Abstract The FASTER (Facilitating Analysis and Synthesis Technologies for Effective Reconfiguration) EU FP7 project, aims to ease the design and implementation of dynamically changing hardware systems. Our motivation stems from the promise reconfigurable systems hold for achieving high performance and extending product functionality and lifetime via the addition of new features that operate at hardware speed. However, designing a changing hardware system is both challenging and time-consuming. FASTER facilitates the use of reconfigurable technology by providing a complete methodology enabling designers to easily specify, analyze, implement and verify applications on platforms with general-purpose processors and acceleration modules implemented in the latest reconfigurable technology. Our tool-chain supports both coarse- and fine-grain FPGA reconfiguration, while during execution a flexible run-time system manages the reconfigurable resources. We target three applications from different domains. We explore the way each application benefits from reconfiguration, and then we asses them and the FASTER tools, in terms of performance, area consumption and accuracy of analysis.@en

Even though FPGAs are becoming more and more popular as they are used in many different scenarios like communications and HPC, the steep learning curve needed to work with this technology is still the major limiting factor to their full success. Many works proposed to mitigate this problem by creating a companion of tools to support the designer during the development phase for this technology. The EU FASTER Project aims at realizing an integrated toolchain that assists the designer in the steps of the design flow that are necessary to port a given application onto an FPGA device. The novelty of the framework relies in the fact that the partial dynamic reconfiguration, which FPGA devices can exploit, is seen as a first class citizen throughout the whole design flow. This work reports a case study in which the FASTER toolchain has been used to port a raytracer application onto the STM Spear prototyping embedded platform. The paper discusses the steps done for the realization of the prototype and the results obtained on the target device. It finally reports some improvements that can be exploited to improve the performance of the hardware implementation that has been realized.@en

While fine-grain, reconfigurable devices have been available for years, they are mostly used in a fixed functionality, "asic-replacement" manner. To exploit opportunities for flexible and adaptable run-time exploitation of fine grain reconfigurable resources (as implemented currently in dynamic, partial reconfiguration), better tool support is needed. The FASTER project aims to provide a methodology and a tool-chain that will enable designers to efficiently implement a reconfigurable system on a platform combining software and reconfigurable resources. Starting from a high-level application description and a target platform, our tools analyse the application, evaluate reconfiguration options, and implement the designer choices on underlying vendor tools. In addition, FASTER addresses micro-reconfiguration, verification, and the run-time management of system resources. We use industrial applications to demonstrate the effectiveness of the proposed framework and identify new opportunities for reconfigurable technologies.@en