- document
-
Banis, Alexandros (author), Gomez, Andrea (author), Bliznuk, Vitaliy (author), Dutta, Aniruddha (author), Sabirov, Ilchat (author), Petrov, R.H. (author)This study focuses on the microstructure's evolution upon different aging conditions of a high-strength low-density steel with a composition of Fe–28Mn–9Al–1C. The steel is hot rolled, subsequently quenched without any solution treatment, and then aged under different conditions. The microstructure of the samples was studied by means of...journal article 2023
- document
-
Barros, B. (author), Conde, B. (author), Riveiro, B. (author), Morales Napoles, O. (author)Finite Element (FE) modeling often requires unavoidable simplifications or assumptions due to a lack of experimental data, modeling complexity, or non-affordable computational cost. One such simplification is modeling corrosion phenomena or material properties, which are usually assumed to be uniform throughout the structure. However, e.g.,...journal article 2023
- document
-
Yang, Xinkui (author), Wu, Shaopeng (author), Xu, S. (author), Chen, B. (author), Chen, Dongyu (author), Wang, Fusong (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)Aimed to address the low utilization rate of steel slag (SS) and its challenge in resource utilization in China, this study developed ternary geopolymers made by high-content (50%) SS together with fly ash (FA) and granulated blast furnace slag (GBFS). The effects of GBFS content (0–40%) and curing methods (water curing, standard curing,...journal article 2023
- document
-
Liao, D.L. (author), Cheng, L. (author), Correia, J.H.G. (author), Veljkovic, M. (author), Zhu, Shun Peng (author), Winkes, Jasper (author), Creusen, Koen (author), Berto, Filippo (author)Hole patterns are common in engineering design for connections and/or assembly purposes. Geometrical discontinuities can cause stress concentration in localized areas, making them more prone to fatigue crack initiation and influencing the fatigue life of the overall unit. In the past, much effort has been exerted on fatigue modelling of holed...journal article 2023
- document
-
Zhou, Y. (author), Liang, M. (author), Yue, X. (author)Large errors can be introduced in traditional acoustic emission (AE) source localization methods using extracted signal features such as arrival time difference. This issue is obvious in the case of irregular structural geometries, complex composite structure types or presence of cracks in wave travel paths. In this study, based on a novel...journal article 2023
- document
-
Mojto, Maroš (author), Cabboi, A. (author)This study aims at shedding light on the mechanical behaviour of a prototype monopile–wind turbine tower connection, constituted by a slip joint. Selected examples of data set recorded during a long term monitoring campaign are illustrated and discussed. The data set encompass axial and hoop stresses measured over the slip joint area,...journal article 2023
- document
-
Mohabeddine, A.I. (author), Malik, Ghassan (author), Correia, José (author), De Jesus, Abílio (author), Fantuzzi, Nicholas (author), Miguel Castro, José (author)The use of the brittle adhesives commonly adopted in construction industry do not provide the best performance for steel structures. CFRP/Steel joint bonded with extremely tough adhesive achieve much higher strength and ductility. However, tough adhesives are not developed for the construction industry and their cost may question the...journal article 2023
- document
-
Nikolic, Ksenija (author), De Wispelaere, Jelle (author), Ravi, Gopalakrishnan (author), Hertelé, Stijn (author), Depover, Tom (author), Verbeken, Kim (author), Petrov, R.H. (author)Damage in bearings is closely associated with the presence of microstructural alterations, known as white etching areas (WEAs) and white etching cracks (WECs). One of the main reasons for the creation of these microstructural alterations is the presence of defects in the material, such as non-metallic inclusions. Manganese sulfides and...journal article 2023
- document
-
Bai, Wei (author), Xu, X. (author), Liu, Yaolan (author), Liang, Yunxiao (author), Shen, Yijie (author), Han, Zhenyu (author), Sheng, Zhendong (author), Chen, Rong (author), Zhu, Minhao (author)Systematic experimental investigations were conducted to study the microstructures and impact toughness of each heat affected zone (HAZ) formed during rail flash-butt welding. A high-strength carbide-free bainitic rail steel was subjected to different thermal simulation cycles to separately reproduce each HAZ subzone by tailoring the peak...journal article 2023
- document
-
Aghaeian, S. (author), Norouzi, F. (author), Sloof, W.G. (author), Mol, J.M.C. (author), Bottger, A.J. (author)The parabolic growth rate constant (k<sub>p</sub>) of high-temperature oxidation of steels is predicted via a data analytics approach. Four machine learning models including Artificial Neural Networks, Random Forest, k-Nearest Neighbors, and Support Vector Regression are trained to establish the relations between the input features ...journal article 2023
