Searched for: collection%253Air
(1 - 20 of 51)

Pages

document
D'Aguanno, A. (author), González Romero, A. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
Hammerhead launcher configurations, characterized by a larger diameter in the payload fairing than the rest of the launch vehicle, face substantial challenges during transonic operations due to their susceptibility to flow separation and intense pressure fluctuations. This experimental study investigates the influence of the nose and boat-tail...
conference paper 2024
document
Laguarda, L. (author), Hickel, S. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
Wall-resolved large-eddy simulations (LES) are carried out to investigate the aeroelastic coupling between a Mach 2.0 impinging shock-wave/turbulent boundary-layer interaction (STBLI) and a flexible thin-panel. After the initial transient, the panel exhibits self-sustained oscillatory behavior with varying oscillation amplitude, confirming the...
conference paper 2023
document
van Oudheusden, A.A. (author), Buijserd, A.J. (author), Doubrovski, E.L. (author), Flipsen, Bas (author), Faludi, Jeremy (author), Balkenende, R. (author)
Spare parts availability is crucial for extending the life of consumer products. However, long-term availability could lead to high stocks of spare parts, which might not be used. Instead, on-demand manufacturing of spare parts with additive manufacturing (AM) is a promising alternative. This paper presents a method to evaluate parts on their...
conference paper 2023
document
Mertens, C. (author), Sodja, J. (author), Sciacchitano, A. (author), van Oudheusden, B.W. (author)
The aeroelastic response of a very flexible wing in steady and unsteady inflow conditions is measured in a wind tunnel experiment. An integrated aeroelastic characterization is performed with a non-intrusive optical setup that allows simultaneous measurements of the structural motion and the flow field around the wing. The experimental...
conference paper 2022
document
Dacome, G. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
The current study considers the configuration of a transverse jet in a supersonic crossflow that is interacting with an impinging oblique shock wave. The relevance of this configuration is associated to high-speed air-breathing propulsion systems, where a shock may be induced in the combustion chamber to enhance mixing. To investigate the...
conference paper 2022
document
Carrillo Córcoles, X. (author), Mertens, C. (author), Sciacchitano, A. (author), van Oudheusden, B.W. (author), De Breuker, R. (author), Sodja, J. (author)
An aeroelastic wind tunnel experiment to identify the influence of the wing stiffness and hinge release threshold on the gust load alleviation performance of a folding wingtip design is presented in this study. Five models with different stiffness and tailoring properties are tested and the wing root bending moment at different conditions is...
conference paper 2022
document
D'Aguanno, A. (author), Camps Pons, C. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
In this study the effect of wing sweep on transonic buffet is studied experimentally to reveal the differences between two-dimensional (2D) and three-dimensional (3D) wing configurations. Background oriented schlieren (BOS) and stereographic particle image velocimetry (PIV) have been used as measurement techniques, performing experiments on: an...
conference paper 2022
document
Mertens, C. (author), Costa Fernandez, J.L. (author), Sodja, J. (author), Sciacchitano, A. (author), van Oudheusden, B.W. (author)
The aeroelastic response of a highly flexible wing to periodic gust excitation is determined experimentally. The integrated optical measurement approach that is applied provides combined measurements of the structural response of the wing and the unsteady flow field around it. The aeroelastic loads acting on the wing are derived from these...
conference paper 2022
document
Samenjo, K.T. (author), van Oudheusden, A.A. (author), Bolanos Arriola, J. (author), Flipsen, Bas (author), Faludi, Jeremy (author)
The Sharepair project aims to decrease the waste of electronic and electric consumer products and increase their useful life, by supporting repair communities and scaling up citizen repairs through digital tools. One of the focus areas of this project is to support the discovery or manufacturing of spare parts. With a 3D CAD model of a part and...
conference paper 2022
document
Laguarda, L. (author), Hickel, S. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
We investigate Reynolds number effects in shockwave/turbulent boundary-layer interactions (STBLI) with strong mean flow separation. Three wall-resolved large-eddy simulations (LES) are performed for this purpose, with different Reynolds number but otherwise equal flow parameters and simulation setup. The resulting LES data covers more than a...
conference paper 2022
document
