A laboratory fed-batch reactor has been used to study under controlled conditions the performance of partial nitritation/anammox for the 200,000 m3/day step-feed activated sludge process at the Changi Water Reclamation Plant, Singapore. The similarity of the concentrations of NH4, NO2, NO3, PO4, suspended chemical oxygen demand (sCOD), pH, and alkalinity (ALK) between the on-site process and laboratory reactor illustrates that the laboratory fed-batch reactor can be used to simulate the site performance. The performance of the reactor fed by primary effluent illustrated the existence of anammox and heterotrophic denitrification and apparent excessive biological phosphorus removal as observed from the site. The performance of the reactor fed by final effluent proved the presence of anammox process on site. Both the laboratory reactor and on-site process showed that higher influent 5-day biochemical oxygen demand/total nitrogen (BOD5/TN) (COD/TN) ratio increases the nitrogen removal efficiency of the process.@en

Biofilms are complex biostructures that appear on all surfaces that are regularly in contact with water. They are structurally complex, dynamic systems with attributes of primordial multicellular organisms and multifaceted ecosystems. The presence of biofilms may have a negative impact on the performance of various systems, but they can also be used beneficially for the treatment of water (defined herein as potable water, municipal and industrial wastewater, fresh/brackish/salt water bodies, groundwater) as well as in water stream-based biological resource recovery systems. This review addresses the following three topics: (1) biofilm ecology, (2) biofilm reactor technology and design, and (3) biofilm modeling. In so doing, it addresses the processes occurring in the biofilm, and how these affect and are affected by the broader biofilm system. The symphonic application of a suite of biological methods has led to significant advances in the understanding of biofilm ecology. New metabolic pathways, such as anaerobic ammonium oxidation (anammox) or complete ammonium oxidation (comammox) were first observed in biofilm reactors. The functions, properties, and constituents of the biofilm extracellular polymeric substance matrix are somewhat known, but their exact composition and role in the microbial conversion kinetics and biochemical transformations are still to be resolved. Biofilm grown microorganisms may contribute to increased metabolism of micro-pollutants. Several types of biofilm reactors have been used for water treatment, with current focus on moving bed biofilm reactors, integrated fixed-film activated sludge, membrane-supported biofilm reactors, and granular sludge processes. The control and/or beneficial use of biofilms in membrane processes is advancing. Biofilm models have become essential tools for fundamental biofilm research and biofilm reactor engineering and design. At the same time, the divergence between biofilm modeling and biofilm reactor modeling approaches is recognized.@en

Exploring alternative water sources and improving the efficiency of energy uses are crucial approaches to strengthening the water-energy securities and achieving carbon mitigations in sub(tropical) coastal cities. Seawater use for toilet flushing and district cooling systems is reportedly practical for achieving multiaspect benefits in Hong Kong. However, the currently followed practices are yet to be systematically evaluated for scale expansions and system adaptation in other coastal cities. The significance of using seawater to enhance local water-energy securities and carbon mitigations in urban areas remains unknown. Herein, we developed a high-resolution scheme to quantify the effects of the large-scale urban use of seawater on a city’s reliance on non-local and non-natural water and energy supplies and its carbon mitigation goals. We applied the developed scheme in Hong Kong, Jeddah, and Miami to assess diverse climates and urban characteristics. The annual water and energy saving potentials were found to be 16-28% and 3-11% of the annual freshwater and electricity consumption, respectively. Life cycle carbon mitigations were accomplished in the compact cities of Hong Kong and Miami (2.3 and 4.6% of the cities’ mitigation goals, respectively) but not in a sprawled city like Jeddah. Moreover, our results suggest that district-level decisions could result in optimal outcomes supporting seawater use in urban areas.@en

