The interest in urban air mobility as a potential solution for urban congestion is steadily growing. Air operations in urban areas can present added complexity as compared with traditional air traffic management. As a result, it is necessary to test and develop novel airspace designs and rules. As airspace in urban areas is a scarce resource, creating structures and rules that effectively utilise the airspace is an important challenge. This work specifically focuses on layered airspace design in urban operations constrained to fly between the existing buildings. Two design parameters of airspace design are investigated with two sub-experiments. Sub-experiment 1 investigates layer function assignment by comparing concepts from previous research with different layer assignment distributions. Sub-experiment 2 investigates the flight rules of vertical distribution of traffic within the airspace, to determine whether this is best achieved in a static (pre-allocated) or dynamic manner. Both sub-experiments analyse the overall system safety, route duration, and route distance under increasing traffic demand. Results reveal that the importance of cruising airspace is apparent at high densities. Results also shows that the safest layer allocation flight rule depends on the traffic density. At lower densities dynamic rules help to spread traffic locally. However, when the airspace is saturated it is safer to pre-allocate flight heights if achieved uniformly.

Unmanned Aircraft Systems (UAS) Traffic Management (UTM) is an active research subject as its proposed applications are increasing. UTM aims to enable a variety of UAS operations, including package delivery, infrastructure inspection, and emergency missions. That creates the need for extensive research on how to incorporate such traffic, as conventional methods and operations used in Air Traffic Management (ATM) are not suitable for constrained urban airspace. This paper proposes and compares several traffic capacity balancing methods developed for a UTM system designed to be used in highly dense, very low-level urban airspace. Three types of location-based dynamic traffic capacity management techniques are tested: street-based, grid-based, and cluster-based. The proposed systems are tested by simulating traffic within mixed (constrained and open) urban airspace based on the city of Vienna at five different traffic densities. Results show that using local, area-based clustering for capacity balancing within a UTM system improves safety, efficiency, and capacity metrics, especially when simulated or historical traffic data are used.

The use of small aircraft for a wide range of missions in urban airspace is expected to increase in the future. In Europe, efforts have been invested into developing a unified system, called U-space, to manage aircraft in dense very-low-level urban airspace. The Metropolis II project aimed to research what degree of centralisation an air traffic management system should use in such airspace. The paper at hand is a follow-up, and investigates improvements that can be brought to the tactical conflict prevention, detection, and resolution module of such a system in order to harmonise these components with an organic high-density U-space environment. The proposed improvements are: the prioritisation of vertical conflict prevention in intersections, the use of intent in detecting and resolving conflicts, and the use of heading-based manoeuvres in open airspace. Results show that the use of intent information in the conflict detection process, as well as the implementation of suitable tactical prevention procedures, can greatly increase airspace safety. Furthermore, the experiments revealed that the effectiveness of conflict resolution algorithms is highly dependent on the airspace rules and structure. This reiterates the potential for increasing the safety and efficiency of operations within constrained airspace if the tactical separation modules are unified with the other components of air traffic management systems for U-space.