Investigation of the first quasi-rectangular metro tunnel constructed by the 0−θ method

Quasi-rectangular shield tunneling is a cutting-edge trenchless method for constructing metro tunnels with double tubes, owing to its advantages in saving underground space and reducing ground disturbance. However, the conventional quasi-rectangular shield tunneling method is not applicable when constructing a tunnel without a center pillar,...

Electron-Irradiation-Induced Degradation of Transfer Characteristics in Super-Junction VDMOSFET

High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...

An investigation on the fatigue performance of cracked steel plates reinforced with FRP and stop hole

In this paper, we implement the combined method of drilling stop hole and FRP reinforcement to repair cracked steel plates subjected to cyclic tension. The crack initiation and growth are experimentally investigated. The stress distribution at the stop hole and the residual fatigue life are evaluated by the FEM. The effects on prolonging...

Aqueous chemoenzymatic one-pot enantioselective synthesis of tertiary α-aryl cycloketonesviaPd-catalyzed C-C formation and enzymatic C=C asymmetric hydrogenation

An aqueous chemoenzymatic cascade reaction combining Pd-catalyzed C-C formation and enzymatic C=C asymmetric hydrogenation (AH) was developed for enantioselective synthesis of tertiary α-aryl cycloketones in good yields and excellent enantioselectivities. The stereopreference of the enzyme in AH of α-aryl cyclohexenones was studied. An...

Degradation behaviors and in-vivo biocompatibility of a rare earth- and aluminum-free magnesium-based stent

Biodegradable stents can provide scaffolding and anti-restenosis benefits in the short term and then gradually disappear over time to free the vessel, among which the Mg-based biodegradable metal stents have been prosperously developed. In the present study, a Mg-8.5Li (wt.%) alloy (RE- and Al-free) with high ductility (> 40%) was...

Fault diagnosis of the 10MW Floating Offshore Wind Turbine benchmark: A mixed model and signal-based approach

Floating Offshore Wind Turbines (FOWTs) operate in the harsh marine environment with limited accessibility and maintainability. Not only failures are more likely to occur than in land-based turbines, but also corrective maintenance is more expensive. In the present study, a mixed model and signal-based Fault Diagnosis (FD) architecture is...

Numerical investigation on the surface crack growth in FRP-reinforced steel plates subjected to tension

In this paper, we analyse the surface crack growth in the Fibre-Reinforced Polymer (FRP) reinforced steel plates subjected to tension by means of the finite element (FE) method. Following the experimental study, a three-dimensional FE model is developed to evaluate the Stress Intensity Factor (SIF) of the surface crack, and the crack growth...

Experimental investigation on FRP-reinforced surface cracked steel plates subjected to cyclic tension

Surface cracked steel plates reinforced with single-side Fiber-Reinforced Polymer (FRP) subjected to cyclic tension are experimental studied. The main purpose is to analyze the effect of FRP reinforcement on the crack growth. The failure modes and their effects are analyzed as well. Given the single-side reinforcement, reinforcing the cracked...

External surface cracked offshore steel pipes reinforced with composite repair system subjected to cyclic bending: An experimental investigation

In this paper, we experimentally studied the external surface crack growth in steel pipes reinforced with Composite System Repaired (CRS). CRS reinforced surface cracked API 5L X65 pipes were tested, containing three initial notch sizes and four reinforcement schemes. During the tests, the crack growth results, as well as the strain on the...

An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending

In the present paper, we propose an analytical method to calculate the Stress Intensity Factor (SIF) of circumferential surface cracks in steel pipes subjected to bending. In light of pipe geometry and bending load case, the analytical formula is raised by introducing new bending correction factors and new geometry correction factors on the...

Crack monitoring method for an FRP-strengthened steel structure based on an antenna sensor

Fiber-reinforced polymer (FRP) has been increasingly applied to steel structures for structural strengthening or crack repair, given its high strength-to-weight ratio and high stiffness-to-weight ratio. Cracks in steel structures are the dominant hidden threats to structural safety. However, it is difficult to monitor structural cracks under...