Searched for: collection%253Air
(41 - 60 of 141)

Pages

document
Endo, A. (author), Pascual Laguna, A. (author), Hähnle, S.A. (author), Karatsu, K. (author), Thoen, David (author), Murugesan, V. (author), Baselmans, J.J.A. (author)
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance....
conference paper 2020
document
De Klerk, Rick (author), Vegter, Riemer Jakobs K. (author), Goosey-Tolfrey, Vicky L. (author), Mason, Barry S. (author), Lenton, John P. (author), Veeger, H.E.J. (author), van der Woude, L.H.V. (author)
There are many ways to simulate handrim wheelchair propulsion in the laboratory. Ideally, these would be able to, at least mechanically, simulate field conditions. This narrative review provides an overview of the lab-based equipment used in published research and critically assesses their ability to simulate and measure wheelchair propulsion...
journal article 2020
document
Huijten, Esmee (author), Roelvink, Yannick (author), Brackenhoff, Stefanie A. (author), Bakx, Tom J.L.C. (author), Zaalberg, Stan (author), Baselmans, J.J.A. (author), Karatsu, K. (author), van Hoven, M.B. (author), Endo, A. (author)
The next technological breakthrough in millimeter-submillimeter astronomy is 3D imaging spectrometry with wide instantaneous spectral bandwidths and wide fields of view. The total optimization of the focal-plane instrument, the telescope, the observing strategy, and the signal-processing software must enable efficient removal of foreground...
conference paper 2020
document
Augusto da Silva, F. (author), Bagbaba, Ahmet Cagri (author), Hamdioui, S. (author), Sauer, Christian (author)
The development of Integrated Circuits for the Automotive sector imposes on complex challenges. ISO26262 Functional Safety requirements entail extensive Fault Injection campaigns and complex analysis for the evaluation of deployed Software Tools. This paper proposes a methodology to improve Fault Analysis Tools Confidence Level (TCL) by...
conference paper 2020
document
Augusto da Silva, F. (author), Bagbaba, Ahmet Cagri (author), Sartoni, Sandro (author), Cantoro, Riccardo (author), Reorda, Matteo Sonza (author), Hamdioui, S. (author), Sauer, Christian (author)
The development of Integrated Circuits for the Automotive sector imposes on major challenges. ISO26262 compliance, as part of this process, entails complex analysis for the evaluation of potential random hardware faults. This paper proposes a systematic approach to identify faults that do not disrupt safety-critical functionalities and...
conference paper 2020
document
Overtoom, Irene (author), Correia, Gonçalo (author), Huang, Yilin (author), Verbraeck, A. (author)
New developments in the automotive world have the power to change mobility, but because of high uncertainties, municipalities are adopting a wait-and-see attitude. Nonetheless, autonomous, connected and shared vehicle technologies are in a far stage of development and it is only a matter of time before shared autonomous vehicles (SAVs) enter...
journal article 2020
document
Ganni, S. (author), Li, M. (author), Botden, Sanne M.B.I. (author), Nayak, Samir Ranjan (author), Ganni, Bhaskar Rao (author), Rutkowski, Anne Francoise (author), Goossens, R.H.M. (author), Jakimowicz, J.J. (author)
Virtual reality (VR) training is widely used in several minimal invasive surgery (MIS) training curricula for procedural training. However, VR training in its current state lack immersive training environments, such as using head-mounted displays that is implemented in military or aviation training and even entertainment. The virtual...
journal article 2020
document
Petitfrere, Martin (author), Nichita, Dan Vladimir (author), Voskov, D.V. (author), Zaydullin, Rustem (author), Bogdanov, Igor (author)
Several compositional reservoir simulators based on equations of state (EoS) have been designed. Yet, few of them can deal with thermal processes such as steam injection and no fully compositional thermal simulation of the steam injection process has been proposed with extra-heavy oils yet. Those simulations appear essential and will offer...
journal article 2020
document
Cooke, R.M. (author), Marti, Deniz (author), Mazzuchi, Thomas (author)
Post-2006 expert judgment data has been extended to 530 experts assessing 580 calibration variables from their fields. New analysis shows that point predictions as medians of combined expert distributions outperform combined medians, and medians of performance weighted combinations outperform medians of equal weighted combinations. Relative...
journal article 2020
document
Anand, C. (author), Groves, R.M. (author), Shroff, S. (author), Benedictus, R. (author)
In this paper we ultrasonic signals from array transducers are simulated using the Thompson and Gray measurement model. The measurement model consists of a beam model, a system efficiency factor which characterizes the response of the electro-mechanical and electrical components of the system, and a flaw scattering model. To inspect layered...
