The reactivity theories and characterization studies for metal-containing zeolites are often focused on probing the metal sites. We present a detailed computational study of the reactivity of Zn-modified BEA zeolite towards C-H bond activation of the methane molecule as a model system that highlights the importance of representing the active site as the whole reactive ensemble integrating the extra-framework ZnEF2+ cations, framework oxygens (OF2−), and the confined space of the zeolite pores. We demonstrate that for our model system the relationship between the Lewis acidity, defined by the probe molecule adsorption energy, and the activation energy for methane C-H bond cleavage performs with a determination coefficient R2 = 0.55. This suggests that the acid properties of the localized extra-framework cations can be used only for a rough assessment of the reactivity of the cations in the metal-containing zeolites. In turn, studying the relationship between the activation energy and pyrrole adsorption energy revealed a correlation, with R2 = 0.80. This observation was accounted for by the similarity between the local geometries of the pyrrole adsorption complexes and the transition states for methane C-H bond cleavage. The inclusion of a simple descriptor for zeolite local confinement allows transferability of the obtained property-activity relations to other zeolite topologies. Our results demonstrate that the representation of the metal cationic species as a synergistically cooperating active site ensembles allows reliable detection of the relationship between the acid properties and reactivity of the metal cation in zeolite materials.@en

The intermediates formed upon the interaction of methane with Cu-modified ZSM-5 zeolites (Cu/H-ZSM-5) have been analyzed with solid-state NMR spectroscopy and DFT methods. Methane activation by Cu/H-ZSM-5 zeolites gives rise to three distinct surface methoxy-like species (-O-CH3) detected by 13C MAS NMR spectroscopy with specific chemical shifts in the range of 53-63 ppm. DFT calculations on representative cluster models of different sites potentially present in Cu/H-ZSM-5 have been used to assign these signals to (i) methanol adsorbed on two neighboring Cu sites (Cu-(HOCH3)-Cu, 62.6 ppm), (ii) methanol adsorbed on zeolite Brønsted acid sites (52.9 ppm), and (iii) lattice-bound methoxy groups (Si-O(CH3)-Al, 58.6). The formation of these methoxy-like intermediates depends on the Cu loading and, accordingly, the type of Cu species in the Cu/H-ZSM-5 zeolite. For the sample with low (0.1 wt %) Cu loading containing exclusively mononuclear isolated Cu species, only the intermediates ii and iii have been detected. The Cu-bound intermediate (i) is formed upon methane activation by multinuclear Cu sites featuring Cu-O-Cu bridging moieties present in the materials with relatively higher Cu loading (1.38 wt %). The presented results indicate that methane activation by Cu/H-ZSM-5 can be promoted by both mono- and multinuclear Cu species confined in the zeolite matrix.@en

Selective dimerization of ethene to 2-butene on Zn2+-containing ZSM-5 zeolite (Zn2+/ZSM-5) at 296-523 K has been discovered. The intermediate but-3-en-1-ylzinc species is identified with 13C CP/MAS NMR and Fourier transform infrared spectroscopy. The density functional theory study of two alternative dimerization pathways reveals that the intermediate is formed with the involvement of the saturated bridged dimeric Zn-(CH2)4-O species. It is also shown that ethene conversion to 2-butene increases with the increase in the quantity of Brønsted acid sites in Zn2+/ZSM-5 zeolite; however, the selectivity of the reaction decreases. The results obtained are of potential interest for developing industrially relevant Zn-containing zeolite catalysts for the selective conversion of ethene to 2-butene. @en

The influence of the model and method choice on the DFT predicted 13C NMR chemical shifts of zeolite surface methoxide species has been systematically analyzed. Twelve 13C NMR chemical shift calculation protocols on full periodic and hybrid periodic-cluster DFT calculations with varied structural relaxation procedures are examined. The primary assessment of the accuracy of the computational protocols has been carried out for the Si-O(CH3)-Al surface methoxide species in ZSM-5 zeolite with well-defined experimental NMR parameters (chemical shift, δ(13C) value) as a reference. Different configurations of these surface intermediates and their location inside the ZSM-5 pores are considered explicitly. The predicted δ value deviates by up to ±0.8 ppm from the experimental value of 59 ppm due to the varied confinement of the methoxide species at different zeolite sites (model accuracy). The choice of the exchange-correlation functional (method accuracy) introduces ±1.5 ppm uncertainty in the computed chemical shifts. The accuracy of the predicted 13C NMR chemical shifts for the computational assignment of spectral characteristics of zeolite intermediates has been further analyzed by considering the potential intermediate species formed upon methane activation by Cu/ZSM-5 zeolite. The presence of Cu species in the vicinity of surface methoxide increases the prediction uncertainty to ±2.5 ppm. The full geometry relaxation of the local environment of an active site at an appropriate level of theory is critical to ensure a good agreement between the experimental and computed NMR data. Chemical shifts (δ) calculated via full geometry relaxation of a cluster model of a relevant portion of the zeolite lattice site are in the best agreement with the experimental values. Our analysis indicates that the full geometry optimization of a cluster model at the PBE0-D3/6-311G(d,p) level of theory followed by GIAO/PBE0-D3/aug-cc-pVDZ calculations is the most suitable approach for the calculation of 13C chemical shifts of zeolite surface intermediates.@en