Searched for: subject%3A%22energy%255C%252Befficiency%22
(41 - 60 of 66)

Pages

document
Filippidou, F. (author), Nieboer, N.E.T. (author), Visscher, H.J. (author)
Energy renovations offer unique opportunities to increase the energy efficiency of the built environment and for the existing housing stock; they are the most important solution. Usually, energy savings are based on modeling calculations. However, recent research has shown that the predicted energy consumption differs largely from the actual...
journal article 2019
document
Tronchin, Lamberto (author), Manfren, Massimiliano (author), Nastasi, B. (author)
The identification of techno-economically feasible decarbonisation paths and sustainability transitions for the built environment is a necessary task for research today and building stock renovation processes can act in synergy with innovative economic and technological development paradigms to achieve different types of benefits such as...
journal article 2019
document
Akgün, O.C. (author), Mangia, Mauro (author), Pareschi, Fabio (author), Rovatti, Riccardo (author), Setti, Gianluca (author), Serdijn, W.A. (author)
This paper presents the design of an ultra-low energy, rakeness-based compressed sensing (CS) system that utilizes time-mode (TM) signal processing (TMSP). To realize TM CS operation, the presented implementation makes use of monostable multivibrator based analog-to-time converters, fixed-width pulse generators, basic digital gates and an...
conference paper 2019
document
Nguyen, P.A. (author), Bokel, R.M.J. (author), van den Dobbelsteen, A.A.J.F. (author)
Purpose: Refurbishing houses is considered a key measure to improve the energy efficiency of the built environment. However, little is known about the implementation and outcome of housing renovation for energy upgrades in the Vietnamese practice. The purpose of this paper is to investigate the energy performance of the current housing stock...
journal article 2019
document
de Vries, G. (author), Rietkerk, M. (author), Kooger, R. (author)
In order to reach climate goals, policymakers stimulate homeowners to invest in sustainable measures in and around their house. Unfortunately, however, the number of green home measures lacks behind. This article introduces perceived hassle as an important reason for this shortfall. It is claimed that homeowners perceive hassle during different...
journal article 2019
document
Zucca, Mauro (author), Bottauscio, Oriano (author), Harmon, Stuart (author), Guilizzoni, Roberta (author), Schilling, Florian (author), Schmidt, Matthias (author), Ankarson, Peter (author), Bauer, P. (author), Dong, J. (author)
The European Union funded project MICEV aims at improving the traceability of electrical and magnetic measurement at charging stations and to better assess the safety of this technology with respect to human exposure. The paper describes some limits of the instrumentation used for electrical measurements in the charging stations, and briefly...
conference paper 2019
document
Raji, B. (author)
With the aim to limit the number of ineffective designs, this dissertation has investigated the impact of architectural design strategies on improving the energy performance of and thermal comfort in high-rise office buildings in temperate, sub-tropical and tropical climates. As the starting-point of this research, a comparative study between...
doctoral thesis 2018
document
Suárez, Rafael (author), Escandon, R. (author), López-Pérez, Ramón (author), León-Rodríguez, Ángel Luis (author), Klein, T. (author), Silvester, S. (author)
According to the IPCC Climate Change projections by 2050 temperatures in southern Spain will have increased noticeably during the summer. Housing-in its current form-will not be able to provide a suitable response to this new climate scenario, and will in turn prompt an increase in cooling energy consumption and a series of problems relating...
journal article 2018
document
Ortiz, Marco A. (author), Bluyssen, P.M. (author)
Two main strategies have generally been used for tackling energy reduction: one dealing with the design and development of building systems and appliances that are engineered to be as efficient as possible while meeting standards, the other addressing the user, usually through campaigns, advertisements, or physical interventions, with the...
abstract 2018
document
Kwon, M. (author), Remøy, H.T. (author)
The building sector accounts for more than one-third of the total primary energy use and has significant potential for energy saving [1]. However, various physical and social factors affect the energy performance of dynamic systems, such as the indoor climate condition, the building envelope, maintenance, building equipment, operation, and...
