Anglani, Giovanni (author), Antonaci, Paola (author), Schlangen, E. (author), Šavija, B. (author)Coupling of carbonation and chlorides ingress mechanisms is very common in concrete under certain exposure conditions such as coastal environments. The aggravation/ mitigation of corrosion by the existence of carbonation lies on the fact that microstructural changes due to carbonation result in changes on the transport properties of the material...conference paper 2021
- document
-
Zhang, H. (author), Schlangen, E. (author), Ge, Zhi (author), Šavija, B. (author)Properties of concrete are, to a large extent, dependent on the properties of its binding constituent, hydrated cement paste. Therefore, knowledge of properties of hydrated cement paste is crucial for predicting concrete behaviour. This paper presents an experimentally informed approach for modelling elastic and transport properties of cement...conference paper 2021
- document
-
Xu, S. (author), Liu, X. (author), Tabakovic, A. (author), Schlangen, E. (author)Microwave heating has been shown to be an effective method of heating asphalt concrete and in turn healing the damage. As such, microwave heating holds great potential in rapid (1–3 min) and effective damage healing, resulting in improvement in the service life, safety, and sustainability of asphalt pavement. This study focused on the microwave...journal article 2021
- document
-
Zhang, Hongzhi (author), Yuan, Huaqiang (author), Ge, Zhi (author), Wu, Jiajie (author), Fang, Cheng (author), Schlangen, E. (author), Šavija, B. (author)Clay brick is one of the major components of demolition waste, which is generally landfilled. Effective and new uses of recycled clay brick may provide sustainability benefits in terms of landfill reduction. Therefore, this research aims at applying Recycled fine clay brick aggregates (RFCBA) with sizes from 0.075 mm–4.75 mm to prepare Self...journal article 2021
- document
-
Bhattacherjee, Shantanu (author), Basavaraj, Anusha S. (author), Rahul, A. V. (author), Santhanam, Manu (author), Gettu, Ravindra (author), Schlangen, E. (author), Chen, Y. (author), Copuroglu, Oguzhan (author), Wang, Li (author)This paper explores the sustainability aspects of binders used in concrete 3D concrete printing. Firstly, a prospective approach to conduct sustainability-assessment based on the life cycle of 3D printed structures is presented, which also highlights the importance of considering the functional requirements of the mixes used for 3D printing....journal article 2021
- document
-
França de Mendonça Filho, F. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Šavija, B. (author)X-ray computer scanning tomography (CT scan) is an increasingly more available technique, which has been applied to material sciences for years. Although most of its use is qualitative for gaining insights on material behavior, quantitative analysis for estimations of deterioration rates is possible. This paper describes an unbiased,...journal article 2021
- document
-
Nedeljković, Marija (author), Visser, Jeanette (author), Nijland, Timo G. (author), Valcke, Siska (author), Schlangen, E. (author)In circular concrete design, beside cement replacement with more environmentally friendly cement types, there is also an urgent need for sand replacement with fine recycled concrete aggregates (fRCA). The variations in physical and chemical properties of fRCA and lack of standards for their quality evaluation are the main reasons for not yet...journal article 2021
- document
-
Xu, S. (author), Liu, X. (author), Tabakovic, A. (author), Schlangen, E. (author)Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO<sub>2</sub> emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and...journal article 2021
- document
-
Gan, Y. (author), Vandamme, Matthieu (author), Chen, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This paper presents an experimental investigation on the short-term creep recovery of cement paste at micrometre length scale. Micro-cantilever beams were fabricated and tested with 8 different loading series using the nanoindenter. It is found that cement pastes show high recovery ratios (>80%) even subjected to very high stress levels....journal article 2021
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)In this study, a numerical model using a 2D lattice network is developed to investigate the fatigue behaviour of cement paste at the microscale. Images of 2D microstructures of cement pastes obtained from XCT tests are used as inputs and mapped to the lattice model. Different local mechanical and fatigue properties are assigned to different...journal article 2021
