Searched for: collection%253Air
(1 - 20 of 1,595)

Pages

document
Li, Y. (author)
Improving the efficiency in deploying deep neural networks (DNNs) and processing complex high-dimensional data has drawn increasing attention in recent years. Yet, the deployment of large DNN models is challenged by the high computational complexity and energy consumption, making it difficult to run on resource-constrained devices such as mobile...
doctoral thesis 2024
document
Li, Z. (author)
Over many decades, intensive studies have been performed towards safe and sustainable substitutes for chromate corrosion inhibitors in active corrosion protection coatings for aerospace aluminium alloys. The proposed candidates must provide similar corrosion protection as compared to that of chromate-based compounds and be cost-effective for...
doctoral thesis 2024
document
Li, H. (author)
Electronic devices have permeated into all aspects of our lives, from basic smart cards to sophisticated hybrid automobile systems. These devices comprise a range of products like sensors, wearable gadgets, mobile phones, personal computers, and others, playing vital roles in many applications and enabling the Internet of Things (IoT). However,...
doctoral thesis 2024
document
Li, J. (author)
Around 10% of the population will have to go through a catheterization procedure for the treatment of a cardiovascular disease at a certain stage of their lives. During such a procedure, smart catheters will be the "eyes and ears" of the surgeons, significantly improving the diagnosis and treatment. However, there have been very limited...
doctoral thesis 2024
document
Dai, Zhicheng (author), Li, Dewei (author), Feng, Y. (author), Yang, Yuming (author), Sun, Long (author)
Understanding pedestrian wayfinding behavior is crucial for traffic management and building design. The use of virtual reality technology presents an efficient approach for investigating pedestrian wayfinding behavior in large public spaces, offering numerous advantages for data collection. However, the impact of different scenario dimensions on...
journal article 2024
document
Li, G. (author), Li, Zirui (author), Knoop, V.L. (author), van Lint, J.W.C. (author)
Predicting the trajectories of road agents is fundamental for self-driving cars. Trajectory prediction contains many sources of uncertainty in data and modelling. A thorough understanding of this uncertainty is crucial in a safety-critical task like auto-piloting a vehicle. In practice, it is necessary to distinguish between the uncertainty...
journal article 2024
document
Li, Wenyu (author), Chen, Wei (author), Jiang, Jing (author), Wang, Wenbo (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, Jiajie (author)
Thermal management has always played a significant role in power module design. Double-sided heat dissipation is more efficient at transferring heat than the traditional package. Although there are several thermal modeling approaches to power modules, the application of the numerical models, which are computationally fast and accurate, has...
conference paper 2024
document
Li, Shizhen (author), Liu, X. (author), Gao, Chenshan (author), Wang, S. (author), Li, Jun (author), Ye, Huaiyu (author), Zhang, Kouchi (author), Wu, Shaohui (author)
The significance of wafer bonding is fundamental to the progression of electronic systems. Common fabrication techniques for Cu pillars play a crucial role in establishing resilient and efficient interconnects within semiconductor devices. It is imperative to explore the potential of nano-copper as an alternative material to overcome limitations...
conference paper 2024
document
Wu, J. (author), Li, S. (author), Fu, A. (author), Cvetkovic, M. (author), Palensky, P. (author), Vasquez, Juan C. (author), Guerrero, Josep M. (author)
The increasing proportion of renewable energy introduces both long-term and short-term uncertainty to power systems, which restricts the implementation of energy management systems (EMSs) with high dependency on accurate prediction techniques. A hierarchical online EMS (HEMS) is proposed in this paper to economically operate the Hybrid...
journal article 2024
document
Long, Jianjun (author), Wei, Xuejiao (author), Dong, Yiting (author), Cheng, Xixi (author), Li, Hao (author), Xu, X. (author), Zhu, Minhao (author)
A systematic experimental investigation concerning the fretting-induced tribo-chemical state and its effect on the fretting wear behavior of titanium alloys under the vacuum atmospheres (4 × 10<sup>–3</sup> Pa and 4 × 10<sup>–1</sup> Pa) in different fretting regimes is reported. An in situ XPS analysis tester was developed to capture the...
journal article 2024
document
Cantini, Francesco (author), Creange, Sara (author), Li, Y. (author), van Eijck, L. (author), Kardjilov, Nikolay (author), Kabra, Saurabh (author), Grazzi, Francesco (author)