- document
-
Yan, R. (author), Xie, Hui (author), Yang, Fei (author), Veljkovic, M. (author), Zhao, Xiao lin (author)This paper reports an investigation on the tensile resistance of fully-penetrated butt-welded connections of (ultra-)high-strength steels considering the strength softening of the heat-affected zone (HAZ) and the strengthening due to the transverse constraint. Firstly, a parametric study is carried out to analyse the tensile behaviour of...journal article 2023
- document
-
Babu, A. (author), Ebrahimi, Amin (author), Wu, K. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)Additive manufacturing offers a significant potential for producing metallic parts with distinctly localised microstructures and mechanical properties, commonly known as functional grading. While functional grading is generally accomplished through compositional variations or in-situ thermo-mechanical treatments, variation of process...journal article 2023
- document
-
Christoforidou, A. (author), Verleg, R.L. (author), Pavlovic, M. (author)Resins are essential structural materials predominantly used in load-bearing connections such as adhesively bonded joints and resin-injected bolted connections. In an effort to improve the latter, a new injection material, Steel Reinforced Resin (SRR), has been developed, consisting of spherical steel particles embedded in a resin. SRR's...journal article 2023
- document
-
Banis, Alexandros (author), Gomez, Andrea (author), Dutta, Aniruddha (author), Sabirov, Ilchat (author), Petrov, R.H. (author)The strengthening via precipitation of nano-sized κ-carbides leads to exceptional strength-ductility balance in low-density steels. During aging, such nanocarbides form through spinodal decomposition by fluctuations in the aluminum and carbon content in the austenite, followed by short-range ordering. At lower aging temperatures and short...journal article 2023
- document
-
Sierra Soraluce, A. (author), Li, G. (author), Santofimia, Maria Jesus (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Muratori, M. (author), Sabirov, I. (author)Recent studies have demonstrated the viability of quenching and partitioning (Q&P) treatment for processing martensitic stainless steels showing an improved balance of high strength and sufficient ductility. However, to date, the fatigue behaviour of these materials has not been explored. This study examines the effect of their complex...journal article 2023
- document
-
Poliotti, M. (author), Yang, Y. (author), De Boer, Ane (author)In old Dutch inner cities like Amsterdam a large number of steel-concrete bridge decks built between 1880 and 1960 remain in service nowadays and currently need assessment of their bearing capacity. A significant number of these decks were designed without any mechanical connectors like shear studs in the interface between concrete and steel....conference paper 2023
- document
-
Al-Obaidi, S.M.J. (author), He, S. (author), Schlangen, E. (author), Ferrara, Liberato (author)This study investigates the bond-slip behavior of micro steel fibers embedded into an Ultra-High-Performance Concrete (UHPC) matrix as affected by the self-healing of the same matrix in different exposure conditions. The UHPC matrix contains a crystalline admixture as a promoter of the autogenous self-healing specially added to enhance the...journal article 2023
- document
-
Mishra, V. (author), Ayas, C. (author), Langelaar, Matthijs (author)In metal Additive Manufacturing (AM), the deposited material is subjected to a series of heating and cooling cycles. The locally occurring temperature extremes and cooling rates determine solid-state phase fractions, material microstructure, texture, and ultimately the local material properties. As the shape of a part determines the local...journal article 2023
- document
-
Diao, Yan (author), Chen, Long (author), Huang, Y. (author)Waste glass (WG), as a nonbiodegradable material, poses a threat to environmental protection. The reuse of WG as a raw material to replace cement or aggregate in concrete production is gaining attention for recycling purposes. However, the optimal proportion of WG in concrete mixtures and its particle size distribution are hard to determine....journal article 2023
- document
-
Conde, Jorge (author), da Silva, Luis S. (author), Tankova, T. (author), Simões, Rui (author), Abecasis, Tiago (author)The design of pin connections between steel members has been established for many years in design codes. However, recently, in the scope of the revision of Eurocode 3, Part 1–8 (EN 1993–1-8), questions were raised concerning the safety of the corresponding design verifications. This paper identifies two main aspects that require revision,...journal article 2023