- document
-
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)In this paper, a series of experiments were conducted to systematically and quantitively explore the effects of control factors on the early age properties, i.e., workability and strength of slag and fly ash-based alkali-activated paste (BFS/FA-AAP). The control factors on the workability (flowability and setting time) of BFS/FA-AAP include...journal article 2022
- document
-
Chen, Jing (author), Liu, X. (author), Zeng, Xiao Liang (author), Ye, Huai Yu (author), Zhang, Kouchi (author)Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...journal article 2022
- document
-
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...journal article 2022
- document
-
Ye, G. (author), Fan, X. (author), Zhang, Kouchi (author)In this paper, we presented several practical aspects for building robust and reliable finite element models in thermomechanical modeling in electronics packaging using finite element analysis. Firstly, for layered or patterned structures, a homogenized equivalent model, with equivalent orthotropic material properties, gives excellent...journal article 2022
- document
-
Xu, H. (author), Tian, Zhan (author), Sun, Laixiang (author), Ye, Qinghua (author), Ragno, E. (author), Bricker, J.D. (author), Tan, Jinkai (author), Ke, Q. (author), Wang, Shuai (author)Compound flooding is generated when two or more flood drivers occur simultaneously or in close succession. Multiple drivers can amplify each other and lead to greater impacts than when they occur in isolation. A better understanding of the interdependence between flood drivers would facilitate a more accurate assessment of compound flood risk...journal article 2022
- document
-
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)Prediction of alkali silica reaction is still difficult due to the lack of a comprehensive understanding of its chemical fundamentals. In-site experimentally revealing the fundamentals is not realistic as ASR shows over several years or even decades and is affected by many factors. In this paper, by utilizing a 3D reactive-transport...journal article 2022
- document
-
Zhu, Xiuxing (author), Xu, Yingpeng (author), Li, Xiaoyang (author), Hou, Rui (author), Ye, G. (author)The contact stress of flexible joint is an important factor affecting the safety of ultra-short-radius drilling tools. However, calculating the contact stress accurately is difficult, because the method for solving the multibody collision of the flexible joint is complex. A novel analytical method for the contact stress of ball cage flexible...journal article 2022
- document
-
Bellizio, Federica (author), Xu, Wangkun (author), Qiu, Dawei (author), Ye, Yujian (author), Papadaskalopoulos, Dimitrios (author), Cremer, Jochen (author), Teng, Fei (author), Strbac, Goran (author)Digitalization is one of the key drivers for energy system transformation. The advances in communication technologies and measurement devices render available a large amount of operational data and enable the centralization of such data storage and processing. The greater access to data opens up new opportunities for a more efficient and...journal article 2022
- document
-
Tan, C. (author), Wang, S. (author), Li, Shizhen (author), Liu, X. (author), Wei, Jia (author), Zhang, Kouchi (author), Ye, H. (author)Owing to the outstanding physical properties of graphene, its biosensing applications implemented by the terahertz metasurface are widely concerned and studied. Here, we present a novel design of the graphene metasurface, which consists of an individual graphene ring and an H-shaped graphene structure. The graphene metasurface exhibits a dual...journal article 2022
- document
-
Avet, François (author), Li, Xuerun (author), Ben Haha, Mohsen (author), Bernal, Susan A. (author), Bishnoi, Shashank (author), Cizer, Özlem (author), Cyr, Martin (author), Ye, G. (author), Zhang, Shizhe (author)The results of phase 1 of an interlaboratory test, coordinated by the RILEM TC 267-TRM “Tests for Reactivity of Supplementary Cementitious Materials” showed that the R<sup>3</sup> (rapid, relevant, reliable) test method, by measurement of heat release or bound water, provided the most reliable and relevant determination of the chemical...journal article 2022
- document
-
Gao, Peng (author), Ye, G. (author), Huang, Haoliang (author), Qian, Zhiwei (author), Schlangen, E. (author), Wei, Jiangxiong (author), Yu, Qijun (author)A structure-based modelling framework was established to simulate the three-dimensional autogenous shrinkage of cement paste. A cement hydration model, HYMOSTRUC3D-E, was used to obtain the microstructures and ionic concentrations of the cement paste. A lattice fracture model based on the effective stress and effective modulus was used to...journal article 2022
