Searched for: subject%3A%22coating%22
(1 - 20 of 21)

Pages

document
Madelat, Negin (author), Wouters, Benny (author), Visser, Peter (author), Jiryaeisharahi, Zahra (author), Marcoen, Kristof (author), Abrahami, S.T. (author), Hubin, Annick (author), Terryn, H.A. (author), Hauffman, Tom (author)
In this work, the correlation between electrolyte transport properties and the variation of pigment volume concentration (PVC) in a series of organic coatings is explored. Using an odd random phase electrochemical impedance spectroscopy (ORP-EIS) approach, the diffusion of ions independent from water take-up is analysed. A higher PVC resulted...
journal article 2024
document
Meeusen, M. (author), van Dam, J.P.B. (author), Madelat, N. (author), Jalilian, E. (author), Wouters, B. (author), Hauffman, T. (author), Van Assche, G. (author), Mol, J.M.C. (author), Hubin, A. (author), Terryn, H.A. (author)
In this work, a new finite element modelling (FEM) approach is followed to model spatiotemporally resolved water uptake in organic coatings. To this aim, we start from a physical model, where not only Fickian diffusion of water is taken into account but also the adsorption/desorption reaction of water on the polymer matrix. Starting from a...
journal article 2023
document
Marcoen, Kristof (author), Gauvin, Mélanie (author), De Cleene, Ansbert (author), Obitsø Nielsen, Jacob (author), Baert, Kitty (author), Terryn, H.A. (author), De Strycker, Joost (author), Hauffman, Tom (author), Pantleon, Karen (author)
Electrodeposition from an environmentally friendly iron sulfate electrolyte with citric acid as carbon source has gained attention recently, because of excellent mechanical properties of the resulting Fe–C coatings with intentionally codeposited high-carbon concentrations. While being very attractive as protective coatings and sustainable...
journal article 2023
document
Liu, Tong (author), Zhang, Dawei (author), Ma, Lingwei (author), Huang, Yao (author), Hao, Xiangping (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Herein, we report the development of a self-sensing and active corrosion protection coating which incorporates pH-sensitive multilayer chitosan/alginate-covered CaCO<sub>3</sub> microcontainers containing 1,10-phenanthrolin-5-amine (APhen). The microcontainers can respond to pH variation to release APhen which serves not only as a corrosion...
review 2022
document
Visser, P. (author), Ranade, S. (author), Laird, J. S. (author), Glenn, A. M. (author), Hughes, A. E. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Depletion depths of inorganic components from a scribe edge in a polyurethane primer containing Li<sub>2</sub>CO<sub>3</sub>, MgO, BaSO<sub>4</sub> and TiO<sub>2</sub> beneath a topcoat, were determined using a range of techniques including SEM/EDS and proton induced X-ray and γ-ray emission spectroscopies. SEM of sections cut using an ion...
journal article 2021
document
Tiringer, U. (author), van Dam, J.P.B. (author), Abrahami, S.T. (author), Terryn, H.A. (author), Kovač, J. (author), Milošev, I. (author), Mol, J.M.C. (author)
The sol-gel synthesis process is a versatile method used to produce a wide diversity of materials and is being increasingly used as a surface modification method to alter porosity, wettability, catalytic activity, biocompatibility and corrosion performance of underlying substrates. Silane sol–gel films deposited on aluminium and aluminium...
review 2021
document
Kosari, A. (author), Tichelaar, F.D. (author), Visser, P. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium leaching coatings have recently been developed as eco-friendly active corrosion protection technology for aerospace aluminium alloys (AAs) by the formation of a conversion layer at coating defects. While general conversion layer formation characteristics were studied and reported before, here we study the local layer formation process...
journal article 2021
document
Ma, Lingwei (author), Wang, Jinke (author), Zhang, D. (author), Huang, Yao (author), Huang, Luyao (author), Wang, Panjun (author), Qian, Hongchang (author), Li, Xiaogang (author), Terryn, H.A. (author), Mol, J.M.C. (author)
This work introduces a novel nanocomposite coating with dual-action self-healing corrosion protection activated by the photothermal response of plasmonic titanium nitride nanoparticles (TiN NPs). TiN@mesoporous SiO<sub>2</sub> core–shell nanocontainers were developed as reservoirs for benzotriazole (BTA) corrosion inhibitors and incorporated...
journal article 2021
document
Fockaert, L.I. (author), Ankora, M.V.E. (author), van Dam, J.P.B. (author), Pletincx, S. (author), Yilmaz, A. (author), Boelen, B. (author), Hauffman, T. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
The bonding properties of zirconium- and titanium-based conversion coatings were evaluated using model conversion solutions of H<sub>2</sub>ZrF<sub>6</sub> and H<sub>2</sub>TiF<sub>6</sub> with addition of various organic additives (PAA, PVA, PVP). Macroscopic testing techniques such as contact angle and pull-off adhesion measurements were...
journal article 2020
document
Fockaert, L.I. (author), Pletincx, S. (author), Ganzinga-Jurg, D. (author), Boelen, B. (author), Hauffman, T. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
