An electron confined by a semiconductor quantum dot (QD) can be displaced by changes in electron occupations of surrounding QDs owing to the Coulomb interaction. For a single-spin qubit in an inhomogeneous magnetic field, such a positional displacement of the host electron results in a qubit energy shift, which must be handled carefully for high-fidelity operations. Here, we spectroscopically investigate the qubit energy shift induced by changes in charge occupations of nearby QDs for a silicon single-spin qubit in a magnetic field gradient. Between two different charge configurations of an adjacent double QD, a spin qubit shows an energy shift of about 4 MHz, which necessitates strict management of electron positions over a QD array. We confirm a correlation between the qubit frequency and the charge configuration by using a postselection analysis.

Silicon-based spin qubits offer a potential pathway toward realizing a scalable quantum computer owing to their compatibility with semiconductor manufacturing technologies. Recent experiments in this system have demonstrated crucial technologies, including high-fidelity quantum gates and multiqubit operation. However, the realization of a fault-tolerant quantum computer requires a high-fidelity spin measurement faster than decoherence. To address this challenge, we characterize and optimize the initialization and measurement procedures using the parity-mode Pauli spin blockade technique. Here, we demonstrate a rapid (with a duration of a few μs) and accurate (with >99% fidelity) parity spin measurement in a silicon double quantum dot. These results represent a significant step forward toward implementing measurement-based quantum error correction in silicon.

Because of their long coherence time and compatibility with industrial foundry processes, electron spin qubits are a promising platform for scalable quantum processors. A full-fledged quantum computer will need quantum error correction, which requires high-fidelity quantum gates. Analyzing and mitigating gate errors are useful to improve gate fidelity. Here, we demonstrate a simple yet reliable calibration procedure for a high-fidelity controlled-rotation gate in an exchange-always-on Silicon quantum processor, allowing operation above the fault-tolerance threshold of quantum error correction. We find that the fidelity of our uncalibrated controlled-rotation gate is limited by coherent errors in the form of controlled phases and present a method to measure and correct these phase errors. We then verify the improvement in our gate fidelities by randomized benchmark and gate-set tomography protocols. Finally, we use our phase correction protocol to implement a virtual, high-fidelity, controlled-phase gate.