Impact of the Current on Reverse Bias Degradation of Perovskite Solar Cells

Nonequal current generation in the cells of a photovoltaic module, e.g., due to partial shading, leads to operation in reverse bias. This quickly causes a significant efficiency loss in perovskite solar cells. We report a more quantitative investigation of the reverse bias degradation. Various small reverse biases (negative voltages) were...

Lifetime Prediction of Current-and Temperature-Induced Degradation in Silicone-Encapsulated 365 nm High-Power Light-Emitting Diodes

We report on the degradation mechanisms and dynamics of silicone encapsulated ultraviolet A (UV-A) high-power light-emitting diodes (LEDs), with a peak wavelength of 365nm. The stress tests were carried out for a period of 8665 hours with forward currents between 350mA and 700mA and junction temperatures up to 132°C. Depending on stress...

A Comprehensive Review on the Characteristics and Modeling of Lithium-Ion Battery Aging

Battery aging is one of the critical problems to be tackled in battery research, as it limits the power and energy capacity during the battery's life. Therefore, optimizing the design of battery systems requires a good understanding of aging behavior. Due to their simplicity, empirical and semiempirical models (EMs) are frequently used in...

A Comparative Study on the Degradation of Alkali-Activated Slag/Fly Ash and Cement-Based Mortars in Phosphoric Acid

This study compares the degradation behavior of the alkali-activated slag/fly ash (AASF) and ordinary Portland cement (OPC) mortars exposed to phosphoric acid with different pH values. The experimental results show that AASF mortars exhibit better resistance than OPC mortars against surface damage, although both systems get white deposits on the...

Electron-Irradiation-Induced Degradation of Transfer Characteristics in Super-Junction VDMOSFET

High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...

A Bienzymatic Cascade for the Complete Hydrolysis of Phthalic Acid Esters

Phthalic acid esters (PAEs) are widely used as plastic additives to increase the flexibility and durability of plastics. Constantly leaching out from plastics, PAEs are ubiquitously found in the environment. As PAEs exhibit biological activities such as being endocrine disruptive, the quest for efficient degradation strategies continues. Here...

Monitoring of silicone adhesive in space solar cells with an embedded multi-parameter TFBG sensor in a simulated space environment

In this research the ageing of a silicone adhesive in a simulated space environment is monitored through an embedded three parameter tilted fibre Bragg grating (TFBG) sensor. Here, the silicone is used as an adhesive between two thin cover glasses, and the space environmental ageing is simulated by thermal cycles in high vacuum conditions ...

Extensive testing on PVC sewer pipes towards identifying the factors that affect their operational lifetime

Polyvinyl chloride (PVC) sewer pipes have operated for decades in a hostile environment, raising concern among sewer managers over the longevity of their drainage systems. Inspection data (CCTV and Panoramo®) reveals that severe defects have already surfaced, yet it is unknown if the material properties of PVC sewers have been affected. In...

A review on the durability of PVC sewer pipes: research vs. practice

Polyvinyl chloride (PVC) has become one of the dominant construction materials for sewer systems over the past decades, as a result of its reputed merits. However, since PVC sewer pipes have operated for decades in a hostile environment, concern over their longevity has been lately raised by sewer managers in the Netherlands. Towards that...

Effects of Thermal Reflowing Stress on Mechanical Properties of Novel SMT-SREKs

A novel silicone rubber elastic key (SREK) is proposed in this paper for surface mounting technology (SMT) applications. Effects of thermal reflowing stress on the mechanical properties of SMT-SREKs are investigated. The manufactured SMT-SREKs, which underwent various reflowing conditions in advance, are subjected to pressing force and...

Study on the Degradation of Optical Silicone Exposed to Harsh Environments

Degradation mechanisms of silicone plates under harsh environment conditions are studied in this investigation. Environmental degradation of silicone free form, used as secondary optics in Light Emitting Diode LED lighting lamps and luminaires or any other applications requiring high quality optics being used, has negative implications for the...

Relating the structural strength of concrete sewer pipes and material properties retrieved from core samples

Drill core samples are taken in practice for an analysis of the material characteristics of concrete pipes in order to improve the quality of the decision-making on rehabilitation actions. Earlier research has demonstrated that core sampling is associated with a significant uncertainty. In this paper, the results of core samples are compared...

Some observations on localisation in non-local and gradient damage models