Orientation dependence of dynamic compared to static recovery in Interstitial Free steel

This study investigates the sub-structure of IF steel in three conditions: cold rolled, statically recovered, and warm rolled. After both cold and warm rolling, the steel exhibits the typical 〈110〉//RD and 〈111〉//ND fiber textures. Considering the short-range misorientation gradient ∆θ/∆x to assess locally stored energy variations, it was...

Determination and analysis of the constitutive parameters of temperature-dependent dislocation-density-based crystal plasticity models

Physics-based crystal plasticity models rely on certain statistical assumptions about the collective behavior of dislocation populations on one slip system and their interactions with the dislocations on the other slip systems. One main advantage of using such physics-based constitutive dislocation models in crystal plasticity kinematic...

Topological aspects responsible for recrystallization evolution in an IF-steel sheet – Investigation with cellular-automaton simulations

A cellular automaton algorithm for curvature-driven coarsening is applied to a cold-rolled interstitial-free steel's microstructure - obtained through electron backscatter diffraction (EBSD). Recrystallization nucleation occurs naturally during the simulation, due to the highly heterogeneous and hence competitive growth among pre-existing ...

Effect of microstructural defects on passive layer properties of interstitial free (IF) ferritic steels in alkaline environment

The role of microstructural defects (dislocation density and grain boundary areas) on the passive film properties formed on cold- and hot-rolled interstitial free (IF) steels is investigated in 0.1 M NaOH solution. Electron backscattered diffraction (EBSD) shows higher microstructural defect density on cold-rolled samples. Potentiodynamic...

Site-specific quasi in situ investigation of primary static recrystallization in a low carbon steel

Low-alloyed steels with body-centered cubic crystal structure are a material class that is widely used for sheet metal forming applications. When having an adequate crystallographic texture and microstructure, their mechanical behavior is characterized by an isotropic in-plane flow behavior in combination with a low yield strength. The...