Building Information Modelling (BIM) is a digitalisation tool that is widely adopted in construction industry. It is a three-dimensional digital replica of asset(s) such as buildings, which contain architectural information and building details (e.g. dimensions, materials, parts, and components). It has evolved from 2D CAD models (or blueprints) in the past to 3D CAD models embedded with information layers (e.g., construction time sequence or 4D-BIM), resulting in automation in construction. BIM has now been essential in various countries; for example, new UK BIM standards require asset owners to keep and maintain building information. BIM adopts an interoperable concept that can benefit the whole life-cycle assessment (LCA) and circularity of the built environments. Its applications extend to six dimensions (6D) where time sequence, cost and carbon footprint can now be reported in real time. These attributes are essential to stakeholders and critically help reduce any unexpected consumption and waste over the life cycle of a project. This study builds on the development of 6D BIM of an existing building to enrich circular value chains and stakeholder engagement. This paper highlights the development of 6D BIM, and, subsequently, the stakeholder interviews to address challenges, barriers, benefits, and effectiveness of 6D-BIM applications for stakeholder engagements across circular value chains. Snowballing sampling method has been used to identify stakeholder interviews to obtain new insights into the digital valorisation for stakeholder engagement. The outcome of this study will exhibit new insights and practical paradigms for BIM applications in built environments.@en

The increasing concern for safety and sustainability of structures is calling for the development of smart self-healing materials and preventive repair methods. The appearance of small cracks (<300 µm in width) in concrete is almost unavoidable, not necessarily causing a risk of collapse for the structure, but surely impairing its functionality, accelerating its degradation, and diminishing its service life and sustainability. This review provides the state-of-the-art of recent developments of self-healing concrete, covering autogenous or intrinsic healing of traditional concrete followed by stimulated autogenous healing via use of mineral additives, crystalline admixtures or (superabsorbent) polymers, and subsequently autonomous self-healing mechanisms, i.e. via, application of micro-, macro-, or vascular encapsulated polymers, minerals, or bacteria. The (stimulated) autogenous mechanisms are generally limited to healing crack widths of about 100–150 µm. In contrast, most autonomous self-healing mechanisms can heal cracks of 300 µm, even sometimes up to more than 1 mm, and usually act faster. After explaining the basic concept for each self-healing technique, the most recent advances are collected, explaining the progress and current limitations, to provide insights toward the future developments. This review addresses the research needs required to remove hindrances that limit market penetration of self-healing concrete technologies.@en