Searched for: subject%3A%22calibration%22
(1 - 20 of 222)

Pages

document
Yousefzadeh, B. (author)
Temperature greatly affects the performance of integrated circuits, and so temperature sensors are often necessary to ensure reliable operation and stable performance. The goal of the work described in this thesis is to realize a temperature sensor in CMOS technology that can be produced at low cost. In the first step, a temperature sensor is...
doctoral thesis 2024
document
Krasnov, O.A. (author), Zhang, Q. (author), Yarovoy, Alexander (author)
In this paper, the full calibration chain of FMCW radar with simultaneous transmission of two orthogonally polarized orthogonal waveforms is considered. Specifically for this type of polarimetric radar, compensation of signals’ biases and equalization of the amplification gains of the parallel polarimetric channels in the receiver are jointly...
conference paper 2024
document
Adla, Soham (author), Bruckmaier, Felix (author), Arias-Rodriguez, Leonardo F. (author), Tripathi, Shivam (author), Pande, S. (author), Disse, Markus (author)
Sensor data and agro-hydrological modeling have been combined to improve irrigation management. Crop water models simulating crop growth and production in response to the soil-water environment need to be parsimonious in terms of structure, inputs and parameters to be applied in data scarce regions. Irrigation management using soil moisture...
journal article 2024
document
Paul, A. (author), Rafigh Doost, J. (author), Dou, X. (author), Pereira, S.F. (author)
Nanostructures with steep side wall angles (swa) play a pivotal role in various technological applications. Accurate characterization of these nanostructures is crucial for optimizing their performance. In this study, we propose a far-field detection method based on coherent Fourier scatterometry (CFS) for accurate quantification of steep swa...
journal article 2024
document
Stella, F. (author), Della Santina, C. (author), Hughes, Josie (author)
The control possibilities for soft robots have long been hindered by the need for reliable methods to estimate their configuration. Inertial measurement units (IMUs) can solve this challenge, but they are affected by well-known drift issues. This letter proposes a method to eliminate this limitation by leveraging the Piecewise Constant...
journal article 2024
document
Ramousse, B.R. (author), Mendoza Lugo, M.A. (author), Rongen, G.W.F. (author), Morales Napoles, O. (author)
Constructing Bayesian networks (BN) for practical applications presents significant challenges, especially in domains with limited empirical data available. In such situations, field experts are often consulted to estimate the model’s parameters, for instance, rank correlations in Gaussian copula-based Bayesian networks (GCBN). Because there is...
journal article 2024
document
Moriaux, Olivier (author), Zamponi, R. (author), Schram, Christophe (author)
The empirical calibration of remote microphone probes (RMP), used to acquire wall-pressure fluctuations, can introduce spurious resonance into the sensor transfer function due to the difference in the pressure field inside the calibrator geometry over multiple calibration steps. Such spurious resonance subsequently propagates into the...
journal article 2024
document
Mier Escurra, C. (author), Mor, A. R. (author), Vaessen, P.T.M. (author)
This paper introduces a directional coupler for partial discharge (PD) measurements in gas-insulated substations (GIS). The sensor comprises a combination of magnetic and electric couplers, effectively segregating forward and backward pulses to enhance PD charge estimation and defect location. The sensor's design was supported with finite...
journal article 2024
document
Gong, J. (author)
Quantum computers have gained widespread interest from both industry and academia in the last decade as they are very promising for solving problems intractable by classical computers. However, there is a limited number of qubits in current quantum processors, which impedes the practical applications of a quantum computer. To increase the number...
doctoral thesis 2023
document
Hesam, A.S. (author), Pijpers, Frank (author), Rademakers, Fons (author), Al-Ars, Z. (author)
poster 2023
document
Ramamohan, Krishnaprasad Nambur (author), Chepuri, Sundeep Prabhakar (author), Comesana, Daniel Fernandez (author), Leus, G.J.T. (author)
In this work, we consider the self-calibration problem of joint calibration and direction-of-Arrival (DOA) estimation using acoustic sensor arrays. Unlike many previous iterative approaches, we propose solvers that can be readily used for both linear and non-linear arrays for jointly estimating the sensor gain, phase errors, and the source...
