Searched for: collection%253Air
(1 - 20 of 65)

Pages

document
Ruangpan, L. (author), Vojinovic, Zoran (author)
Over recent decades, hydro-meteorological disasters appear to be becoming more intense and frequent. Nature-Based Solutions (NBS) have been introduced to address hydro-meteorological risks as they offer the possibility of working closely with nature. This provides solutions to adapt to future changes in climate and society, as well as to...
book chapter 2022
document
Cardoso, Rafaela (author), Ramon-Tarragona, Anna (author), Lourenço, Sérgio (author), Mendes, João (author), Caruso, Marco (author), Jommi, C. (author)
Monitoring structural behavior of earth structures during construction and in service is a common practice done for safety reasons, consolidation control and maintenance needs. Several are the techniques available for measuring displacements, water pressures and total stresses, not only in these geotechnical structures but also at their...
book chapter 2023
document
Pot, R. (author), Roelse, F.P. (author), Van der Meer, M.T. (author), Nushi, B.R.I. (author), Nelemans, J.P. (author)
The application of the Observational Method can contribute to an economic construction process and effective geotechnical risk management. Current project management practices and control of construction works lead to unfavourable conditions of its application. Throughout the realization of infrastructure, understanding of project risks and...
conference paper 2015
document
Truong-Hong, Linh (author), Lindenbergh, R.C. (author), Woudenberg, Pieter (author), Gard, W.F. (author), van de Kuilen, J.W.G. (author)
Churches are part of heritage structures that take an important role in Europe ́s cultural identity. As such, these structures must be protected to prevent catastrophic collapse and any damage must be reported timely to establish planning to maintenance and restoration. This can be achievable when the churches are monitored periodically with...
conference paper 2021
document
Rukanova, B.D. (author), Tan, Y. (author), Hamerlinck, Robin (author), Heijmann, Frank (author), Ubacht, J. (author)
Circular economy (CE) and sustainability are high on the political agenda of governments nationally and internationally. Governments are developing instruments to stimulate the CE, but without monitoring in place, these measures can be subject to abuse, failing to achieve the desired effects. CE monitoring, however, is still a nascent topic in...
conference paper 2021
document
van Daal-Rombouts, P.M.M. (author), Langeveld, J.G. (author), Clemens, F.H.L.R. (author)
conference paper 2015
document
Ubacht, J. (author), Schmid, Jonathan (author), Rietveld, Elmer (author), Lennartz, Jelmer (author), Rukanova, B.D. (author), Tan, Y. (author)
The European Commission initiated a series of Directives and Regulations that aim to turn the linear economy into a climate-neutral and circular economy. Business-to-government information- sharing arrangements play an essential role in monitoring compliance with these regulatory measures. To this end data from the supply chain of products needs...
conference paper 2023
document
Rukanova, B.D. (author), Ubacht, J. (author), Turner, B. (author), Tan, Y. (author), Schmid, J. (author), Rietveld, E (author)
The United Nations’ Sustainable Development Goals (SDGs) have paved the way toward a more sustainable future. The 2019 EU Green Deal and the 2020 EU Circular Economy Action Plan [1] introduce laws and regulations to facilitate and encourage the transition towards sustainability and a circular economy (CE). For the implementation of these...
conference paper 2023
document
Dalgiç, K.D. (author), Gulen, D. Burcu (author), Acikgoz, Sinan (author), Burd, Harvey (author), Hendriks, M.A.N. (author), Giardina, Giorgia (author), Ilki, Alper (author)
Underground construction activities, such as tunnelling, cause local ground movements to occur. Nearby surface structures interact with the moving ground, potentially leading to building damage. Although it is understood that the severity of building damage is influenced by the façade opening ratio (OpR) and the stiffness of the floors,...
conference paper 2021
document
Cabrall, C.D.D. (author), Janssen, Nico (author), Goncalves, Joel (author), Morando, Alberto (author), Sassman, Matthew (author), de Winter, J.C.F. (author)
Automated driving vehicles of the future will most likely include multiple modes and levels of operation and thus include various transitions of control (ToC) between human and machine. Traditional activation devices (e.g., knobs, switches, buttons, and touchscreens) may be confused by operators among other system setting manipulators and...
conference paper 2016
document
Prisacaru, Alexandru (author), Gromala, Przemyslaw Jakub (author), Jeromio, Mateus Bagetti (author), Han, Bongtae (author), Zhang, Kouchi (author)
