Searched for: author%3A%22Benedictus%2C+R.%22
(1 - 20 of 31)

Pages

List view
Grid view
document
Eleftheroglou, N. (author), Zarouchas, D. (author), Loutas, Theodoros (author), Mansouri, Sina Sharif (author), Georgoulas, George (author), Karvelis, Petros (author), Nikolakopoulos, George (author), Benedictus, R. (author)
This paper examines diagnostics and prognostics of Lithium-Polymer (Li-Po) batteries for unmanned aerial vehicles (UAVs). Several discharge voltage histories obtained during actual indoor flights constitute the training data for a data-driven approach, utilizing the Non-Homogenous Hidden Semi Markov model (NHHSMM). NHHSMM is a suitable candidate...
conference paper 2019
document
Eleftheroglou, N. (author), Zarouchas, D. (author), Benedictus, R. (author)
The procedure of fatigue damage accumulation in composite structures is still unknown and depends on several parameters such as type and frequency of loading, stacking sequence and material properties. Additionally, the nonhomogeneous and anisotropic nature of composites result to a stochastic activation of the different failure mechanisms and...
conference paper 2019
document
Broer, Agnes A.R. (author), Yue, N. (author), Galanopoulos, Georgios (author), Benedictus, R. (author), Loutas, Theodoros (author), Zarouchas, D. (author)
Health management methodologies for condition-based maintenance are often developed using sensor data collected during experimental tests. Most tests performed in laboratories focus on a coupon level or flat panels, while structural component testing is less commonly seen. As researchers, we often consider our experimental tests to be...
conference paper 2022
document
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)
The present work aims at investigating the progressive damage accumulation process of CFRP laminates in an interactive scheme, with a special focus on the early fatigue life where mainly matrix-dominant damage accumulates and stiffness degrades significantly. An in-situ damage monitoring system, containing edge observation, digital image...
conference paper 2022
document
Tapeinos, I. (author), Rajabzadeh, Aydin (author), Zarouchas, D. (author), Groves, R.M. (author), Koussios, S. (author), Benedictus, R. (author)
In the field of cryogenic storage, the medium inside the pressure vessel is in a liquid state and thus is incompressible. Therefore the storage tank should be designed in a way, that makes the best possible use of the available space within an aircraft. A composite-overwrapped pressure vessel (COPV) based on intersecting spheres (multi-sphere)...
conference paper 2018
document
Lavalette, N. (author), Bergsma, O.K. (author), Zarouchas, D. (author), Benedictus, R. (author)
In the context of lightweight structure design for the transportation and robotics industries, new types of composite structures are being developed, in the form of trusses made of fiber-reinforced polymer composite members of small diameter. The main objective of this work is to study adhesive joints, bonding pultruded composite tubes inside...
conference paper 2018
document
Gul, F.C. (author), Moradi, M. (author), Benedictus, R. (author), HADJRIA, RAFIK (author), LUGOVTSOVA, YEVGENIYA (author), Zarouchas, D. (author)
Under in-plane compressive load conditions, the growth of a delamination initially induced by an impact can be followed by a fast growth after a threshold level, which leads to a catastrophic failure in composite structures. To avoid reaching this critical level, it is essential to uncover the delamination size and growth pattern in real time....
conference paper 2023
document
Moradi, M. (author), Gul, F.C. (author), Chiachío, Juan (author), Benedictus, R. (author), Zarouchas, D. (author)
A health indicator (HI) serves as an intermediary link between structural health monitoring (SHM) data and prognostic models, and an efficient HI should meet prognostic criteria, i.e., monotonicity, trendability, and prognosability. However, designing a proper HI for composite structures is a challenging task due to the complex damage...
conference paper 2023
document
Moradi, M. (author), Komninos, P. (author), Benedictus, R. (author), Zarouchas, D. (author)
Recently, companies all over the world have been focusing on the improvement of autonomous health management systems in order to enhance performance and reduce downtime costs. To achieve this, the remaining useful life predictions have been given remarkable attention. These predictions depend on the proper designing process and the quality of...
conference paper 2022
document
Broer, Agnes A.R. (author), Yue, N. (author), Galanopoulos, Georgios (author), Benedictus, R. (author), Loutas, Theodoros (author), Zarouchas, D. (author)
To move towards a condition-based maintenance practice for aircraft structures, design of reliable health management methodologies is required. Development of diagnostic methodologies is commonly realised on simplified sample structures with assumptions that methodologies can be adapted for application to realistic aircraft structures under...
