Thermomechanical Oriented Reliability Enhancement of Si MOSFET Panel-Level Packaging Fusing Ant Colony Optimization With Backpropagation Neural Network

Considerable advancements in power semiconductor devices have resulted in such devices being increasingly adopted in applications of energy generation, conversion, and transmission. Hence, we proposed a fan-out panel-level packaging (FOPLP) design for 30-V Si-based metal-oxide-semiconductor field-effect transistor (MOSFET). To achieve...

Experimental and modeling study on the transient flow and time-dependent yield stress of superfine-tailings cemented paste backfill

The fresh superfine-tailings cemented paste backfill (SCPB) exhibits strong thixotropy, but quantification of the resulting transient flow (non-steady state) and time-dependent yield stress is lacking. In this study, a simple qualitative model was developed to describe the transient flow and time-dependent yield stress of SCPB. The effect of...

External surface cracked offshore pipes reinforced with composite repair system: A numerical analysis

This paper conducts a numerical analysis on the external surface cracked steel pipes reinforced with Composite Repair System. A three-dimensional finite element (FE) model is developed to calculate the Stress Intensity Factor (SIF) of the surface crack, and the crack growth process is evaluated by the Paris’ law. The effect of FRP-to-steel...

Partial Discharge Behavior of Typical Defects in Power Equipment under Multilevel Staircase Voltage

With the widespread application of power electronic switching technology, power equipment is facing new electrical stresses brought about by multilevel staircase voltages during testing and operation. Therefore, the partial discharge (PD) behavior of five typical defects in power equipment under the staircase waveform needs to be investigated...

Effect of fine aggregate on rheological properties of ultra-high performance concrete（UHPC)

In this paper, four kinds of ecological fine aggregates (manufactured sand, recycled sand, aeolian sand and river sand) were used to prepared UHPC, the effects of the fine aggregates on the workability, rheological properties and mechanical properties of UHPC were studied. The results reveal that the type and content of fine aggregate have an...

A Numerical Investigation of an Abnormal Phenomenon of Stress Intensity Factor (SIF) in a Cracked T-Butt Joint Accounting for Welding Effect

Industry design standards such as BS 7910 deployed some empirical formulas for the prediction of stress intensity factor (SIF) based on simulation results from traditional finite element method (FEM). However, such FEM simulation occasionally failed to convince people due to the large discrepancies compared with engineering practice. As a...

Numerical investigation on the surface crack growth in FRP-reinforced steel plates subjected to tension

In this paper, we analyse the surface crack growth in the Fibre-Reinforced Polymer (FRP) reinforced steel plates subjected to tension by means of the finite element (FE) method. Following the experimental study, a three-dimensional FE model is developed to evaluate the Stress Intensity Factor (SIF) of the surface crack, and the crack growth...

Numerical analysis on the SIF of internal surface cracks in steel pipes reinforced with CRS subjected to bending

In this paper, Composite Repair System (CRS) is applied to repair the circumferential internal surface cracked steel pipes subjected to bending. The Stress Intensity Factor (SIF) is quantitatively analysed by means of numerical simulations, and the crack growth rate is predicted by using the Paris’ law. First, the three-dimensional finite...

Numerical investigation of the SIFs of the external surface crack in rigid pipe reinforced with FRP

Fatigue is one of the major challenges of offshore rigid pipes. The surface crack is the main manifestation. Fatigue cracks are evolved from surface cracks which are frequently appear in the external surface of rigid pipes. Under fatigue loads, the surface cracks may continue to propagate and finally develop into penetrated cracks, which may...

Residual ultimate strength of damaged seamless metallic pipelines with combined dent and metal loss

The combination damage induced by mechanical interference, in reality, is more likely to happen. In this paper, numerical models on pipes with combined dent and metal loss in terms of a notch are developed and validated through tests (diameter-to-thickness ratio D/t of test pipes around 21), capable of predicting the residual ultimate...