- document
-
Koutamanis, A. (author)Planning regulations determine a substantial part of buildings, but their constraints are usually not included in the setup of a BIM model or used explicitly for design guidance, but only tested in compliance checks once a model has been made. This is symptomatic of wider tendencies and ingrained biases that emphasize tacit knowledge and assume...journal article 2024
- document
-
Papachristos, George (author), Papadonikolaki, E. (author), Morgan, Bethan (author)Sociotechnical transitions are mostly seen in the literature as processes where actors and technologies in small niches peripheral to an organizational field, accumulate momentum, scale up, aggregate, and eventually bring about large-scale regime change. Foundational examples include the British transition from sailing ships to steamships and...journal article 2024
- document
-
Gordon, Matthew (author), Batallé Garcia, A. (author), De Wolf, Catherine (author), Sollazzo, Aldo (author), Dubor, Alexandre (author), Wang, T. (author)To address the need for a shift from a linear to a circular economy in the built environment, this paper develops a semi-automated assistive process for planning building material deconstruction for reuse using sensing and scanning, Scan-to-BIM, and computer vision techniques. These methods are applied and tested in a real-world case study in...journal article 2023
- document
-
Feringa, J. (author)The presented research addresses the question of how to bridge the divide between academic research and industry in the domain of by investigating aspects of computational design , robotic fabrication and their impact on practice via a series of experiments and case studies. Research sub-questions related to the architectural model , geometry...doctoral thesis 2022
- document
-
Peng, Panyu (author), Ao, Yibin (author), Li, Mingyang (author), Wang, Yan (author), Wang, T. (author), Bahmani, Homa (author)With the popularization and application of Building Information Modeling (BIM), the demand for BIM technical talents in the construction industry is increasing. Exploring college students’ BIM technical learning behavior is of great practical significance to improve education activities. Based on the Unified Theory of Acceptance and Use of...journal article 2022
- document
-
Ao, Yibin (author), Peng, Panyu (author), Li, Jiayue (author), Bahmani, Homa (author), Wang, T. (author)Building Information Modeling (BIM) has become the development trend in the architecture, engineering, and construction (AEC) industry. BIM discipline competition is an effective way for students of AEC-related disciplines to integrate theory with practice, and it is a key link to cultivate qualified BIM practitioners. This study takes...journal article 2022
- document
-
Guler, Dogus (author), Alattas, A.F.M. (author), Broekhuizen, Marjan (author), Kalogianni, E. (author), Kara, A. (author), van Oosterom, P.J.M. (author)Τhe built environment has a vast and ever-growing number of complex and multi-layered buildings and other structures. The number of those is growing because of the increasing pressure on the limited space in cities. It is important to note that different professional sectors are involved in the realization of a new building. These sectors are...conference paper 2022
- document
-
Noardo, F. (author), Guler, Dogus (author), Fauth, Judith (author), Malacarne, Giada (author), Mastrolembo Ventura, Silvia (author), Azenha, Miguel (author), Olsson, Per Ola (author), Senger, Lennart (author)Growing interest is awarded to the digitalization of the building permitting use case and many works are developed about the topic. However, the subject is very complex and many aspects are usually tackled separately, making it very hard for traditional literature reviews to grasp the actual progress in the overall topic. This paper unveils...review 2022
- document
-
Krijnen, T.F. (author), Noardo, F. (author), Arroyo Ohori, G.A.K. (author), Stoter, J.E. (author)In this chapter, we start from the typical concepts from Geographic Information System (GIS): data representation, acquisition, querying and analysis. We follow with the transition from 2 to 3D GIS and describe open standards such as CityGML and CityJSON and recent advances on 3D geospatial simulations, computing and real-time GIS and...book chapter 2022
- document
-
