Stretchable strain sensor based on HfSe₂/LIG composite with high sensitivity and good linearity within a wide range

Flexible strain sensors based on nanomaterials have sparked a lot of interest in the field of wearable smart electronics. Laser induced graphene (LIG) based sensors in particular stand out due to their straightforward fabrication procedure, three-dimensional porous structures, and exceptional electromechanical capabilities. Recent studies...

A Novel High-temperature Pressure Sensor Based on Graphene Coated by Si3N4

The high-temperature pressure sensors have wide applications in aerospace, petroleum, geothermal exploration, automotive electronics, and other fields. However, the traditional silicon-based pressure sensors are restricted to pressure measurement under 120~{\circ }\text{C} and cannot be satisfied to measure the pressure of various gases or...

Silicon carbide-on-insulator thermal-piezoresistive resonator for harsh environment application

The thermal-piezoresistive effect in silicon (Si) has attracted great attention toward high-performance resonant devices but still faces major challenges for harsh environment applications. Instead of using Si, this paper, for the first time, reports a thermal-piezoresistive resonator based on a silicon carbide-on-insulator (SiCOI) platform. The...

Degradation Estimation and Prediction of Electronic Packages using Data Driven Approach

Recent trends in automotive electronics such as automated driving will increase the number and complexity of electronics used in safety-relevant applications. Applications in logistics or ridesharing will require a specific year of service rather than the conventional mileage usage. Reliable operations of the electronic systems must be...

Measuring crack growth and related opening and closing stresses using continuous potential drop recording

To improve resolution of in-situ measurement of crack closure and opening in fatigue, potential drop (PD) measurement technique has been further developed to measure thousands of times through each load cycle with high precision. The results are interpreted with physical phenomena like strain, Poisson's effect, piezo-resistivity, plasticity,...

In Situ  Failure Detection of Electronic Control Units Using Piezoresistive Stress Sensor

Recent advancements in automotive technologies, most notably autonomous driving, demand electronic systems much more complex than those realized in the past. The automotive industry has been forced to adopt advanced consumer electronics to satisfy the demand, and thus it becomes more challenging to assess system reliability while adopting the...

Piezoresistive properties of cementitious composites reinforced by PVA fibres

The use of fibres to enhance the ductility of cementitious composites has been extensively studied for the past few years. The addition of polymeric or metalic fibres with random orientation to the composite or even natural long and aligned fibres demonstrated a very successful reinforcement capable to reach a high mechanical performance....

Development of Nanotools for Applications in (sub-)Femtofluidics and Graphene Technologies

Properties of matter at the nano-scale may be very different from the ones observed at the macro-scale. The continuous variation of characteristics with diminishing size results in relevant changes in behavior. Similarly, these changes are caused by the rise of completely new phenomena (i.e. quantum confinement). Nanoscience can offer an...

Graphene based piezoresistive pressure sensor

We present a pressure sensor based on the piezoresistive effect of graphene. The sensor is a 100?nm thick, 280??m wide square silicon nitride membrane with graphene meander patterns located on the maximum strain area. The multilayer, polycrystalline graphene was obtained by chemical vapor deposition. Strain in graphene was generated by applying...

6 DOF Force and Torque Sensor for Micro-manipulation Applications

This paper presents the design, fabrication and characterization of a piezoresistive 6 Degrees of Freedom (DOF) force and torque sensor to be used in micro-manipulation. The mechanical structure of the device consists of 7 suspended beams and a calibration structure, which can be replaced by micro-manipulation tools such as micro-grippers or...

Piezoresistive Probe Array for High Throughput Applications

Microcantilevers are used in a number of applications including atomic-force microscopy (AFM). In this work, piezoresistive deflection-sensing elements are integrated onto micromachined cantilevers to increase sensitivity, and reduce complexity and cost. An array of probes with 5 nm gold ultrathin film sensors on silicon substrates for high...

Design and Modeling of a Flexible Contact-Mode Piezoresistive Detector for Time-Based Acceleration Sensing

This work reports on the design and modeling of a new flexible contact-mode 1-DOF piezoresistive contact force and impacttime detector used for acceleration sensing in the time domain. The key advantages of the contact-mode detection mechanism are the use of simple readout circuitry, compactness, good linearity, scalability, and the potential to...

Silicon MEMS for Detection of Liquid and Solid Fronts

High-precision manipulation of small-size objects is an attractive and challenging topic for both industrial production and fundamental scientific research. The capability of monitoring micro-samples during handling is essential to the accuracy and efficiency of a handling system for both liquid and solid samples. When handling liquid samples...

The effect of mechanical stress on bipolar transistor characteristics

Electrical transport in monolayers of phthalocyanine molecular wires and AFM imaging of a single wire bridging two electrodes