abstract 2018
document
Pan, S. (author), Makinwa, K.A.A. (author)
Temperature sensors based on Wheatstone bridges, e.g. [1,2], have recently achieved higher resolution and greater energy efficiency than conventional BJT-based sensors [3]. However, this comes at the expense of area, making them less attractive in industrial applications. This paper presents a Wheatstone-bridge sensor that uses a zoom-ADC...
conference paper 2018
document
Jiang, H. (author), Amani, Samira (author), Vogel, J.G. (author), Heidary Shalmany, S. (author), Nihtianova, S. (author)
This paper describes a high-performance Capacitance-to-Digital Converter (CDC) for sub-nm displacement sensing with an electrically floating target. Intended to be integrated into a displacement sensor probe, the CDC consumes only 560μW. It achieves 98.5dB SNR in a 1ms conversion time, which is 34 times more energy-efficient than the prior...
conference paper 2018
document
Zhou, H. (author)
The research presented in this thesis focuses on the use of hydrate slurries in the air conditioning and refrigeration areas. Both experimental and mathematical methods have been used. Hydrate slurries have been suggested as promising cold storage materials that can be used in air conditioning systems due to their high latent heat (193 kJ/kg and...
doctoral thesis 2017
document
Carvajal Carreño, W. (author)
Energy consumption reduction is one of the priorities of metro operators, due to financial cost and environmental impact. The new signalling system Communications- Based Train Control (CBTC) is being installed in new and upgraded metro lines to increase transportation capacity. But its continuous communication feature also permits to improve the...
doctoral thesis 2017
document
Bedir, M. (author), Kara, Emre C. (author)
In EU member states, the consumption of electricity per dwelling has remained more or less constant, although the consumption of large appliances has decreased considerably in the last 2 decades. This stabilization is caused by the increased ownership, usage and consumption levels of Information, Communication and Entertainment (ICE)...
journal article 2017
document
Wang, K. (author), Yan, Xinping (author), Yuan, Yupeng (author), Jiang, X. (author), Lodewijks, G. (author), Negenborn, R.R. (author)
In the case of the global energy crisis and the higher sound of energy saving and emission reduction, how to take effective management measures of ship energy efficiency to achieve the goal of energy saving and emission reduction, put forward a new challenge for the development of shipping technology. The application of big data technology...
conference paper 2017
document
Pan, S. (author), Jiang, H. (author), Makinwa, K.A.A. (author)
This paper presents the most energy-efficient CMOS temperature sensor ever reported, with a resolution FoM of 49fJ·K2, 2.7× better than the state-of-the-art. It consists of a Wheatstone bridge made from poly-silicon resistors, which is readout by a 2nd-order Continuous-Time Delta-Sigma modulator (CTDSM). This approach leads to a high resolution ...
conference paper 2017
document
Filippidou, F. (author), Nieboer, N.E.T. (author), Visscher, H.J. (author)
The existing housing stock plays a major role in meeting the energy saving targets set in the Netherlands as well as in the EU. Existing buildings account for 38% of the final energy consumption in the European Union (EU), and they are responsible for 36% of the CO<sub>2</sub> emissions. Energy renovations in dwellings offer unique...
journal article 2017
document
Raji, B. (author), Tenpierik, M.J. (author), van den Dobbelsteen, A.A.J.F. (author)
The building envelope is the interface between the interior of the building and the outdoor environment. A building's energy consumption to a large extent depends on certain envelope design elements. As a consequence, for achieving high levels of energy-saving in buildings, design measures with high impact should be firstly defined and then...
journal article 2016
document
Holck Sandberg, N. (author), Sartori, I. (author), Heidrich, O. (author), Dawson, R. (author), Dascalaki, E. (author), Dimitriou, S. (author), Vimm-r, T. (author), Filippidou, F. (author), Stegnar, G. (author), Sijanec Zavrl, M. (author), Brattebø, H. (author)
A dynamic building stock model is applied to simulate the development of dwelling stocks in 11 European countries, over half of all European dwellings, between 1900 and 2050. The model uses time series of population and number of persons per dwelling, as well as demolition and renovation probability functions that have been derived for each...
journal article 2016
Searched for: subject%3A%22energy%255C%252Befficiency%22
(41 - 60 of 66)

Pages