A full-scale wastewater treatment plant in China experienced unintentional anammox bacterial enrichment on biofilm carriers placed in the anaerobic and anoxic zones of an anaerobic/anoxic/oxic process under ambient temperatures and without bioaugmentation. Here, we show that microaerophilic conditions resulting from air scouring needed for biofilm carrier suspension in the anaerobic/anoxic zones can support a robust nitritation/anammox process. Results from an in situ on/off air scouring test showed that air scouring strongly induced both ammonia and total inorganic nitrogen removal in the anaerobic/anoxic zones. Ammonium concentration in the anaerobic and anoxic tanks remained constant or even slightly increased when air scouring was off, indicating that air scouring made a noticeable difference in nitrogen profiles in the anaerobic/anoxic zones. Various batch tests further indicated that partial denitrification is not likely to generate nitrite for anammox bacteria. Robust nitritation, and anammox on the carriers, can occur at low dissolved oxygen conditions, as measured in the full-scale facility. The observations show that mainstream deammonification without sidestream bioaugmentation at moderate temperature is feasible and further optimization by a more dedicated design can result in improved nitrogen removal in cases when chemical oxygen demand is limited in mainstream wastewater treatment. Practitioner points: Microaerophilic conditions in a full-scale IFAS reactor caused mainstream anammox in moderate temperate area. Robust nitritation, and anammox on the carriers, can occur at low dissolved oxygen conditions in anaerobic/anoxic tanks with air scouring. Anammox can function well with conventional nitrification and denitrification process at mainstream conditions for stable nitrogen removal.@en

Driven by energy neutral/positive of wastewater treatment plants, significant efforts have been made on the research and development of mainstream partial nitritation and anaerobic ammonium oxidation (anammox) (PN/A) (deammonification) process since the early 2010s. To date, feasibility of mainstream PN/A process has been demonstrated and proven by experimental results at various scales although with the low loading rates and elevated nitrogen concentration in the effluent at low temperatures (15–10 °C). This review paper provides an overview of the current state of research and development of mainstream PN/A process and critically analyzes the bottlenecks for its full-scale application. The paper discusses the following: (i) the current status of research and development of mainstream PN/A process; (ii) the interactions among aerobic ammonium-oxidizing bacteria, aerobic nitrite-oxidizing bacteria, anammox bacteria, and heterotrophic bacteria; (iii) the suppression of aerobic nitrite-oxidizing bacteria; (iv) process and bioreactors; and (v) suggested further studies including efficient and robust carbon concentrating pretreatment, deepening of understanding competition between autotrophic nitrogen-converting organisms, intensification of biofilm anammox activity, reactor design, and final polishing.@en

Since about the 1990s China has achieved remarkable progress in urban sanitation. The country has built very extensive infrastructure for wastewater treatment, with 94.5% treatment coverage in urban areas and legally mandated nation-wide full nutrient removal implemented. However, municipal wastewater treatment plants (WWTPs) in China are still confronted with issues rooted in the unique sewage characteristics. This study compares energy recovery, cost of nutrient removal and sludge production between Chinese municipal WWTPs and those in countries with longer wastewater treatment traditions, and highlights the cause-effect relationships between Chinese sewage characteristics-high inorganic suspended solids (ISS) loads, and low COD and C/N ratio, and municipal WWTP process performance in China. Integrated design and operation guidelines for municipal WWTPs are imperative in relation to the unique sewage characteristics in China. Cost-effective measures and solutions are proposed in the paper, and the potential benefits of improving the sustainability of municipal WWTPs in China are estimated.@en

