Searched for: collection%253Air
(1 - 20 of 27)

Pages

document
Aravind, P.V. (author), Liu, M. (author), Fan, L. (author), Promes, E.J.O. (author), Giraldo, S.Y. (author), Woudstra, T. (author)
An overview of the research activities and on-going multiple projects at Delft University of Technology aimed at the development of Gasifier–Solid Oxide Fuel Cell (SOFC) based power plants are presented. Biosyngas generated in gasifiers consists of a mixture of carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), hydrogen (H2), nitrogen ...
journal article 2013
document
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...
journal article 2022
document
Luo, Runding (author), Hu, D. (author), Qian, Cheng (author), Liu, Xu (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)
Nano-metal materials have received considerable attention because of their promising performance in wide bandgap semiconductor packaging. In this study, molecular dynamics (MD) simulation was performed to simulate the nano-Cu sintering mechanism and the subsequent mechanical behaviors. Hybrid sintering, comprising nanosphere (NS) and...
journal article 2024
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Liang, X. (author), Liu, C. (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Using solid waste to replace limestone filler in asphalt concrete can not only reduce the cost of road construction, but also improve the utilization rate of solid waste. In this study, PHC pile waste concrete (PPWC) was innovatively used to replace limestone filler in asphalt mixture and its effect on the physical and rheological properties...
journal article 2023
document
Liu, Minne (author), Li, Wenyu (author), Chen, Wei (author), Ibrahim, Mesfin S. (author), Xiong, Jingkang (author), Zhang, Kouchi (author), Fan, Jiajie (author)
During the operation of an LED array, its thermal and optical performances are always not equal to the superposition of the individual LED's characteristics because of a significant thermal coupling effect between the arrays. Based on this, this paper proposes an electrical–photo-thermal model, with considering both junction temperature and...
journal article 2024
document
Chen, Wei (author), Liu, Xu (author), Hu, D. (author), Liu, X. (author), Zhu, Xi (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)
During operation in environments containing hydrogen sulfide (H<sub>2</sub>S), such as in offshore and coastal environments, sintered nanoCu in power electronics is susceptible to degradation caused by corrosion. In this study, experimental and molecular dynamics (MD) simulation analyses were conducted to investigate the evolution and...
journal article 2024
document
Huang, Xinxing (author), Li, Yifan (author), Tian, Zhan (author), Ye, Qinghua (author), Ke, Q. (author), Fan, Dongli (author), Mao, Ganquan (author), Chen, Aifang (author), Liu, Junguo (author)
Efficient and accurate streamflow predictions are important for urban water management. Data-driven models, especially neural network (NN) models can predict streamflow fast, while the results are uncertain in some complex river systems. Physically based models can reveal the underlying physics, but it is relatively slow and computationally...
journal article 2021
document
Hu, D. (author), Qian, Cheng (author), Liu, X. (author), Du, L. (author), Sun, Zhongchao (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
As a promising technology for high-power and high-temperature power electronics packaging, nanocopper (nanoCu) paste sintering has recently received increasing attention as a die-attachment. The high-temperature deformation of sintered nanoCu paste and its underlying mechanisms challenge the reliability of high-power electronics packaging. In...
journal article 2023
document
Wang, Xinyue (author), Yang, Zhoudong (author), Wang, Boya (author), Chen, Wei (author), Zhang, Kouchi (author), Zhang, Jing (author), Fan, J. (author), Liu, P. (author)
Power modules applied in offshore applications are facing risks of corrosion failures on die-attach materials due to high humidity and H<sub>2</sub>S exposure. To investigate such corrosion behavior for sintered die-attach materials, we conducted a study with four groups of samples fabricated using copper and silver metal particles under...
journal article 2023
document