Miniaturization of electronics, reduction of time to market and new functionalities in the current context of autonomous driving, electrification and connectivity, are bringing new reliability challenges. Prognostics and Health Management (PHM) can be used effectively to address some of the key challenges, in particular new challenges...
conference paper 2017
document
Gaio, N. (author), Waafi, A. (author), Vlaming, M.L.H. (author), Boschman, E. (author), Dijkstra, P. (author), Nacken, O. (author), Braam, S.R. (author), Boucsein, C. (author), Sarro, Pasqualina M (author), Dekker, R. (author)
This work presents the first multi-well plate that allows for simultaneous mechanical stimulation and electrical monitoring of multiple in-vitro cell cultures in parallel. Each well of the plate is equipped with an Organ-on-Chip (OOC) device consisting of a stretchable micro-electrode array (MEA). For the first time, a film assisted molding ...
conference paper 2018
document
Blanchini, Franco (author), Casagrande, Daniele (author), Giordano, G. (author), Miani, Stefano (author), Olaru, Sorin (author), Reppa, V. (author)
To detect faults in a system we can adopt an observer, designed for the healthy system, and monitor the discrepancy between actual and expected behaviour of the residual (difference between the system output and its estimate). To isolate faults, we can compute the invariant sets associated with each fault, and their projection in the residual...
conference paper 2018
document
Sierra, P.L. (author), Poliotti, M. (author), Yang, Y. (author), Martinez García, Xavier (author), Chacón, Rolando (author)
In this work, dynamic characterization of a simply supported beam is carried out during different steps in a failure load test. The main goal of this work is to evaluate the evolution of the structural dynamic parameters of the beam with different status of damage. Real-scale prestressed concrete beams are tested to investigate its shear...
conference paper 2023
document
Hofman, Wout (author), Rukanova, B.D. (author), Tan, Y. (author), Bharosa, Nitesh (author), Ubacht, J. (author), Rietveld, Elmer (author)
The transition towards a circular economy (CE) will require data sharing across different platforms and data spaces of parties operating in a variety of supply chains. From a circular economy compliance monitoring perspective, beyond the access to mandatory data that governments will receive, authorities may benefit from accessing additional...
conference paper 2024
document
Brackenhoff, J.A. (author)
Monitoring seismic wavefields caused by induced seismicity in the subsurface is a difficult process. Ideally, it requires physical receivers in the subsurface, which is unpractical. Frequently, only measurements at the surface of the Earth are available, which give a limited amount of information about the subsurface. One way to improve the...
doctoral thesis 2021
document
Kofos, A. (author), Ubacht, J. (author), Rukanova, B.D. (author), Korevaar, G. (author), Kouwenhoven, Norbert (author), Tan, Y. (author)
Sustainability is high on the agendas of public and private organizations. Governments are setting targets for reducing the use of virgin raw materials in products and to eliminate waste. To accelerate the transition towards a Circular Economy (CE) policymakers are launching instruments. However, policy instruments, such as financial incentives...
journal article 2022
document
Retike, Inga (author), Bikše, Jānis (author), Kalvāns, Andis (author), Dēliņa, Aija (author), Avotniece, Zanita (author), Zaadnoordijk, Willem (author), Jemeljanova, Marta (author), Popovs, Konrāds (author), Babre, Alise (author), Zelenkevičs, Artjoms (author), Baikovs, Artūrs (author)
Groundwater level time series are of great value for a variety of groundwater studies, particularly for those dealing with the impacts of anthropogenic and climate change. Quality control of groundwater level observations is an essential step prior to any further application, e.g., trend analysis. Often the quality control of data is limited to...
journal article 2022
document
Reinders, K.J. (author), Giardina, Giorgia (author), Zurfluh, Florian (author), Ryser, Jurg (author), Hanssen, R.F. (author)
In the planning stage of new infrastructure or when designing renovation of existing infrastructure, information about existing slope movements or settlements is essential to make informed design decisions. Interferometric<br/>Synthetic Aperture Radar (InSAR) techniques can be of value to identify these risks in an early stage of a project....
journal article 2022
document
Fu, J. (author), Nunez, Alfredo (author), De Schutter, B.H.K. (author)
Natural disasters pose a tremendous risk to the reliability of distribution networks. In this paper, a novel real-time UAV routing strategy for coordination between monitoring and inspection for post-disaster restoration in distribution networks is proposed. With our proposed real-time UAV routing strategy, damages can be inspected by UAVs...
journal article 2022
Searched for: collection%253Air
(1 - 20 of 65)

Pages