Advances in additive manufacturing (AM) techniques have enabled fabrication of highly porous titanium implants that combine the excellent biocompatibility of bulk titanium with all the benefits that a regular volume-porous structure has to offer (e.g. lower stiffness values comparable to those of bone). Clinical application of such biomaterials requires thorough understanding of their mechanical behavior under loading. Computational models have been therefore developed by various groups for prediction of their quasi-static mechanical properties. The fatigue behavior of AM porous biomaterials is, however, not well understood. In particular, computational models predicting the fatigue response of these structures are rare. That is primarily due to the fact that geometrical features present in computational model of fully porous structures span over multiple length scales. This makes the problem formidably expensive to solve computationally. Here, we propose a multi-scale modeling approach to alleviate this problem and solve the problem of crack propagation in AM porous biomaterials. In this approach, the area around the crack tip is modelled at the micro-scale (using beam elements) while the area far from the crack tip is modeled at the macro-scale (using volumetric elements). Compact-tension notched specimens were fabricated using a selective laser melting machine for validating the results of the presented modeling approach. The multi-scale computational model was found to be capable of predicting the fatigue response observed in experiments.@en

Additively manufacturing (AM) techniques make it possible to fabricate open-cell interconnected structures with precisely controllable micro-architectures. It has been shown that the morphology, pore size, and relative density of a porous structure determine its macro-scale homogenized mechanical properties and, thus, its biological performance as a biomaterial. In this study, we used analytical, numerical, and experimental techniques to study the elastic modulus, Poisson`s ratio, and yield stress of AM porous biomaterials made by repeating the same octahedral unit cell in all spatial directions. Analytical relationships were obtained based on both Euler-Bernoulli and Timoshenko beam theories by studying a single unit cell experiencing the loads and boundary conditions sensed in an infinite lattice structure. Both single unit cells and corresponding lattice structures were manufactured using AM and mechanically tested under compression to determine the experimental values of mechanical properties. Finite element models of both single unit cell and lattice structure were also built to estimate their mechanical properties numerically. Differences in the bulk mechanical properties of struts built in different directions were observed experimentally and were taken into account in derivation of the analytical solutions. Although the analytical and numerical results were generally in good agreement, the mechanical properties obtained by the Timoshenko beam theory were closer to numerical results. The maximum difference between analytical and numerical results for elastic modulus and Poisson's ratio was below 6%, while for yield stress it was about 13%, both occurring at the relative density of 50%. The maximum difference between the analytical and experimental values of the elastic modulus was <15% (relative density = 50%).@en

A micromechanical approach is used to study the damage initiation and nonlinear behavior of SiC/Ti composites subjected to a general complicated off-axis loading at elevated service temperatures. The effects of stress relaxation, interface damage together with fiber coating are considered. A cohesive zone model is applied to define the imperfect interface between the fiber and matrix. Introducing a unique failure criterion for all loading angles at different elevated service temperatures may be considered as the main contribution of this study. In order to simultaneously apply a combination of mechanical loadings and thermal residual stresses, appropriate periodic boundary conditions are imposed on the model. Predictions of the presented model show acceptable correlation with the reported experimental data at elevated temperatures. Results reveal that by increasing the service temperature, the strength of the composite is linearly degraded at fast rate especially at loading angles of 20° and 30°.@en

In this study, the mechanical properties (elastic modulus, yield stress, and Poisson's ratio) of rhombic dodecahedron (RD) unit cell has been studied analytically and numerically. For the analytical study, two well-known beam theories, namely Euler Bernoulli and Timoshenko, have been implemented. For validating the analytical relationships, finite element model of unit cell with repetitive boundary condition has been created. Moreover, the experimental results of recent studies have been used for validation. The results showed that the presented analytical relationships for RD lattice structure have good agreement with numerical and experimental results in all the relative densities particularly in lower relative densities. Besides, the analytical relationships based on Timoshenko theory showed closer results with numerical/experimental data. The derived analytical relationships for RD as well as the data extracted from CT scan images of a femur bone, were combined and used to create a porous femur implant model. The stress and strain distributions of the porous femur model under typical static compressive load due to human weight as well as axial rigidity of the model in the same loading conditions have been obtained and compared with the experimental results from other studies. The stress and strain distributions of the porous femur implant model based on RD unit cells, as well as its axial rigidity, showed good agreement with the results obtained for human femur.@en