Noardo, F. (author), Wu, T. (author), Arroyo Ohori, G.A.K. (author), Krijnen, T.F. (author), Stoter, J.E. (author)To support building permit issuing with automatic digital tools, the reuse of models produced by designers would make the process quicker and more objective. However, current studies and pilots often leave a gap with respect to the models as actually provided by architects, having varying quality and content. In this study, rather than taking...journal article 2022
- document
- Bruggeman, E.M. (author) book 2022
- document
-
Alattas, A.F.M. (author), Kalogianni, E. (author), Alzahrani, Thamer (author), Zlatanova, Sisi (author), van Oosterom, P.J.M. (author)This paper presents in detail the legislation and regulation related to the use and ownership of building complexes with multiple units (apartments, condominiums) in Saudi Arabia for the 3D registration of the legal spaces. The 3D Land Administration Domain Model (LADM)country profile for Saudi Arabia must be able to represent the identified...journal article 2021
- document
-
Krijnen, T.F. (author), El-Diraby, Tamer (author), Konomi, Theohar (author), Attalla, Ahmed (author)Multi-disciplinary three-dimensional representations of building designs are available in BIM. However, thermal analysis often remains a manual task due to disparities in modelling: In IFC, buildings are decomposed into sets of elements with individual solid volumes. Thermal analysis requires interfaces between pairs of adjacent spaces.<br/>In...conference paper 2021
- document
-
Hesselink, Geert (author), Krijnen, T.F. (author), Pannekoek, Geert (author)In this paper, we discuss an automated procedure to automatically analyse and extract domain specific construction information from IFC building models. More specifically, we were interested in extracting location potential placement sites for thermal bridges between balconies and their neighbouring floors. For this aim, we developed a web-based...conference paper 2021
- document
-
Berlo, Léon van (author), Krijnen, T.F. (author), Tauscher, Helga (author), Liebich, Thomas (author), Kranenburg, Arie van (author), Paasiala, Pasi (author)The buildingSMART Technical Roadmap, published in April 2020, was the start of multiple modernization efforts for buildingSMART Solutions and Standards. The modernization, modularization, and normalization of the Industry Foundation Classes (IFC) is one of the priorities. A taskforce has been working on restructuring the core of IFC for the IFC...conference paper 2021
- document
-
Luttun, Johan (author), Krijnen, T.F. (author)Recent progress in computer vision and the pervasive use of Building Information Models (BIM) in the construction industry provide countless opportunities for decision making in architectural design. It allows capturing real-world geometrical data for assessing design options, such as windows products for replacement on the façade of an existing...conference paper 2021
- document
-
Ramlakhan, R.J.K. (author), Kalogianni, E. (author), van Oosterom, P.J.M. (author)Two dimensional (2D) Land Administration Systems (LASs) do not adequately represent 3D underground objects. It is not easy to identify the owners of these objects and the relations between objects below and above the surface are not explicitly provided. A 3D LAS can however facilitate a better understanding, as well as a more efficient...conference paper 2021
- document
-
Kalogianni, E. (author), Floros, G. S. (author), Dimopoulou, E. (author)Precise and detailed information for infrastructure assets, as well as information about the property interests attached to them are crucial to prevent unnecessary costs, disruptions, and delays when planning, constructing, and managing such objects. Various models encapsulating infrastructure objects information are available, mostly during...journal article 2021
- document
-
Noardo, F. (author), Arroyo Ohori, G.A.K. (author), Krijnen, T.F. (author), Stoter, J.E. (author)Industry Foundation Classes (IFC) is a complete, wide and complex open standard data model to represent Building Information Models. Big efforts are being made by the standardization organization buildingSMART, to develop and maintain this standard in collaboration with researchers, companies and institutions. However, when trying to use IFC...journal article 2021
- document
-
Koutamanis, A. (author)The paper examines proposals for nD BIM with respect to what may be considered a dimension and how dimensions relate to information in a symbolic representation. It establishes that ‘dimension’ is often used metaphorically to indicate information-processing capacities – an unfortunate usage in an area where the term is used literally. The...review 2020