This study presents an early-stage design exploration of NRG-Foam, an innovative insulation material composed of cementitious foam doped with microencapsulated phase change materials (MPCMs). The study comprises the static part that utilizes life cycle assessment and life cycle costing assessment for getting insight into the impacts of the NRG-Foam production process and the dynamic part that identifies the trade-offs between performance characteristics of NRG-Foam using multi-objective optimization. The production of MPCMs was found to be a major contributor to environmental impacts while the addition of small amounts of reduced graphene oxide amplifies the impacts even further. The hot spot analysis pinpointed high electricity consumption as the main driver of environmental impacts. A multi-objective optimization analysis revealed trade-offs between performance characteristics, emphasizing the necessity of compromises during material development. The selection of the MPCM type was shown to be determinative of the final properties of NRG-Foam.

@en

To find materials with an appropriate response to THz radiation is key for the incoming THz technology revolution. Unfortunately, this region of the electromagnetic spectra remains largely unexplored in most materials. The present work aims at unveiling the most significant THz fingerprints of cement-based materials. To this end transmission experiments have been carried out over Ordinary Portland Cement (OPC) and geopolymer (GEO) binder cement pastes in combination with atomistic simulations. These simulations have calculated for the first time, the dielectric response of C-S-H and N-A-S-H gels, the most important hydration products of OPC and GEO cement pastes respectively. Interestingly both the experiments and simulations reveal that both varieties of cement pastes exhibit three main characteristic peaks at frequencies around ~0.6 THz, ~1.05 THz and ~1.35 THz, whose origin is governed by the complex dynamic of their water content, and two extra signals at ~1.95 THz and ~2.75 THz which are likely related to modes involving floppy parts of the dried skeleton.@en