conference paper 2023
document
Moradi, M. (author), Broer, Agnes A.R. (author), Chiachío, Juan (author), Benedictus, R. (author), Zarouchas, D. (author)
Health indicators are indices that act as intermediary links between raw SHM data and prognostic models. An efficient HI should satisfy prognostic requirements such as monotonicity, trendability, and prognosability in such a way that it can be effectively used as an input in a prognostic model for remaining useful life estimation. However,...
conference paper 2023
document
Kupski, J.A. (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author), Benedictus, R. (author)
The goal of this study is to investigate new designs of composite bonded joints in order to improve their strength under tensile loading. Multiple stacked overlaps are compared with single overlap designs. The concept of multiple stacking is well known as ply-interleaving technique for co-curing dissimilar materials. For a secondary bonding...
conference paper 2019
document
Broer, Agnes A.R. (author), Galanopoulos, Georgios (author), Zarouchas, D. (author), Loutas, Theodoros (author), Benedictus, R. (author)
A case study is presented in which the first steps are made towards the development of a structural health monitoring (SHM) data fusion framework. For this purpose, a composite single-stiffener panel is subjected to compression-compression fatigue loading (R = 10). The carbon-epoxy panel contains an artificial disbond of 30 mm, which was...
conference paper 2021
document
Li, X. (author), Saeedifar, M. (author), Benedictus, R. (author), Zarouchas, D. (author)
This paper investigates the loading rate effect on both mechanical properties and damage accumulation process of [0°2/90°4]S carbon fiber-polymer laminates under tensile loading. In-situ edge observations, Acoustic Emission and Digital Image Correlation techniques were utilized simultaneously to monitor the state of damage in real time. Results...
journal article 2021
document
Broer, Agnes A.R. (author), Galanopoulos, Georgios (author), Benedictus, R. (author), Loutas, Theodoros (author), Zarouchas, D. (author)
Conducting damage diagnostics on stiffened panels is commonly performed using a single SHM technique. However, each SHM technique has both its strengths and limitations. Rather than straining the expansion of single SHM techniques going beyond their intrinsic capacities, these strengths and limitations should instead be considered in their...
journal article 2021
document
Lavalette, N. (author), Bergsma, O.K. (author), Zarouchas, D. (author), Benedictus, R. (author)
In the context of lightweight structure design for the transportation and robotics industries, new types of composite structures are being developed, in the form of trusses made of fiber-reinforced polymer composite members of small diameter (a few millimeters thick at most). Some concepts of wound trusses can be found in the literature, but...
journal article 2017
document
Xiao, Y. (author), Rans, C.D. (author), Zarouchas, D. (author), Benedictus, R. (author)
Embedding fiber optic sensors (FOSs) within parts for strain measurement is attracting widespread interest due to its great potential in the field of structural health monitoring (SHM). This work proposes a novel method of embedding FOSs using capillaries within solid structures and investigates fiber positions and orientation uncertainties...
journal article 2023
document
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)
Ply-block size and stress level effect on accumulation of transverse cracks and delamination are investigated during early fatigue life of CFRP laminates. Tension-tension fatigue tests under different stress levels were performed for two cross-ply configurations. Edge observation with digital cameras, digital image correlation and acoustic...
journal article 2022
document
Li, X. (author), Kupski, J.A. (author), Teixeira De Freitas, S. (author), Benedictus, R. (author), Zarouchas, D. (author)
This study investigates the early fatigue damage of cross-ply carbon/epoxy laminates. The aim is to unfold the damage accumulation process, understand the interaction between different damage mechanisms, and quantify their contribution to stiffness degradation. Tension-tension fatigue tests were performed, while edge observation and DIC...
journal article 2020
document
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)
The present work aims at understanding the stochastic matrix crack evolution in CFRP cross-ply laminates under tension–tension fatigue loading. An experimental campaign was carried out on twenty-three specimens at different stress levels, while two optical techniques were used for the in-situ monitoring of the accumulation of transverse...
journal article 2023
Searched for: author%3A%22Benedictus%2C+R.%22
(1 - 20 of 31)

Pages

List view
Grid view