The evolution of metallurgy is a fundamental aspect related to the knowledge of the technological level of ancient civilizations, for which the information was mostly part of an oral tradition. The ancient, preserved artefacts are the only keepers of this long gone knowledge. Most advanced non-invasive techniques provide us the key to access...
journal article 2024
document
Liu, Guiwen (author), Huang, Ruopeng (author), Li, Kaijian (author), Shrestha, Asheem (author), Wang, H. (author), Cai, Minhong (author)
The renewal of old communities (OCR) is a crucial component of China's urban renewal strategy. However, the huge funding gap, coupled with the unwillingness of enterprises to participate, has impeded the sustainable development of OCR in China. This issue has become a major practical challenge for the government. This study employed the...
journal article 2024
document
Li, J. (author), Vollebregt, S. (author), Zhang, Y. (author), Shekhar, A. (author), May, Alexander (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Due to the deficient passivation of the interface between silicon carbide and silicon dioxide, the defect-induced capture and release of trapped charges triggered by external Bias Temperature Stress (BTS) leads to parameter shifts and degraded device performance. This study models the trap-induced transient current in silicon carbide metal-oxide...
conference paper 2024
document
Liu, Xu (author), Hu, D. (author), Li, Z. (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)
The nano-copper particles are widely used in the sintering processes of packaging wide bandgap semiconductors. Despite the significant success in the industry, the mechanism bridging the sintering process to the mechanical properties of sintered nano-copper is not yet well-modeled. In this paper, the impacts of different sintering temperatures...
conference paper 2024
document
Hu, D. (author), Wang, Chieh (author), Li, Z. (author), Gupta, N. (author), Poelma, René H. (author), Shi, Ziliang (author), Fan, J. (author), Zhang, Kouchi (author)
Driven by the increasing demand for high-power systems, ceramic substrates have received more attention for handling higher power density. Warpage in active metal brazed (AMB) ceramic substrate becomes a critical issue as it can deteriorate the reliability performance. This study comprises three phases, including investigation of the cause of...
conference paper 2024
document
Wu, D. (author), Zhang, R. (author), Pore, Ameya (author), Ha, Xuan Thao (author), Li, Z. (author), Herrera, Fernando (author), Kowalczyk, Wojtek (author), De Momi, Elena (author), Dankelman, J. (author), Kober, J. (author)
Minimally Invasive Procedures (MIPs) emerged as an alternative to more invasive surgical approaches, offering patient benefits such as smaller incisions, less pain, and shorter hospital stay. In one class of MIPs, where natural body lumens or small incisions are used to access deeper anatomical locations, Flexible Surgical and Interventional...
review 2024
document
Li, M. (author), Saedy, S. (author), Fu, S. (author), Stellema, T.P. (author), Kortlever, R. (author), van Ommen, J.R. (author)
Extending the lifetime of electrocatalytic materials is a major challenge in electrocatalysis. Here, we employ atomic layer deposition (ALD) to coat the surface of carbon black supported platinum nanoparticles (Pt/CB) with an ultra-thin layer of silicon dioxide (SiO2) to prevent deactivation of the catalyst during H2 evolution. Our results show...
journal article 2024
document
Zhang, Muchen (author), Li, Zelin (author), Hou, Shuya (author), Deng, Siyu (author), Reniers, G.L.L.M.E. (author), Yang, M. (author), Zhang, Bin (author)
Domino effects are high-impact low-probability events that can have catastrophic consequences. To prevent and to reduce risks related to such events, safety barriers (SBs) are crucial. However, the initiation, propagation, and stopping processes of domino effects are characterized with complexity and uncertainties and hence they are...
journal article 2024
document
Adesanya, Elijah (author), Dabbebi, Rawia (author), Rößler, Christine (author), Pavlin, Majda (author), Li, Z. (author), Luukkonen, Tero (author), Yliniemi, Juho (author), Illikainen, Mirja (author)
Two synthesis pathways (one- and two-part) in alkali-activated binders were compared using ground granulated blast furnace slag (GGBFS), mineral wool (MW) activated using dry and liquid alkali activators with similar Na<sub>2</sub>O/SiO<sub>2</sub> modulus. The effect of activator type on reaction kinetics, strength development, setting times...
journal article 2024
document
Li, Minglei (author), Peng, Shu (author), Nan, L. (author)
We propose a concept of hybrid geometry sets for registering cross-source geometric data. Specifically, our method focuses on the coarse registration of geometric data obtained from laser scanning and photogrammetric reconstruction. Due to different characteristics (e.g., variations in noise levels, density, and scales), achieving accurate...
journal article 2024
Searched for: collection%253Air
(1 - 20 of 1,595)

Pages