conference paper 2020
document
Qiu, S. (author), Bozzon, A. (author), Houben, G.J.P.M. (author)
This demo presents VirtualCrowd, a simulation platform for crowdsourcing campaigns. The platform allows the design, configuration, step-by-step execution, and analysis of customized tasks, worker profiles, and crowdsourcing strategies. The platform will be demonstrated through a crowd-mapping example in two cities, which will highlight the...
conference paper 2020
document
van Bilsen, Daniël (author), Huang, Yilin (author), Li, Fen (author)
China is undergoing large changes to tackle carbon dioxide emissions and air pollution. While the top-down governance allows for clear setting of emission reduction targets for industrial sectors and major cities, reducing emissions in residential sectors in smaller (the so-called low-tier) cities remain challenging and often unaddressed. This...
conference paper 2020
document
Britto Maria, Rodrigo (author), de Freitas Leal, Marcus (author), Sousa Junior, Edgard (author), Leite Lemos, Vinicius (author), Magalhães Cardoso, Patrick (author), de Oliveira, Leonardo Cosme (author), Castro, Saullo G.P. (author), de Lima Marcolin, Marcelo (author), Joshi, Darshan (author)
Aircraft structural analysis is a process that involves several engineers working concurrently to analyze in detail all structural elements of an airframe, as well as the behavior of the aircraft structure as a whole. The airframe has to be decomposed in its major components such as fuselage sections, wings and control surfaces to allow the...
journal article 2019
document
Landman, H.M. (author)
After several recent flight safety events, such as the accident of Air France flight 447 in 2009, investigators determined that surprise and startle can severely disrupt pilot responses. They concluded that pilots need to be better prepared for unexpected and potentially startling situations. In response, aviation safety authorities have...
doctoral thesis 2019
document
Garcia-Nieto, Sergio (author), Velasco-Carrau, Jesus (author), Paredes-Vallés, Federico (author), Salcedo, Jose Vicente (author), Simarro, Raul (author)
This paper gathers the design and implementation of the control system that allows an unmanned Flying-wing to perform a Vertical Take-Off and Landing (VTOL) maneuver using two tilting rotors (Bi-Rotor). Unmanned Aerial Vehicles (UAVs) operating in this configuration are also categorized as Hybrid UAVs due to their ability of having a dual...
journal article 2019
document
Vermeulen, A.C.J. (author), Papic, Alvaro (author), Kiem, Jason (author), Hallak, D. (author), Brazier, F.M. (author)
To enable sustainable long-duration human space flight, regenerative life support systems (RLSS) will be indispensable. Waste materials will need to be processed and transformed back into nutrients for life-supporting ecosystems. MELiSSA (Micro-Ecological Life Support System Alternative) is a well-documented and studied example of such an...
conference paper 2019
document
Chappin, E.J.L. (author), Nikolic, I. (author), Yorke-Smith, N. (author)
Agent-based modelling and simulation is now accepted as a valuable tool for describing the dynamics of complex socio-technical systems, and for studying complex adaptive systems. This chapter surveys the opportunities and challenges in agent-based models (ABM) for the social dynamics of energy end use. Following an introduction to the...
book chapter 2019
document
Overtoom, Evelien M. (author), Horeman, T. (author), Jansen, F.W. (author), Dankelman, J. (author), Schreuder, Henk W.R. (author)
OBJECTIVES: To provide a systematic overview of the literature assessing the value of haptic and force feedback in current simulators teaching laparoscopic surgical skills. DATA SOURCES: The databases of Pubmed, Cochrane, Embase, Web of Science, and Google Scholar were searched to retrieve relevant studies published until January 31st, 2017....
review 2019
document
Saffarionpour, S. (author), de Jong, Tessa F. (author), van der Wielen, L.A.M. (author), Brouwer, Eric (author), Ottens, M. (author)
For simulating an adsorption/elution step for separation and recovery of flavor-active esters in beer in the presence of ethanol at various temperatures, and validating the predicted breakthrough behavior, equilibrium data on concentration of each ester is required. This work evaluates the application of frontal analysis method (FA) for...
journal article 2019
document
Tang, J. (author), Vincent-Bonnieu, S.Y.F. (author), Rossen, W.R. (author)
We present a CT coreflood study of foam flow with two representative oils: hexadecane C<sub>16</sub> (benign to foam) and a mixture of 80 wt% C<sub>16</sub> and 20 wt% oleic acid (OA) (very harmful to foam). The purpose is to understand the transient dynamics of foam, both generated in-situ and pre-generated, as a function of oil saturation...
conference paper 2019
Searched for: collection%253Air
(41 - 60 of 141)

Pages