- document
-
Chang, Z. (author), Xu, Y. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)In this work, the lattice model is applied to study the printing process and quantify the buildability (i.e., the maximum height that can be printed) for 3D concrete printing (3DCP). The model simulates structural failure by incorporating an element birth technique, time-dependent stiffness and strength, printing velocity, non-uniform...journal article 2021
- document
-
Chen, Zhipei (author), Koleva, D.A. (author), Schlangen, E. (author)The focus of this work is to present test results on the bond of steel-mortar interface undergoing stray current. The bond strength, derived by pull-out tests, is correlated to the electrochemical response of the steel rebar and the properties of the mortar bulk matrix. The effects of curing regimes (in terms of duration of curing) and...journal article 2021
- document
-
Nedeljković, Marija (author), Mylonas, Akis (author), Wiktor, Virginie (author), Schlangen, E. (author), Visser, Jeanette (author)Fine recycled concrete aggregates (fRCA, 0–4 mm) are produced from demolished concrete structures and consist of natural aggregates and old cement mortar. The presence of old cement mortar has detrimental effect on the fresh properties and strength of new concrete. This study aims to investigate the working mechanism and effectiveness of...journal article 2021
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Zhang, Y. (author), Xu, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study presents an experimental investigation of fatigue properties of cement paste at the microscale. A strong size dependence is found for the flexural fatigue life of the cement paste specimen. Microscopic observations on the fractured surfaces suggest that there is a higher density of nano-scale cracks generated during the fatigue...journal article 2021
- document
-
Chen, Y. (author), He, S. (author), Zhang, Y. (author), Wan, Z. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)This paper aims to investigate the influences of high Portland cement substitutions (>60 wt%) by low-grade calcined clay (CC) and limestone (LF) on 3D concrete printability, stiffness evolution and early-age hydration. Results show that, with the same dosage of admixtures (superplasticizer and viscosity modifier), increasing LF and CC...journal article 2021
- document
-
Nedeljković, Marija (author), Visser, Jeanette (author), Šavija, B. (author), Valcke, Siska (author), Schlangen, E. (author)This paper discusses the state-of-the-art of the fine recycled concrete aggregates (fRCA), focusing on their physical and chemical properties, engineering properties and durability of concretes with fRCA. Based on the systematic review of the published literature, it is impossible to deduce without any further research the guidelines and...review 2021
- document
-
Xu, S. (author), Liu, X. (author), Tabakovic, A. (author), Lin, P. (author), Zhang, Y. (author), Nahar, S. (author), Lommerts, B. J. (author), Schlangen, E. (author)Rejuvenator encapsulation technique showed great potential for extrinsic asphalt pavement damage healing. Once the capsules are embedded within asphalt pavement, the healing is activated on-demand via progressing microcrack. When the microcrack encounters the capsule, the fracture energy at the tip opens the capsule and releases the...journal article 2021
- document
-
Gao, Peng (author), Chen, Yang (author), Huang, Haoliang (author), Qian, Zhiwei (author), Schlangen, E. (author), Wei, Jiangxiong (author), Yu, Qijun (author)Non-uniform stresses, strains and microcracking of the concretes with three coarse aggregate sizes (5–10 mm, 10–16 mm, 16–20 mm) dried under 40% relative humidity (RH) for 60 days were quantified using digital image correlation and lattice fracture modelling. The influencing mechanism of coarse aggregate size on the drying-induced...journal article 2021
- document
-
Aimi, M. A.Raden Maizatul (author), Hamidah, M. S. (author), Kartini, K. (author), Hana, H. Noor (author), Khalilah, A. K. (author), Schlangen, E. (author)Autonomous healing by the microbially induced calcite precipitation (MICP) mechanism has garnered significant interest in the sustainable approach to concrete repair and maintenance. Previous research works have reported that Bacillus pasteurii and Bacillus sphaericus are the most commonly used in concrete associated with bacteria. However,...journal article 2021