journal article 2023
document
Shokrolahzade, E. (author), De Martino, C. (author), Spirito, M. (author)
In this contribution we present an approach to reduce the error arising from the variations of the lumped load, due to process spread, in probe level calibrations. First, full-wave electromagnetic (EM) simulations are employed to generate the nominal standard responses, then a parametric EM simulation of the load structure is used to generate a...
conference paper 2023
document
de Vlam, Valerie (author), Wiertlewski, M. (author), Vardar, Y. (author)
Wearable vibrotactile actuators are non-intrusive and inexpensive means to provide haptic feedback directly to the user's skin. Complex spatiotemporal stimuli can be achieved by combining multiple of these actuators, using the funneling illusion. This illusion can funnel the sensation to a particular position between the actuators, thereby...
journal article 2023
document
Abunada, M.B.M. (author), Dhakal, Nirajan (author), Andyar, William Z. (author), Li, Yuke (author), Ajok, Pamela (author), Ghaffour, Noreddine (author), Schippers, Jan C. (author), Kennedy, M.D. (author)
This study aimed to calibrate and validate the MFI-UF method in order to ensure the accuracy of particulate fouling measurements in RO. Firstly, the MFI-UF calibration was examined using two solutions of standard particles (dextran and polystyrene). Two main criteria were investigated: (i) MFI-UF linearity with particle concentrations at both...
journal article 2023
document
van der Graaf, H. (author), Bertolini, Alessandro (author), van Heijningen, Joris (author), Bouwens, Bram (author), de Gaay Fortman, Nelson (author), van der Reep, Tom (author), Otemann, Lennart (author)
The Rasnik system is a 3-point optical displacement monitor with sub-nanometer precision. The CCD-Rasnik alignment system was developed in 1993 for monitoring the alignment of the muon chambers of the ATLAS Muon Spectrometer at CERN. Since then, the development has continued as new CMOS imaging pixel chips became available. In this work the...
journal article 2023
document
van Meer, Max (author), Deniz, Emre (author), Witvoet, Gert (author), Oomen, T.A.E. (author)
Sensors in high-precision mechatronic systems require accurate calibration, which is achieved using test beds that, in turn, require even more accurate calibration. The aim of this paper is to develop a cascaded calibration method for position sensors of mechatronic systems while taking into account the variance of the calibration model of...
journal article 2023
document
Mier Escurra, C. (author), Mor, A. R. (author), Vaessen, P.T.M. (author)
Partial discharge (PD) measurements in gasinsulated substations (GIS) are tested according to the standard IEC 60270. This “conventional” PD test method applies to electrically small devices. The equipment size increases the resonance, and attenuation, contributing to the total uncertainty. Additionally, when an ultra-high frequency (UHF) sensor...
conference paper 2023
document
Hadi, A.H. (author), Roeplal, R.N. (author), Pang, Y. (author), Schott, D.L. (author)
Segregation control is a challenging yet crucial aspect of bulk material handling processes. The discrete element method (DEM) can offer useful insights into segregation phenomena, provided that reliable models are developed. The main challenge in this regard is finding a good balance between including particle-level details and managing the...
journal article 2023
document
Mier Escurra, C. (author), Khamlichi, Abderrahim (author), Dalstein, Matthieu (author), Vidal, Jose Ramon (author), Garnacho, Fernando (author), Mor, Armando Rodrigo (author), Vu-Cong, Thanh (author)
Driven by the voltage increase in high-voltage direct current (HVDC) gas-insulated substations (GISs), novel methods are needed for partial discharge (PD) detection and monitoring. This article shows a PD calibration method for very-high-frequency (VHF) magnetic and electric sensors in GIS. The calibration method uncertainty is tested in...
journal article 2023
document
Refsgaard, Jens Christian (author), Mai, Juliane (author), Hrachowitz, M. (author), Jain, Sharad K. (author), Stisen, Simon (author)
Catchment modelling has undergone tremendous developments during the past decades. In the 1970s, the focus was on simulation of catchment runoff with process descriptions and data inputs being lumped to the catchment scale. Later developments included spatially distributed models allowing data inputs and hydrological processes to be simulated at...
journal article 2023
Searched for: subject%3A%22calibration%22
(1 - 20 of 222)

Pages