- document
-
Sherzer, G. Lifshitz (author), Ye, G. (author), Schlangen, E. (author), Kovler, K. (author)It has been observed that a trench wall embedded in the soil of the Dead Sea has lost strength and is deteriorating due to brine attack. This phenomenon demonstrates that concrete wall structural stability and durability can be seriously endangered. Yet conventional analysis using macroscopic models is considered an oversimplification, as it...journal article 2022
- document
-
Li, Shizhen (author), Liu, X. (author), Fan, Jiajie (author), Tan, C. (author), Wang, S. (author), Xie, Bin (author), Ye, H. (author)The wide-bandgap semiconductors represented by GaN have a broad application prospect because of their high service temperature and high switch frequency. Quad-Flat-No-Lead (QFN) Package is currently one of the mainstream packaging methods due to its low cost and high efficiency. However, the low reliability of QFN used in GaN devices is still...conference paper 2022
- document
-
Wang, Xiao Lin (author), Zhong, Yuanguang (author), Li, L. (author), Xie, Wei (author), Ye, Zhi Sheng (author)Problem definition: Warranty reserves are funds used to fulfill future warranty obligations for a product. In this paper, we investigate the warranty reserve planning problem faced by a manufacturing firm who manages warranties for multiple products. Academic/practical relevance: It is nontrivial to determine a proper amount of reserves to...journal article 2022
- document
-
Li, Z. (author), Liang, X. (author), Liu, C. (author), Liang, M. (author), van Breugel, K. (author), Ye, G. (author)This study investigates the deformation of free and stress of restrained alkali-activated slag concrete (AASC), respectively, under semi-adiabatic condition. The concrete shows first thermal expansion, which is compensated soon by autogenous shrinkage. The subsequent cooling down of the concrete aggravates shrinkage and development of tensile...journal article 2022
- document
-
Ye, Guigen (author), Fan, X. (author), Middelburg, L.M. (author), el Mansouri, B. (author), Poelma, René H. (author), Zhang, Kouchi (author)In this paper, stability and mechanistic simulations for a four-beam-mass-based MEMS gravimeter were conducted, and guidelines for the gravimeter design were proposed. Based on a prototyped MEMS device, the nonlinear finite element model was validated first against the experimental results. Then, we demonstrated three different scenarios in...journal article 2022
- document
-
Sun, Yubo (author), Tao, Yaxin (author), Rahul, A. V. (author), Ye, G. (author), De Schutter, Geert (author)The rapid workability loss of alkali-activated materials (AAM) has been a major obstacle limiting its onsite application. In this study, two conventional SPs (made of polynaphthalene sulfonate (PNS) and lignosulfonate (LS) salts), which have been reported to be effective in some specific AAM mixtures were separately applied in alkali...journal article 2022
- document
-
Zuo, Y. (author), Ye, G. (author)For the first time, this study developed a novel model, named GeoMicro3D, to simulate the reaction process and microstructure formation of alkali-activated slag. The GeoMicro3D model consists of four modules that are designed to simulate, respectively: (i) the initial spatial distribution of real-shape slag particles in alkaline activator, ...journal article 2021
- document
-
Li, Z. (author), Lu, T. (author), Chen, Y. (author), Wu, B. (author), Ye, G. (author)This study aims to predict the autogenous shrinkage of alkali-activated concrete (AAC) based on slag and fly ash. A variety of analytical and numerical models are available for the prediction of autogenous shrinkage of ordinary Portland cement (OPC) concrete, but these models are found to show dramatic discrepancies when applied for AAC due...journal article 2021
- document
-
Ye, Qing Chuan (author), Rhuggenaath, Jason. S. (author), Zhang, Yingqian (author), Verwer, S.E. (author), Hilgeman, Michiel Jurgen (author)Designing auction parameters for online industrial auctions is a complex problem due to highly heterogeneous items. Currently, online auctioneers rely heavily on their experts in auction design. The ability of predicting how well an auction will perform prior to the start comes in handy for auctioneers. If an item is expected to be a low...journal article 2021