We present a new version of our optical model for solar cell simulation: GenPro4. Its working principles are briefly explained. The model is suitable for quickly and accurately simulating a wide range of wafer-based and thin-film solar cells. Especially adjusting layer thicknesses to match the currents in multijunction devices can be done with a minimum of computational cost. To illustrate this, a triple junction thin-film silicon solar cell is simulated. The simulation results show very good agreement with external quantum efficiency measurements. The application of an MgF2 antireflective coating or an antireflective foil with pyramid texture is considered. Their effects on the implied photocurrents of top, middle, and bottom cells are investigated in detail.@en

In a monolithic perovskite/c-Si tandem device, the perovskite top cell has to be deposited onto a flat c-Si bottom cell without anti-reflective front side texture, to avoid fabrication issues. We use optical simulations to analyze the reflection losses that this induces. We then systematically minimize these losses by introducing surface textures in combination with a so-called burial layer to keep the perovskite top cell flat. Optical simulations show that, even with a flat top cell, the monolithic perovskite/c-Si tandem device can reach a matched photocurrent density as high as 19.57 mA/cm2.@en