Cell spheroids are in vitro multicellular model systems that mimic the crowded micro-environment of biological tissues. Their mechanical characterization can provide valuable insights in how single-cell mechanics and cell-cell interactions control tissue mechanics and self-organization. However, most measurement techniques are limited to probing one spheroid at a time, require specialized equipment and are difficult to handle. Here, we developed a microfluidic chip that follows the concept of glass capillary micropipette aspiration in order to quantify the viscoelastic behavior of spheroids in an easy-to-handle, more high-throughput manner. Spheroids are loaded in parallel pockets via a gentle flow, after which spheroid tongues are aspirated into adjacent aspiration channels using hydrostatic pressure. After each experiment, the spheroids are easily removed from the chip by reversing the pressure and new spheroids can be injected. The presence of multiple pockets with a uniform aspiration pressure, combined with the ease to conduct successive experiments, allows for a high throughput of tens of spheroids per day. We demonstrate that the chip provides accurate deformation data when working at different aspiration pressures. Lastly, we measure the viscoelastic properties of spheroids made of different cell lines and show how these are consistent with previous studies using established experimental techniques. In summary, our chip provides a high-throughput way to measure the viscoelastic deformation behavior of cell spheroids, in order to mechanophenotype different tissue types and examine the link between cell-intrinsic properties and overall tissue behavior.

Molecular dynamics simulations are carried out to compute the intradiffusion coefficients of H2 and O2 in H2O for temperatures ranging from 275.15 to 975.15 K and pressures ranging from 0.1 to 200 MPa. These conditions span vapor, liquid, and supercritical conditions. For the vast majority of the state points examined, experimental data are not available. The accuracy of six H2 and six O2 force fields is tested in reproducing the available experimentally measured densities, self-diffusivities, and shear viscosities of the pure gas and the intradiffusivity of the gas in H2O. Namely, we screen the H2 force fields developed by Buch, Vrabec and co-workers, Hirschfelder et al., Cracknell, a modified Silvera-Goldman, and Marx and Nielaba. For O2, the force fields by Bohn et al., Miyano, Coon et al., Hansen et al., Vrabec et al., and Watanabe are tested. Overall, the force fields by Buch and Bohn for H2 and O2, respectively, were found to perform the best, and combined with the TIP4P/2005 H2O force field are used to compute the intradiffusivities in the entire temperature and pressure range. The new data are used to develop an engineering model that can predict the H2 and O2 intradiffusivity in vapor, liquid, and supercritical H2O. The new model uses 11 parameters and has an accuracy of 4-11%. The model is validated with other available experimental and simulation data for H2 and O2 in H2O and pure H2O. Aside from the extensive collection of new data for the intradiffusivities of H2 and O2 in H2O, we present new data for the densities, shear viscosities, and self-diffusivities of pure TIP4P/2005 H2O in the same wide temperature and pressure range. The new data and the engineering model presented here can be used for the design and optimization of chemical processes, for which the knowledge of H2 and O2 diffusivities in H2O is important.