Mao, Pengcheng (author), Fan, Huilin (author), Liu, Chang (author), Lan, Gongxu (author), Huang, Wei (author), Li, Zhipeng (author), Amin Hassan, H.M. (author), Zheng, Runguo (author), Wang, Zhiyuan (author), Sun, Hongyu (author), Liu, Yanguo (author)
Thanks to the low cost and earth's abundant potassium resources, potassium ion batteries (PIBs) have attracted much interest as alternative energy storage devices. However, there is still a great challenge to develop suitable anode materials for PIBs with high specific capacity, fast charge/discharge and stable ion storage. Nowadays,...
journal article 2022
document
Yang, Ning (author), Yang, Daoguo (author), Zhang, Kouchi (author), Chen, Liangbiao (author), Liu, Dongjing (author), Cai, Miao (author), Fan, Xuejun (author)
The effects of graphene stacking are investigated by comparing the results of methane adsorption energy, electronic performance, and the doping feasibility of five dopants (i.e., B, N, Al, Si, and P) via first-principles theory. Both zigzag and armchair graphenes are considered. It is found that the zigzag graphene with Bernal stacking has...
journal article 2018
document
Monteiro Fernandes, A.B. (author), Brabandt, Joerg (author), Posdziech, Oliver (author), Saadabadi, S.A. (author), Recalde Moreno Del Rocio, M.D.R. (author), Fan, L. (author), Promes, E.J.O. (author), Liu, M. (author), Woudstra, T. (author), Aravind, P.V. (author)
This paper describes the steps involved in the design, construction, and testing of a gasifier-specific solid oxide fuel cell (SOFC) system. The design choices are based on reported thermodynamic simulation results for the entire gasifier- gas cleanup-SOFC system. The constructed SOFC system is tested and the measured parameters are compared...
journal article 2018
document
Liu, Yang (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, Kouchi (author), Sun, Fenglian (author)
The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...
journal article 2018
document
Zhang, H. (author), Liu, Yang (author), Wang, Lingen (author), Fan, Jiajie (author), Fan, Xuejun (author), Sun, Fenglian (author), Zhang, Kouchi (author)
High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...
journal article 2018
document
Hou, F. (author), Zhang, Hengyun (author), Huang, Dezhu (author), Fan, J. (author), Liu, Fengman (author), Lin, Tingyu (author), Cao, Liqiang (author), Fan, Xuejun (author), Ferreira, Braham (author), Zhang, Kouchi (author)
In this article, a microchannel thermal management system (MTMS) with the two-phase flow using the refrigerant R1234yf with low global warming potential is presented. The thermal test vehicles (TTVs) were made of either single or multiple thermal test chips embedded in the substrates, which were then attached to the MTMS. The system included...
journal article 2020
document
Fan, B. (author), Zhang, K. (author), Liu, Q. (author), Eelkema, R. (author)
Introduction of dynamic thiol-alkynone double addition cross-links in a polymer network enable the formation of a self-healing injectable polymer hydrogel. A four-arm polyethylene glycol (PEG) tetra-thiol star polymer is cross-linked by a small molecule alkynone via the thiol-alkynone double adduct to generate a hydrogel network under ambient...
journal article 2020
document
Ren, S. (author), Liu, X. (author), Lin, P. (author), Wang, H. (author), Fan, W. (author), Erkens, S. (author)
The chemo-rheological properties of crumb rubber modified bitumen are always unstable due to the mutable and uncontrollable swelling-degradation degree of crumb rubber in bitumen matrix. The study aimed at exploring the continuous swelling and degradation behaviors of crumb rubber modified bitumen (CRMB) considering the influence of rubber size...
journal article 2021
document
Li, Mingliang (author), Ren, S. (author), Liu, X. (author), Wu, Zhe (author), Zhang, Haopeng (author), Fan, Weiyu (author), Lin, P. (author), Xu, Jian (author)
This study aims to comprehensively investigate the rejuvenation efficiency of various self-developed compound rejuvenators on the physical, mechanical, and aging properties of aged bitumen, asphalt mortar, and mixture. The results revealed that the restoration capacity of vacuum distilled-oil rejuvenators on high-and-low temperature performance...
journal article 2022
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, Kouchi (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
Searched for: collection%253Air
(1 - 20 of 27)

Pages