China has achieved significant progress on wastewater treatment and aquatic environmental protection. However, leakage (in- and exfiltration) of sewer systems is still an issue. By using the statistical data of water and wastewater in 2016 in China, and the person loads (PLs) of water and wastewater in Singapore, the leakage fractions of hydraulic flow, organic carbon (COD), nitrogen (N) and phosphorus (P) mass loading, and in-sewer COD biological removal in the sewer systems of China (except Hong Kong, Macau and Taiwan), Shanghai, Guangzhou and Beijing were reported for the first time. The fractions of hydraulic flow infiltration (13%, Shanghai and Guangzhou) and exfiltration (39%, China) were calculated. Except Beijing, whose sewer networks are under appropriate management with small leakage fractions, the exfiltration fractions of COD (including in-sewer biological COD removal) ranged from 41% (Shanghai) to 66% (China) and averaged 55%; N ranged from 18% (Shanghai) to 48% (China) and averaged 33%; and P ranged from 23% (Shanghai and Guangzhou) to 44% (China) and averaged 30%. The exfiltrated sewage, COD, N and P not only wastes resources, but also contaminates the aquatic environment (especially groundwater) and contributes to 'black and odorous water bodies'. In- and exfiltration in the sewer network leads to low influent COD concentration, C/N ratio and high inorganic solids and inert particulate COD concentrations of many municipal wastewater treatment plants (WWTPs) causing high cost for nutrient removal, poor resource recovery, additional reactor/settler volume requirement and other operational problems. Therefore, tackling sewer leakage is of primary importance to today's environment in China. Recommendations for the inspection of sewer systems and the rehabilitation of damaged sewers as well as the development of design and operation guidelines of municipal WWTPs tailored to the specific local sewage characteristics and other conditions are proposed.@en

Mainstream partial nitritation and Anammox (PN/A) has been observed and studied in the step-feed activated sludge process at the Changi water reclamation plant (WRP), which is the largest WRP (800,000 m3/d) in Singapore. This paper presents the study results for enhanced biological phosphorus removal (EBPR) co-existing with PN/A in the activated sludge process. Both the in-situ EBPR efficiency and ex-situ activities of phosphorus release and uptake were high. The phosphorus accumulating organisms were dominant, with little presence of glycogen accumulating organisms in the activated sludge. Chemical oxygen demand (COD) mass balance illustrated that the carbon usage for EBPR was the same as that for heterotrophic denitrification, owing to autotrophic PN/A conversions. This much lower carbon demand for nitrogen removal, compared to conventional biological nitrogen removal, made effective EBPR possible. This paper demonstrated for the first time the effective EBPR co-existence with PN/A in the mainstream in a large full-scale activated sludge process, and the feasibility to accommodate EBPR into the mainstream PN/A process. It also shows EBPR can work under warm climates.@en

A researcher or practitioner can employ a biofilm model to gain insight into what controls the performance of a biofilm process and for optimizing its performance. While a wide range of biofilmmodeling platforms is available, a good strategy is to choose the simplest model that includes sufficient components and processes to address the modeling goal. In most cases, a onedimensional biofilm model provides the best balance, and good choices can range from handcalculation analytical solutions, simple spreadsheets, and numerical-method platforms. What is missing today is clear guidance on how to apply a biofilm model to obtain accurate and meaningful results. Here, we present a five-step framework for good biofilm reactor modeling practice (GBRMP). The first four steps are (1) obtain information on the biofilm reactor system, (2) characterize the influent, (3) choose the plant and biofilm model, and (4) define the conversion processes. Each step demands that the model user understands the important components and processes in the system, one of the main benefits of doing biofilm modeling. The fifth step is to calibrate and validate the model: System-specific model parameters are adjusted within reasonable ranges so that model outputs match actual system performance. Calibration is not a simple 'by the numbers' process, and it requires that the modeler follows a logical hierarchy of steps. Calibration requires that the adjusted parameters remain within realistic ranges and that the calibration process be carried out in an iterative manner. Once each of steps 1 through 5 is completed satisfactorily, the calibrated model can be used for its intended purpose, such as optimizing performance, trouble-shooting poor performance, or gaining deeper understanding of what controls process performance.@en

