Soundfield diffuseness in rooms is considered a fundamental aspect of a high-quality room acoustics. Since early studies by Hodgson up to more recent studies of Shtrepi and Embrechts, it was shown that high levels of sound diffuseness could guarantee blending of music, as well as spatial sound perception by listeners, and this could enhance the global indoor acoustic quality. Conversely, Italian-style Opera houses represent an important architectural place, in which the special features of the rich decorations, and the specific characteristics of the volume, give a unique atmosphere, including a peculiar psycho-acoustics impression. However, some geometric properties of the opera houses could influence the global acoustic perception. The shape of the marmorino wall on the stalls, as well as the parallelism of the lateral walls in the boxes, often causes a lack of spaciousness and sometimes in the worst cases provokes focalization. This phenomenon leads to design special devices that could be inserted in the theatres, to avoid focalization, even if they are rarely accepted. This article deals with the design of some acoustic diffusing panels and their functioning in three different theatres, combining both acoustics needs with architectural constraints. The article starts analysing and commenting on the issues that resulted from the measurements conducted in an Italian opera house. In the following step, three examples of the design of diffusing panels are proposed. Finally, the results of diffusion and scattering coefficient of panels realized in the last theatre considered here are reported.@en

This paper investigates the relationship between Indoor Environmental Quality index (IEQ): thermal comfort index and indoor temperature trend in moderate thermal environments, in buildings that belong to the Class A with reference to the Energy Performance of Building Directive (EPBD). The work consists of the measurement of IAQ and energy efficiency in a residential building located in centre-north of Italy, namely Ravenna. The results of the measurements, as well as the PMV-PPD indexes, are presented and commented. These indexes could be a criteria to test if EPBD labelling building could be coherent with EN 15251 requirements.@en

The transition towards energy systems characterized by high share of weather dependent renewable energy sources poses the problem of balancing the mismatch between inflexible production and inelastic demand with appropriate solutions, which should be feasible from the techno-economic as well as from the environmental point of view. Temporal and spatial decoupling of supply and demand is an important element to be considered for the evolution of built environment, especially when creating sectorial level planning strategies and policies. Energy efficiency measures, on-site generation technologies, demand side management and storage systems are reshaping energy infrastructures and energy market, together with innovative business models. Optimal design and operational choices in buildings are systemic, but buildings are also nodes in infrastructural systems and model-based approaches are generally used to guide decision-making processes, at multiple scale. Built environment could represent a suitable intermediate scale of analysis in Multi-Level Perspective planning, collocated among infrastructures and users. Therefore, the spatial and temporal scalability of modelling techniques is analyzed, together with the possibility of accommodating multiple stakeholders’ perspectives in decision-making, thereby finding synergies across multiple sectors of energy demand. For this reason, the paper investigates first the cross-sectorial role of models in the energy sector, because the use of common principles and techniques could stimulate a rapid development of multi-disciplinary research, aimed at sustainable energy transitions. Further, relevant issues for the integration of energy storage in built environment are described, considering their relationship with energy efficiency measures, on-site generation and demand side management.@en

Simple and robust data analysis methodologies are crucial to learn insights from measured data and reduce the performance gap in building stock. For this reason, continuous performance monitoring should become a more diffuse practice in order to improve our design and operation strategies for the future. The research presented aims to highlight potential links between experimental approaches for test-facilities and methods and tools used for continuous performance monitoring, at the state of the art. In particular, we explore the relation between ISO 9869:2014 method for in-situ measurement of thermal transmittance (U) and regression-based monitoring approaches, such as co-heating test and energy signature, for heat load coefficient (HLC) and solar aperture (gA) estimation. In particular, we highlight the robustness and scalability of these monitoring techniques, considering relevant issues in current integrated engineer design perspective. These issues include, among others, the necessity of limiting the number of a sensors to be installed in buildings, the possibility of employing both experimental and real operation data and, finally, the possibility to automate and perform monitoring at multiple scales, from single components, to individual buildings, to building stock and cities.@en

Stationary and dynamic heat and mass transfer analyses of building components are an essential part of energy efficient design of new and retrofitted buildings. Generally, a single constant thermal conductivity value is assumed for each material layer in construction components. However, the variability of thermal conductivity may depend on many factors; temperature and moisture content are among the most relevant ones. A linear temperature dependence of thermal conductivity has been found experimentally for materials made of inorganic fibers such as rockwool or fiberglass, showing lower thermal conductivities at lower temperatures. On the contrary, a nonlinear temperature dependence has been found for foamed insulation materials like polyisocyanurate, with a significant deviation from linear behavior. For this reason, thermal conductivity assumptions used in thermal calculations of construction components and in whole-building performance simulations have to be critically questioned. This study aims to evaluate how temperature affects thermal conductivity of materials in building components such as exterior walls and flat roofs in different climate conditions. Therefore, experimental conductivities measured for four common insulation materials have been used as a basis to simulate the behavior of typical construction components in three different Italian climate conditions, corresponding to the cities of Turin, Rome, and Palermo.@en

The identification of techno-economically feasible decarbonisation paths and sustainability transitions for the built environment is a necessary task for research today and building stock renovation processes can act in synergy with innovative economic and technological development paradigms to achieve different types of benefits such as economic growth and employment, together with resource efficiency and sustainability for the whole sector. The research presented aims at selecting the most relevant data analysis processes and techniques to respond to practical technical questions and to support decision-making in the built environment, at multiple scales of analysis, from individual buildings, to building stock and urban environment. The research aims to indicate in this way the possibility to join the micro-scale view, involving technological and behavioral issues in buildings, and the macro-scale view, involving strategic problems at market and policy levels for energy and sustainability planning. Further, the combined use of modelling techniques with large scale data acquisition and processing could guarantee multiple feed-backs from measured data, useful for the evolution, first of all, of design and operation practices in building but also, more in general, of the whole value chain of the sector. A synthesis and integration of modelling methodologies is presented through case studies, showing a path to improve transparency of performance assessment across building life cycle phases. Finally, multivariate data visualization techniques are presented to ease wider applicability of the described numerical techniques.@en

During the renovation of auditoria and concert halls, the acoustic quality is normally evaluated from measurements of impulse responses. One possibility for evaluating the acoustic quality from the measurements (the simulations) consists of convolving anechoic music with the measured (or simulated) impulse responses. In this way, a psycho-acoustic test is achieved using a virtual sound field representation. The listening room ‘Arlecchino’ at the University of Bologna includes ambisonics (up to fifth order) and stereo-dipole playback for virtual reproduction of sound in rooms. In this article, the effectiveness of the listening room ‘Arlecchino’ is first analysed, comparing acoustic parameters obtained from binaural impulse responses measured in some opera houses (in Italy) and auditorium (in Japan) with those virtually measured after the virtual reconstruction obtained in the listening rooms. The similarity between real and virtual sound fields, has been evaluated by comparing different acoustic parameters calculated by real and virtual sound fields, in four halls in different configurations, by means of the stereo-dipole method. In the second part of the article, the listening room was used to analyse the variation in interaural cross-correlation measurements in rooms obtained considering different anechoic sound signals convolved with the binaural impulse responses, to quantify the variation of the interaural cross correlation with different motifs. For this purpose, two different musical instrument digital interface musical motifs, very different from each other for their music characteristics, have been considered. Moreover, for each musical motif, different sound characteristics (i.e. different musical instruments) were considered, to consider both the rhythmic and timbre aspect.@en