After-treatment technologies are adopted in automobiles and ships to meet strict emission regulations, which increase exhaust back pressure. Furthermore, underwater exhaust systems are employed on board ships to save space, and reduce noise and pollution on working decks. However, water at exhaust outlet creates a flow resistance for the exhaust gases, which adds to the back pressure. High back pressure reduces the operating limits of an engine, increases fuel consumption, and can lead to exhaust smoke. While the effects of back pressure were recognized earlier, there is a lack of experimentally validated research on the performance limits of a turbocharged, marine diesel engine against high back pressure for the entire operating window. The focus of this research is to provide a comprehensive understanding of back pressure effects on marine diesel engine performance, and to identify limits of acceptable back pressure along with methods to tackle high back pressure. In this work, a pulse turbocharged, medium speed, diesel engine was tested at different loads and engine speeds; against different values of static back pressure. Additionally, mean value model simulations could be validated and were used to compare the performance of a pulse and constant pressure turbocharged engine against high back pressures of 1 meter water-column (mWC), and for two different values of valve overlap. Using the validated simulation model, the conceptual basis for the engine smoke limit as well as for thermal overloading is investigated. A methodology applying the conceptual basis to define boundaries of acceptable back pressures has been presented in this paper. A combination of pulse turbocharger systems and small valve overlap showed to significantly improve back pressure handling capabilities of engines.@en

Underwater exhaust systems are employed on board ships to allow zero direct emissions to the atmosphere with the possibility of drag reduction via exhaust gas lubrication. However, underwater expulsion of exhaust gases imparts high and dynamic back pressure, which can fluctuate in amplitude and time period as a ship operates in varying sea-states depending on its geographical location and weather conditions. Therefore, this research aims to experimentally investigate the performance of a marine diesel engine against varying amplitudes and time periods of dynamic back pressure at different sea-states due to underwater exhaust systems. In this study, a turbocharged, marine diesel engine was tested at different loads along the propeller curve against dynamic back pressure waves produced by controlling an electronic butterfly valve placed in the exhaust line after the turbine outlet. Engine performance was investigated against single and multiple back pressure waves of varying amplitudes and wave periods based on real sea-state conditions and wave data. We found that the adverse effects of dynamic back pressure on engine performance were less severe than those found against static back pressure. Governor control and turbocharger dynamics play an important role in keeping the fuel penalty and thermal loading low against dynamic back pressure. Therefore, a marine engine may be able to handle much higher levels of dynamic back pressures when operating with underwater exhaust systems in higher sea-states.@en