Mainstream partial nitritation/anammox (PN/A), coupled with excess biological phosphorus removal, in a 200,000 m3/d step-feed activated sludge process (Train 2) in the Changi Water Reclamation Plant (WRP), Singapore, has been studied and reported. This paper presents an overview of process performance and the microbial community during the period from 2011 to 2016. The site data showed that, along with the reduction of dissolved oxygen (DO) from 1.7 to 1.0 mg O2/L in the aeration zones, the concentrations of ammonium and nitrate of the final effluent increased, while nitrite decreased, resulting in an increase of 2.4 mg N/L of total inorganic nitrogen. Autotrophic nitrogen removal was higher than heterotrophic biological nitrogen removal under higher DO concentration conditions, but decreased under low DO operating condition. These macro-scale changes were caused by shifts of the nitrogen-converting microbial community. The ammonia oxidizing bacteria (AOB) population abundance was reduced by 30 times, while the nitrite oxidizing bacteria (NOB) population abundance and specific activity increased significantly with a shift of dominant genus from Nitrobacter to Nitrospira. The ratio of AOB and NOB specific activities were reduced from 12.8 to 1.6, and the ex situ nitrite accumulation ratio reduced from 76% to 29%. Changes in the microbial community and overall process performance illustrated that, compared to the excellent NOB suppression under high DO conditions, NOB were more active after the DO concentration reduction despite still being partly suppressed. This case study demonstrated, for the first time, the influence of DO reduction on the nitrogen conversion microbial community and PN/A process performance for a suspended growth system. Its relevance to biofilm and hybrid PN/A processes is also discussed.@en

Since about the 1990s China has achieved remarkable progress in urban sanitation. The country has built very extensive infrastructure for wastewater collection and treatment, with 94.5% coverage in urban areas and legally mandated nation-wide full nutrient removal implemented. However, municipal wastewater treatment plants (WWTPs) in China are still confronted with several bottlenecks rooted in the unique sewage characteristics, which are caused by leakage of sewer systems. This study compared energy recovery, cost of nutrient removal and sludge production between Chinese municipal WWTPs and those in countries with longer wastewater treatment traditions, and, on the basis of theoretical analysis, highlighted the cause-effect relationships between Chinese sewage characteristics, including high inorganic suspended solids (ISS) loads, low COD, and low ρ(C)/ρ(N) and municipal WWTP process performance in China. It proposes that China needs to develop guidelines for the design of urban wastewater treatment processes based on its own unique wastewater quality characteristics. In view of the time-consuming construction and rehabilitation of sewer systems, the improvement of the efficiency and sustainability of existing urban sewage treatment plants should be promoted simultaneously with sewer rehabilitation and design guidelines. To this end, cost-effective technical measures and solutions need to be selected and implemented. This paper proposed to strengthen work in three areas: improving the efficiency of grit removal, applying sludge fermentation and anaerobic digestion, and optimizing the existing and developing low-carbon biological nitrogen removal processes, and estimated the potential benefits of implementing these technical measures. The necessity of strengthening the application research of municipal sewage treatment oriented to the improvement of engineering applications was emphasized.@en

Restoring and improving harmony between human activities and nature are essential to human well-being and survival. The role of wastewater infrastructure is evolving toward resource recovery to address this challenge. Yet, existing design approaches for wastewater systems focus merely on technological aspects of these systems. If system design could take advantage of natural ecological processes, it could ensure infrastructure development within ecological constraints and maximize other benefits. To test this hypothesis, we illustrate a data-driven, systems-level approach that couples natural ecosystems and the services they deliver to explore how sustainability principles could be embedded into the life phases of wastewater systems. We show that our design could produce outcomes vastly superior to those of conventional paradigms that focus on technologies alone, by enabling high-level recovery of both energy and materials and providing substantial benefits to offset a host of unintended environmental effects. This integrative study advances our understanding and suggests approaches for regaining a balance between satisfying human demands and maintaining ecosystems.@en

Combining the practices and experiences learned in the recent years in China and the relevant international practices this paper raises and discusses the four topics, which are related to improve the efficiencies of urban sewage systems up-grading and operation in China, including: extraneous water intrusion and overflow of separate sewer system, sewage concentration, the necessity to expand sewage treatment capacity, self-clean flow velocity in sewers. A summary and some suggestions are presented at the end of the paper.@en

Combining the practices and experiences learned in the recent years in China and the relevant international practices this paper raises and discusses the four topics, which are related to improve the efficiencies of urban sewage systems up-grading and operation in China, including: extraneous water intrusion and overflow of separate sewer system, sewage concentration, the necessity to expand sewage treatment capacity, self-clean flow velocity in sewers. A summary and some suggestions are presented at the end of the paper.@en