In this work, in-situ ATR-FTIR in the Kretschmann configuration is proposed as an interfacial sensitive technique able to probe molecular processes at the buried interface of an industrial relevant polyester primer. Zinc, aluminium and magnesium oxide were used to represent oxides present at galvanized steel sheets used in coil coating. Two...
journal article 2020
document
Laird, J. S. (author), Visser, P. (author), Ranade, S. (author), Hughes, A.E. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Studies of Li depletion in sections of a Li <sub>2</sub> CO <sub>3</sub> -primer comprising a polyurethane binder, MgO, TiO <sub>2</sub> , BaSO <sub>4</sub> in addition to Li <sub>2</sub> CO <sub>3,</sub> were performed using a combination of particle induced γ-ray and X-ray emission spectroscopies along with SEM/EDS analysis. A mixture of...
journal article 2019
document
Marcoen, Kristof (author), Visser, P (author), Trindade, G. F. (author), Abel, M. L. (author), Watts, J. F. (author), Mol, J.M.C. (author), Terryn, H.A. (author), Hauffman, T. (author)
Organic primer coatings loaded with environmentally harmful Cr(VI) corrosion inhibitive pigments still play an important role in corrosion protection of aluminium alloys for the aerospace industry. A potential “green” alternative coating system has recently been developed, loaded with lithium salt corrosion inhibitors. Under exposure to...
journal article 2018
document
Huang, Yao (author), Deng, Leping (author), Ju, Pengfei (author), Huang, Luyao (author), Qian, H. (author), Zhang, Dawei (author), Li, Xiaogang (author), Terryn, H.A. (author), Mol, J.M.C. (author)
In this study, a new self-healing shape memory polymer (SMP) coating was prepared to protect the aluminum alloy 2024-T3 from corrosion by the incorporation of dual-function microspheres containing polycaprolactone and the corrosion inhibitor 8-hydroxyquinoline (8HQ). The self-healing properties of the coatings were investigated via scanning...
journal article 2018
document
Qian, Hongchang (author), Xu, Dake (author), Du, Cuiwei (author), Zhang, Dawei (author), Li, Xiaogang (author), Huang, Luyao (author), Deng, Leping (author), Tu, Yunchao (author), Mol, J.M.C. (author), Terryn, H.A. (author)
This work introduces a new self-healing superhydrophobic coating based on dual actions by the corrosion inhibitor benzotriazole (BTA) and an epoxy-based shape memory polymer (SMP). Damage to the surface morphology (e.g., crushed areas and scratches) and the corresponding superhydrophobicity are shown to be rapidly healed through a simple heat...
journal article 2017
document
Laird, Jamie S. (author), Hughes, Anthony E. (author), Ryan, C.J. (author), Visser, P (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium based inhibitors in aerospace coatings are seen as excellent replacements for their chromium counterparts which are both carcinogenic and heavier. However, Li is generally difficult to detect and following changes in its distribution due to corrosion is impossible with many standard techniques. Combining MeV Particle Induced Gamma and...
journal article 2017
document
Visser, P. (author), Meeusen, M. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
This work presents the electrochemical evaluation of protective layers generated in a coating defect from lithium-leaching organic coatings on AA2024-T3 aluminum alloys as a function of neutral salt spray exposure time. Electrochemical impedance spectroscopy was used to study the electrochemical properties on a macroscopic scale. An...
journal article 2017
document
Visser, P (author), Liu, Y (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium salts are being investigated as leachable corrosion inhibitor and potential replacement for hexavalent chromium in organic coatings. Model coatings loaded with lithium carbonate or lithium oxalate demonstrated active corrosion inhibition and the formation of a protective layer in a damaged area during neutral salt spray exposure. The...
journal article 2016
document
Leon Fuenmayor, E.J. (author), Koleva, D.A. (author), Jonkers, H.M. (author), Mol, J.M.C. (author), Terryn, H. (author), Van Breugel, K. (author)
Impressed current cathodic protection (CP) based on pulse technology has been proven to be a more efficient and effective alternative of traditional CP for reinforced concrete applications. Essentially, the superiority of pulse CP is in achieving the required steel polarization with otherwise reduced side effects (e.g. influence on bond strength...
conference paper 2013
document
León, E.J. (author), Koleva, D.A. (author), Jonkers, H.M. (author), Mol, J.M.C. (author), Terryn, H. (author), Van Breugel, K. (author)
Impressed current cathodic protection (CP) based on pulse technology has been proven to be a more efficient and effective alternative of traditional CP for reinforced concrete applications. Essentially, the superiority of pulse CP is in achieving the required steel polarization with otherwise reduced side effects (e.g. influence on bond strength...
conference paper 2013
document
De Belie, N. (author), Du Prez, F. (author), Terryn, H. (author), Wallaeys, B. (author)
Abstract only.
conference paper 2013
Searched for: subject%3A%22coating%22
(1 - 20 of 21)

Pages