Mertens, C. (author), Costa Fernandez, J.L. (author), Sciacchitano, A. (author), van Oudheusden, B.W. (author), Sodja, J. (author)
The aerodynamic loads on a flexible wing in terms of the surface pressure distribution and the lift force along the span are determined experimentally based on non-intrusive Lagrangian particle tracking (LPT) measurements. As the flexible wing deforms under the aerodynamic loads, its deformed shape is first reconstructed based on structural LPT...
conference paper 2021
document
Mertens, C. (author), de Rojas Cordero, T. (author), Sodja, J. (author), Sciacchitano, A. (author), van Oudheusden, B.W. (author)
The three components in Collar’s triangle of forces (aerodynamic, elastic and inertial) acting on a flexible wing are determined, based on integrated optical measurements of the structural and the aerodynamic response to steady and unsteady periodic inflow conditions. The measurement device is a coaxial volumetric velocimeter mounted on a...
conference paper 2021
document
D'Aguanno, A. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
View Video Presentation: https://doi-org.tudelft.idm.oclc.org/10.2514/6.2021-2558.vid<br/><br/>This experimental study investigates the use of shock control bumps (SCBs) for controlling transonic buffet. Three-dimensional SCBs have been applied on the suction side of an OAT15A supercritical airfoil with the experiments conducted in the transonic...
conference paper 2021
document
Risseeuw, Derek (author), van Oudheusden, B.W. (author), van Zuijlen, A.H. (author), Chourdakis, G. (author)
Flapping wings display complex flows which can be used to generate large lift forces. Flexibility in wings is widely used by natural flyers to increase the aerodynamic performance. The influence of wing flexibility on the flow can be computed using numerical analysis with Fluid Structure Interaction (FSI). The influence of inertial, elastic and...
conference paper 2021
document
van Oudheusden, B.W. (author), Flinkerbusch, Arti (author), Schrijer, F.F.J. (author)
The paper investigates the application of wall porosity for controlling the interaction between an impinging oblique shock wave and a turbulent boundary layer. This type of passive control aims to smear out the shock system in the longitudinal extent, thus inducing a more gradual pressure rise over the shock system with associated decrease of...
conference paper 2019
document
Perçin, M. (author), Yazdanpanah, Mahdi (author), Amiri, Human (author), van de Meerendonk, R. (author), van Oudheusden, B.W. (author)
This study explores the effects of rotational mechanisms on the characteristics of the leading edge vortex (LEV) by comparing translating and revolving flexible wings that are started from rest. Tomographic particle image velocimetry (tomographic-PIV) technique was employed to acquire three-dimensional flow fields for the revolving wings, while...
conference paper 2019
document
D'Aguanno, A. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author)
This paper investigates the appearance, propagation and orientation of upstream travelling waves (UTWs) in transonic buffet. Their role has been studied experimentally on a supercritical airfoil (OAT15A) in the transonic-supersonic wind tunnel of TU Delft at Mach number of 0.7, and an angle of attack of 3.5. In the experiments Background...
conference paper 2019
document
Mitrotta, F.M.A. (author), Sciacchitano, A. (author), Sodja, J. (author), De Breuker, R. (author), van Oudheusden, B.W. (author)
In the present work Robotic Volumetric PIV is applied in a Fluid-Structure Interaction (FSI) investigation. The case studied involves the dynamic response of a flexible aluminium plate subjected to gust excitation. The experiment is carried out in the Open Jet Facility at Delft University of Technology, which is equipped with a gust generator....
conference paper 2019
document
Yazdanpanah, Mahdi (author), Hazaveh, Hooman Amiri (author), Perçin, M. (author), van de Meerendonk, R. (author), van Oudheusden, B.W. (author)
This study explores the effects of rotational mechanisms on the characteristics of the leading edge vortex (LEV) by comparing translating and revolving flexible wings that are started from rest. Tomographic particle image velocimetry (tomographic-PIV) technique was employed to acquire three-dimensional flow fields for the revolving wings, while...
conference paper 2019
document
Heitzig, Dorian (author), van Oudheusden, B.W. (author), Olejnik, D.A. (author), Karasek, M. (author)
This study investigates the wing deformation of a flapping-wing micro air vehicle (MAV) in climbing and forward flight conditions. A measurement setup was developed that maintains adequate viewing axes of the wings for all pitch angles. Recordings of a high-speed camera pair are processed using a point tracking algorithm, allowing 136 points per...
conference paper 2019
Searched for: collection%253Air
(1 - 20 of 51)

Pages